Ford B800F Parts
Top Ford B800F Parts Categories
Ford B800F Suspension Parts
Monroe – Magnum Shock Absorber (Part No.65103)
from
$111.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
- 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
- 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
- Single-lip, low-friction oil seal
Bulldog HD – Heavy-Duty Shock Absorber – 2001-2010 Freightliner Classic (Part No.HD1215-0029)
from
$73.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.
Product Features:
See More
Product Features:
- Robotic 360 Degree Welds; Highest Weld Strength in the Industry
- Propriety Value Design for long lasting compression and rebound performance
- Brushing rubber formulation with lowest levels of filler
- OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
- Double lip seal design to reduce excessive misting and extend damping life cycle
Monroe – Magnum Shock Absorber (Part No.65102)
from
$117.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
- 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
- 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
- Single-lip, low-friction oil seal
Monroe – Magnum Shock Absorber (Part No.65482)
from
$128.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
- 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
- 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
- Single-lip, low-friction oil seal
Bulldog HD – Heavy-Duty Shock Absorber – 1996-1998 Ford AT9513 (Part No.HD1215-0036)
from
$75.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.
Product Features:
See More
Product Features:
- Robotic 360 Degree Welds; Highest Weld Strength in the Industry
- Propriety Value Design for long lasting compression and rebound performance
- Brushing rubber formulation with lowest levels of filler
- OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
- Double lip seal design to reduce excessive misting and extend damping life cycle
Bulldog HD – Heavy-Duty Shock Absorber – 1994-1994 Ford B700 (Part No.HD1215-0068)
from
$84.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.
Product Features:
See More
Product Features:
- Robotic 360 Degree Welds; Highest Weld Strength in the Industry
- Propriety Value Design for long lasting compression and rebound performance
- Brushing rubber formulation with lowest levels of filler
- OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
- Double lip seal design to reduce excessive misting and extend damping life cycle
Ford B800F Cooling and Climate Controls
Factory Air – Cap and Valve A/C System Seal Kit (Part No.26781)
from
$24.99
Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific
See More
Factory Air – Cap and Valve A/C System Seal Kit (Part No.26779)
from
$19.99
Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific
See More
Factory Air – Cap and Valve A/C System Seal Kit (Part No.26780)
from
$25.99
Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific
See More
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)
from
$17.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Fram – Coolant Spin-on Filter (Part No.PR3908)
from
$16.99
Coolant Spin-on Filter
Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)
from
$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Ford B800F Filters and PCVs
Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.86472)
from
$30.49
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Contains Standpipe
- Patent pending drain, metal end caps, which hold media in place
- Rust resistant can, ensuring no leakage from inside
- Made in USA
- Includes Standpipe
- CAUTION: Furnished O-Ring must be installed on post for seal.
Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.86357)
from
$25.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Application engineered media which aids in stripping water in diesel fuels
- Patent pending drain, metal end caps, which hold media in place
- Rust resistant can, ensuring no leakage from inside
- Made in USA
- CAUTION: Furnished O-Ring must be installed on post for seal.
Carquest Premium – Secondary Fuel Spin-on Filter for Modern Engines (Part No.86777)
from
$22.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Contains Standpipe
- Includes Standpipe
- CAUTION: Furnished O-Ring must be installed on post for seal.
Fram – HD Fuel, Secondary Spin-on (Part No.P8043)
from
$16.49
This high-volume accessory is designed to promote efficient fuel injection performance. FRAM® offers exceptional domestic and import fuel filter coverage to meet the needs of virtually all engine configurations.
Product Features:
See More
Product Features:
- Designed for use in modern fuel injection systems and with oxygenated fuels
Carquest Premium – Full-Flow Lube Spin-on (Part No.85607)
from
$17.29
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
- 84620 may be used in place of 85607. Do NOT substitute 85607 for 84620.
FRAM Drive – Spin-on Oil Filter: Ideal for Conventional Oil, Protection up to 7,500 miles (Part No.FD3976A)
from
$9.99
FRAM Drive is the perfect oil filter for everyday driver. Designed with OE grade synthetic blend media and compatible with both conventional and synthetic oil types, FRAM Drive keeps engine protected for up to 7,500 miles (12,000 kilometers). FRAM Drive is engineered to withstand high temperatures and endure working pressures common in todays engines.
Product Features:
See More
Product Features:
- Proven protection for up to 7,500 miles
- Engineered for use with synthetic or conventional motor oil
- Precision Relief Valve provides consistent oil flow, even in cold conditions
- Designed for everyday drivers who perform oil changes at OE (original equipment) recommended intervals
Carquest Standard – Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles (Part No.R84620)
from
$7.99
Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.
Product Features:
See More
Product Features:
- Protection for up to 5,000 miles
- Cellulose media provides 95.1% efficiency at 20 Microns for increased engine protection
- Nitrile anti-drain back valve for engine start-up protection
- Lathe cut nitrile sealing gasket prevents leaks
- Double fluted spiral wound center tube allows maximum flow and provides additional strength
- Solid steel baseplate provides additional strength to resist leakage
- Meets requirements for maintaining new vehicle warranties
Fram – HD Full-Flow Lube Spin-on (Part No.PH3976A)
from
$4.99
FRAM Extra Guard® oil filters deliver proven, advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended service intervals. Extra Guard oil filters are engineered for conventional and synthetic motor oil, offering engine protection for up to 10,000 miles (when used with applicable synthetic oil).
Product Features:
See More
Product Features:
- Proven protection for up to 10,000 miles
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
Search Over 35 Ford B800F Parts Online for Delivery or Pick Up
Looking for the best Ford B800F aftermarket replacement parts? Replacing worn and broken parts on your Ford B800F? Check out our online catalog to find the best selection of aftermarket Ford B800F parts as well as real user reviews on Ford B800F replacement parts. Make an informed decision about every component you add to your B800F.
At Advance Auto, we’ve got you covered when it comes to getting your Ford B800F in tip top condition. We’ve got over 35 Ford B800F parts to choose from in popular categories like Interior Products, Steering and Chassis Parts and Suspension Parts. If you’re looking for the best prices, try searching our Ford B800F parts catalog to compare OEM and aftermarket parts for your Ford B800F.
Whether you need Ford B800F body parts, interior components, or custom Ford B800F parts you can find them online at Advance Auto. Want to order your Cooling and Climate Controls online? Or maybe you need your Ford Filters and PCVs same day? No problem, you can pick up B800F parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Ford B800F parts has never been easier.
Popular Types of Parts for Ford B800F
Advance Auto customers frequently search for the following types of Ford B800F auto parts. Check out customer reviews and ratings, and compare prices on the following Ford B800F parts:
Find Parts for Your Ford B800F by Year
People also search Advance Auto for these popular years of the Ford B800F:
