2004 Ford Crown Victoria Drivetrains
More 2004 Ford Crown Victoria Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2004 Ford Crown Victoria, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2004 Ford Crown Victoria Drivetrains
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Axle Repair Bearing (Part No.S-RP-5707)
from
$16.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Driveworks – Tapered Roller Bearing (Part No.S-M-802011)
Pro-King – Differential Cross Shaft (Part No.742G930)
from
$2.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
National – Shaft Repair Sleeve (Part No.99181)
from
$37.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Positraction Internals For 8.8" Ford With 28 Spline Axles (Part No.16015)
from
$336.99
Yukon positraction internals for 8.8″ Ford with 28 spline axles. This kit fits Yukon Gura Grip & Eaton positractions. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Ford 8.8″ with Yukon Dura Grip positraction with 28 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16042)
from
$41.99
Product Features:
See More
- Shim kit
- Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
Yukon Gear – 8.8" Ford Tracloc Clutch Set (Carbon), Both Sides, 2003-2010 Cobra Svt (Part No.16104)
from
$342.99
8.8″ Ford TracLoc clutch set (Carbon), both sides, 2003-2010 Cobra SVT.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Ford 8.8″ trac Loc positraction
- Carbon fiber clutches
Yukon Gear – Axle For 8.8" Ford, 34-3/8", 31 Spline, 03 & Up Crown Victoria, With O ABS (Part No.21522)
from
$284.99
Ford 8.8″ axle shaft, fits ’03 & up Crown Victoria without ABS. 31 spline, 34 3/8″ long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy front axles come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 2003-2011 Ford Crown Victoria
- 31 spline
- 30 3/8″ long
- 5 lug
- Does not fit ABS applications
Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)
from
$42.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.250″ O.D.
- 1.400″ I.D.
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)
Yukon Gear – Standard Open Cross Pin Shaft (.750") For Ford 8", 8.8", 9" And Model 20 (Part No.33332)
from
$16.99
Standard open cross pin shaft (.750″) for Ford 8″, 8.8″, 9″ and Model 20.
Product Features:
See More
Product Features:
- Cross pin shaft for Ford 8″, 8.8″ and 9″ and AMC Model 20
- Fits standard open differentials only
- 0.750″ diameter
Pro-King – Differential Ring Gear Bolt (Part No.761A935)
from
$0.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
USA Standard Gear – Pinion Installation Kit For ’09 & Down Ford 8.8 (Part No.60009)
from
$119.99
8.8″ FORD 09 & DWN PINION KIT .
Product Features:
See More
Product Features:
- Fits 2009 and down Ford 8.8″
- Uses Koyo bearings and races
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
Dorman – Prevailing Torque Spindle Nut M24-2.0 Hex Size 36mm (sold by each) (Part No.615-098)
from
$13.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Pro-King – Differential Internal Nest Kit (Part No.762B717A)
from
$99.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Cardone – Rear Drive Shaft: Greasable, Direct Replacement (Part No.65-2026)
from
$402.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Dorman – Differential Clutch Kit (Part No.697-780)
from
$262.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles
- Quality materials – all components are built for reliable longevity and performance
- Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
- Trustworthy quality – backed by team of designers and engineers in the United States
Yukon Gear – Standard Open Spider Gear Kit For 8.8" Ford With 31 Spline Axles (Part No.16021)
from
$299.99
Yukon standard open spider gear kit for 8.8″ Ford with 31 spline axles and 7/8″ pin. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Ford 8.8″ with 31 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
- 0.875″ cross pin shaft diameter
Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)
from
$6.99
Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.
Product Features:
See More
Product Features:
- 35 spline
- 8 x 3.96″ bolt pattern
- Cut to length design fits 40″-43.5″ applications
- Fits Dana Spicer 60, 70 and 80
Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)
from
$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Product Features:
See More
Product Features:
- Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Standard Open Carrier Case, Ford 8.8", 31 Spline (Part No.20077)
from
$269.99
8.8″ 31 spline standard Open case (7/8 X-PIN HOLE).
Product Features:
See More
Product Features:
- Standard open carrier case
- Fits Ford 8.8″ with 31 spline axles
- Does not include spider gears
- 0.875″ cross pin shaft diameter
Motive Gear – Differential Ring and Pinion (Part No.F8.8-373)
USA Standard Gear – Ring and Pinion Kit (Part No.36329)
from
$319.99
Ring and Pinion Kit
Motive Gear – Differential Gear Install Kit (Part No.F8.8IK)
Popular 2004 Ford Crown Victoria Drivetrains Categories
2004 Ford Crown Victoria Drivetrains
You count on your 2004 Ford Crown Victoria to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 239 Drivetrains ranging in price from $0.99 to $2,064.99, you’re sure to find everything you need for your 2004 Ford Crown Victoria.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 21 different brands like Valvoline, Moog, and Driveworks. 2004 Ford Crown Victoria Drivetrains start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 9,780 extensive product reviews on 2004 Ford Crown Victoria Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.4 stars and Oil Seal with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2004 Ford Crown Victoria below to get started!
Top-Rated Drivetrains Brands For Your 2004 Ford Crown Victoria
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Ford Crown Victoria running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2004 Ford Crown Victoria back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2004 Ford Crown Victoria Drivetrains
What are the most purchased Drivetrains for the 2004 Ford Crown Victoria?
Out of 239 Drivetrains for the 2004 Ford Crown Victoria, the most popular in our inventory are:
What are the top-rated 2004 Ford Crown Victoria Drivetrains?
Top-rated Drivetrains for your 2004 Ford Crown Victoria based on customer reviews/ratings are:
