Ford Courier Sedan Delivery Performance and Racing Products

Essential Ford Courier Sedan Delivery Performance and Racing Products

Edelbrock – Intake Manifold Gasket for 1985-1976 390-428 FE Fords (Part No.7224)

Intake Manifold Gasket for 1985-1976 390-428 FE Fords

from

$30.99
Product Features:
  • Clean Positive Seal
  • Embossed Silicone Bead Surrounding The Port
  • Matched To Manifolds And Cylinder Heads
See More

Edelbrock – Performer-Plus Camshaft Kit for Ford FE 352-428 V8 (Part No.2106)

Performer-Plus Camshaft Kit for Ford FE 352-428 V8

from

$392.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny

from

$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
See More

Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

Mallory Kit: Unil Conv: Delco: V8

from

$149.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7229)

Exhaust Manifold Gasket Set for Ford

from

$33.99
Product Features:
  • 0.0625 in. Thickness
  • 1.40 in. x 2.04 in. Port Size
  • For 390-428 FE Ford V8
  • Gray Color
  • Two Piece Configuration
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$33.99


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

Super Stock Replacement Coil for Improved Performance, Starting, and Power

from

$45.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:
  • 42000 Volts
  • Effective To 6500 RPM
  • Quicker Starting
  • Improved Throttle Response
  • Higher RPM Power
  • Can Finished In Yellow
See More

Accel – Supercoil (Part No.140001)

Supercoil

from

$114.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:
  • Oil Filled For Better Cooling
  • Optimized Low Resistance
  • Silicon Magnetic Steel E-Core
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1817)

PERFORMANCE OIL PAN GASKET SET

from

$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Mallory – Malry Unilite Dist.: 49-53 Flathead Ford (Part No.3727501)

Malry Unilite Dist.: 49-53 Flathead Ford

from

$549.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

MSD Ignition – Distributor; Ford Y Block; Ready-to-Run (Part No.8383)

Distributor; Ford Y Block; Ready-to-Run

from

$849.99
MSD is excited to offer two ready-to-run distributors for two classic Ford engines. These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 amps is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the ready-to-run distributors is their simple installation. All you need to do is connect three wires and you’ll be cruising.

Product Features:
  • Now includes built-in Rev Limiter
  • No CARB Exemption Order Number
  • Does not require an MSD Ignition Control
  • Built-in module produces a 7.5 amp single spark through high rpm
  • Vacuum advance canister for improved economy (can be locked out)
  • CNC machined billet aluminum housing and billet aluminum base
  • Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
See More

Mallory – Mallory Unilite Dist.: 332-428 Fe Ford (Part No.3755301)

Mallory Unilite Dist.: 332-428 Fe Ford

from

$599.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)

Thermocap Radiator Cap

from

$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Mr. Gasket – Valve Cover (Part No.9412)

Valve Cover

from

$99.99
These Mr. Gasket chrome plated stamped steel valve covers have a flat smooth top, and internal baffles. Fits Ford 332,360,390,406,427,428. Sold as a pair.

Product Features:
  • Fits Ford big block (FE series)
  • Chrome plated steel construction
  • Sold as a pair
  • Long Lasting Durability
  • Cadmium Plated To Resist Corrosion
  • Easy Installation
See More

Edelbrock – Classic Series Valve Covers: Ford FE V8 1958-76, Polished Aluminum, Set Of 2 (Part No.4162)

Classic Series Valve Covers: Ford FE V8 1958-76, Polished Aluminum, Set Of 2

from

$465.99
The Edelbrock #4162 Classic Series Valve Covers are designed for Ford FE V8 1958-1976 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. They are made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

Product Features:
  • Ford FE V8 1958-76
  • Tall
  • Polished Aluminum
  • Set Of Two
See More

Accel – Contact And Condenser Kit (Part No.8203)

Contact And Condenser Kit

from

$86.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.

Product Features:
  • High Performance Points and Condenser
  • With Integral Conductor
See More

Edelbrock – Flathead Ford Cylinder Head With Script Logo (Part No.1115)

Flathead Ford Cylinder Head With Script Logo

from

$901.99
Product Features:
  • Made of A356 aluminum T-6 tempered cylinder head
  • Cylinder head is made of aluminum with a natural finish
  • Large water capacity and excellent breathing characteristics
  • Compression ratio increase is approximately 3/10 of a percent with each 1/8 in. stroke
  • Compression ratio is 8.0:1 on blocks with a 3/16 in. base relief
See More

Edelbrock – Flathead Ford Cylinder Head With Script Logo (Part No.1116)

Flathead Ford Cylinder Head With Script Logo

from

$955.99
The Edelbrock #1116 Ford Flatheads feature the original Edelbrock script logo design for Fords and Mercurys, and are casted at the Edelbrock Foundry in the USA of T-6 tempered A356 aluminum. The Edelbrock #1116 heads are rugged, ribbed internally and exte

Product Features:
  • 24 Stud
  • High Lift/Large Chamber
  • 74cc Combustion Chamber Volume
  • 0.500 in. Valve Chamber Depth Machined
  • Satin Finish
See More

Helping You Find the Right Performance and Racing Products for Your Ford Courier Sedan Delivery

You love your Courier Sedan Delivery. So we’ve made it easier than ever to help you find Ford Courier Sedan Delivery Performance and Racing Products in our online catalog. Our inventory holds 29 aftermarket and OEM Performance and Racing Products for your Ford Courier Sedan Delivery, ranging from $13.99 to $955.99.

We offer parts from 8 brands trusted to make quality Performance and Racing Products for your Ford Courier Sedan Delivery. Before you buy, take some time to read through customer reviews. We currently have 1,023 reviews of Ford Courier Sedan Delivery Performance and Racing Products from previous customers. Some of the top rated parts include Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) with 3.8 stars and Performer-Plus Camshaft Kit for Ford FE 352-428 V8 with 4.0 stars.

Find your Courier Sedan Delivery Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Courier Sedan Delivery part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Performance and Racing Products Brands for Your Ford Courier Sedan Delivery

Our inventory holds Performance and Racing Products for your Ford Courier Sedan Delivery from 8 trusted brands. You’ll find OEM and aftermarket parts from brands like Accel, Holley, and FEL-PRO Performance, all of which can keep that Ford happy.
We have Mallory parts available for your Ford Courier Sedan Delivery in categories like Performance Ignition Products. Some of the top-rated Mallory parts in these categories are:
Mallory Kit: Unil Conv: Delco: V8
from $149.99
(1)
Mallory Kit: Unil Conv: Delco: V8
Performance Ignition Kits
Unilite Ignition Module
from $92.99
(3)
Unilite Ignition Module
Performance Ignition Parts

Top-Rated Accel Performance and Racing Products

Leading Accel Performance and Racing Products

We carry Accel brand parts for your Ford Courier Sedan Delivery across several catalog categories, including Performance Ignition Products. Some of our most reviewed Accel parts include:
Super Stock Coil Chrome
from $51.99
(9)
Super Stock Coil Chrome
Performance Coils
Contact And Condenser Kit
from $86.99
(1)
Contact And Condenser Kit
Performance Points and Condensers

FAQs for Ford Courier Sedan Delivery Performance and Racing Products

What are the most purchased Performance and Racing Products for the Ford Courier Sedan Delivery?

Out of 29 Performance and Racing Products for the Ford Courier Sedan Delivery, the most popular in our inventory are:
PERFORMANCE OIL PAN GASKET SET
from $29.99
This product is not rated
PERFORMANCE OIL PAN GASKET SET
Performance Engine Oil Pan Gaskets

What are the top-rated Ford Courier Sedan Delivery Performance and Racing Products?

Top-rated Performance and Racing Products for your Ford Courier Sedan Delivery based on customer reviews/ratings are:
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
from $414.99
(5)
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
“easy to install all the gaskets and parts came with it”
Performer-Plus Camshaft Kit for Ford FE 352-428 V8
from $392.99
(1)
Performer-Plus Camshaft Kit for Ford FE 352-428 V8
“1964 Ford Galaxie 500 352ci FE Big Block. Edelbrock says to use the Performer-Plus Camshaft part #2106 to increase performance, but Advanced Auto(you)”