Ford Crown Victoria Drivetrains

Essential Ford Crown Victoria Drivetrains

Felpro – Differential Cover Gasket (Part No.RDS 55081)

Differential Cover Gasket

from

$15.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)

Carrier Installation Kit For Ford 8.8" Differential

from

$134.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Ford 8.8″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

Taper Bearing Cup

from

$7.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Motive Gear – Differential Gear Install Kit (Part No.F8.8IK)

Differential Gear Install Kit

from

$35.99


Product Features:
  • MINI INSTALL KIT FORD 8.8
See More

Yukon Gear – Pinion Install Kit For Ford 8.8" Differential (Part No.13041)

Pinion Install Kit For Ford 8.8" Differential

from

$167.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 2009 and down Ford 8.8″
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Motive Gear – Differential Pinion Nut (Part No.379570S)

Differential Pinion Nut

from

$6.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Pro-King – Differential Internal Nest Kit (Part No.762B717A)

Differential Internal Nest Kit

from

$99.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Driveworks – Oil Seal (Part No.S-3604)

Oil Seal

from

$4.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Cross Pin Bolt (Part No.33067)

Cross Pin Bolt

from

$6.99
Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

Product Features:
  • Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Differential Pinion Shim Kit

from

$7.49
High-quality Differential Component Shim

Product Features:
  • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
See More

Yukon Gear – C/Clip (Part No.33083)

C/Clip

from

$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:
  • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
  • .150″ thick
See More

Yukon Gear – Forged Yoke For Ford 8.8" With A 1350 U/Joint Size (Part No.41051)

Forged Yoke For Ford 8.8" With A 1350 U/Joint Size

from

$246.99
Yukon forged yoke for Ford 8.8″ with a 1350 U/joint size (stronger than billet). 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″
  • 30 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • U-bolt style
See More

USA Standard Gear – Standard Spider Gear Set For Ford 8.8" Trac Loc Posi, 31 Spline (Part No.39032)

Standard Spider Gear Set For Ford 8.8" Trac Loc Posi, 31 Spline

from

$299.99
Product Features:
  • Spider gear kit
  • Fits Ford 8.8″ 31 spline Trac Loc positraction
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Driveshaft Flange Bolts

from

$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

USA Standard Gear – Pinion Installation Kit For ’09 & Down Ford 8.8 (Part No.60009)

Pinion Installation Kit For '09 & Down Ford 8.8

from

$119.99
8.8″ FORD 09 & DWN PINION KIT .

Product Features:
  • Fits 2009 and down Ford 8.8″
  • Uses Koyo bearings and races
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-507)

Differential Yoke including Seal and Pinion Nut

from

$48.99
A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.

Product Features:
  • Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles.
  • Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33300)

Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford

from

$11.99
Side gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:
  • Side gear thrust washer for Ford 8.8″
  • 0.875″ diameter cross pin shaft applications only
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Trao Loc Spring For Ford 8.8", 31 Spline (Part No.33516)

Trao Loc Spring For Ford 8.8", 31 Spline

from

$99.99
Product Features:
  • Trac Loc spring for Ford 8.8″
  • 31 spline applications only
See More

Dorman – Ford 8.8 Ring Gear with 31-splines and ABS Ring (Part No.630-413)

Ford 8.8 Ring Gear with 31-splines and ABS Ring

from

$193.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Yukon Gear – Mini Spool For Ford 8.8" With 28 Spline Axles (Part No.32225)

Mini Spool For Ford 8.8" With 28 Spline Axles

from

$218.99
Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″ with 28 spline axles
  • Provides 100% traction to both wheels at all times
  • Installs into standard open carrier case
See More

Motive Gear – Performance Differential Ring and Pinion (Part No.F888456)

Performance Differential Ring and Pinion

from

$230.99


Product Features:
  • FRD 10BLT 8.8 R/P 4.56 MGP
See More

Yukon Gear – Crush Sleeve Eliminator Kit For Ford 8.8" & 7.5" (Part No.55040)

Crush Sleeve Eliminator Kit For Ford 8.8" & 7.5"

from

$96.99
2 piece solid spacer for Ford 8.8 and 7.5.

Product Features:
  • Crush sleeve eliminator kit for Ford 7.5″ and 8.8″
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Ford Crown Victoria Drivetrains Categories

Helping You Find the Right Drivetrains for Your Ford Crown Victoria

You love your Crown Victoria. So we’ve made it easier than ever to help you find Ford Crown Victoria Drivetrains in our online catalog. Our inventory holds 292 aftermarket and OEM Drivetrains for your Ford Crown Victoria, ranging from $0.99 to $2,064.99.

We offer parts from 32 brands trusted to make quality Drivetrains for your Ford Crown Victoria. Before you buy, take some time to read through customer reviews. We currently have 90,065 reviews of Ford Crown Victoria Drivetrains from previous customers. Some of the top rated parts include Differential Cover Gasket with 4.6 stars and Universal Joint with 4.4 stars.

Find your Crown Victoria Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Crown Victoria part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Drivetrains Brands for Your Ford Crown Victoria

Our inventory holds Drivetrains for your Ford Crown Victoria from 32 trusted brands. You’ll find OEM and aftermarket parts from brands like Moog, Valvoline, and Driveworks, all of which can keep that Ford happy.
We have Powertrax parts available for your Ford Crown Victoria in categories like Differentials. Some of the top-rated Powertrax parts in these categories are:
Lock Right Locker
from $444.99
(1)
Lock Right Locker
Complete Differentials

Top-Rated Valvoline Drivetrains

Leading Valvoline Drivetrains

We carry Valvoline brand parts for your Ford Crown Victoria across several catalog categories, including Differentials. Some of our most reviewed Valvoline parts include:
Transfer Case Fluid, 1 Quart
from $14.99
(36)
Transfer Case Fluid, 1 Quart
Differential Oil

FAQs for Ford Crown Victoria Drivetrains

What are the most purchased Drivetrains for the Ford Crown Victoria?

Out of 292 Drivetrains for the Ford Crown Victoria, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $25.99
(143)
Greaseable Premium Universal Joint
U-Joints
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints

What are the top-rated Ford Crown Victoria Drivetrains?

Top-rated Drivetrains for your Ford Crown Victoria based on customer reviews/ratings are:
Differential Cover Gasket
from $14.99
(121)
Differential Cover Gasket
“Great”
Universal Joint
from $15.99
(65)
Universal Joint
“Good price and exact fit”