Dodge Monaco Performance and Racing Products

Essential Dodge Monaco Performance and Racing Products

Edelbrock – Performer Carb/Plate Nitrous Systems for Spread-Bore (Q-Jet)Carbs (50-75-100 Hp) (Part No.70002)

Performer Carb/Plate Nitrous Systems for Spread-Bore (Q-Jet)Carbs (50-75-100 Hp)

from

$684.99


Product Features:
  • Designed For Carbureted V6 And V8 Engines
  • Use With Single Or Dual Plane Manifolds
  • Power Increases From 50 to 100 HP
  • Plate Systems are Easy to Install
  • Precision EDM Machined Spray Bars Maximize Flow
  • Option of Silver Powder Coated or Polished Bottle
  • Recommend Ignition Retard ; Upgraded Fuel System
  • Requires Use of Premium Fuel
See More

Spectre – Water Neck; Chrysler (Part No.4739)

Water Neck; Chrysler

from

$23.79
Spectre’s Chrysler water neck fits 1964 and later Chrysler V8 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes bolts.

Product Features:
  • Fits 1964 and later Chrysler V8 engines
  • Includes bolts
  • Chrome plated
  • Easy to install
  • O-ring/gasket not included
See More

B & M – Flexplate, TF 727 360 CID (Part No.10236)

Flexplate, TF 727 360 CID

from

$154.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1971-92 Chrysler, Dodge and Plymouth (externally balanced) 360ci V8 engine (6-bolt crankshaft flange) and A727 transmission. Features include high tensile strength steel construction to resist elongation and cracking, 10.00 and 11.125 inch bolt patterns and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

Energy Suspension – Torsion Bar Crossmember Mount Bushing Set (Part No.5.4110R)

Torsion Bar Crossmember Mount Bushing Set

from

$40.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Edelbrock – Big-Block Chrysler E-Street Cylinder Heads 84cc (Part No.5093)

Big-Block Chrysler E-Street Cylinder Heads 84cc

from

$2198.99
The Edelbrock #5093 E-Street cylinder heads are designed for use with 1961-1979 Chrysler 361-440 c.i.d. Wedge engine applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads featur

Product Features:
  • Complete Pair For Hydraulic Flat Tappet
  • 84cc Combustion Chamber Volume
  • 210cc Intake/70cc Exhaust Runner Volume
  • 2.14 in. Intake/1.81 in. Exhaust Valve Diameter
  • 0.625 in. Deck Thickness
See More

Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)

Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79

from

$141.99
Product Features:
  • Non-Rotator Type
  • 1.550 in. Outer Diameter
  • .190 Wire Size
  • Single Coil Spring Type
  • Set of 16
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 6 Piece Set (Part No.1213)

Lower Intake Manifold Gasket Set: 6 Piece Set

from

$38.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Spectre – Oil Pan (Part No.5479)

Oil Pan

from

$165.99
This Spectre Oil Pan was designed for the big block Chrysler/Dodge/Plymouth 383, 400, 413, 426, & 440 engines. This triple chrome plated oil pan is made to replace the oem oil pan.

Product Features:
  • Triple chrome-plated
  • Steel construction
  • Stock capacity
  • Made from high quality material
See More

B & M – Automatic Shifter, Hammer Shifter, Universal (Part No.80885)

Automatic Shifter, Hammer Shifter, Universal

from

$339.99
The Hammer shifter may just be the most comfortable and versatile shifter available. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is s

Product Features:
  • Ratchet Action Shifter
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
  • Reverse Lockout Feature
See More

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1350-8759)

Drive Shaft Pinion Yoke

from

$254.99


Product Features:
  • BILLET HP 1350-29 SPLINE YOKE
See More

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1608)

PERFORMANCE VALVE COVER GASKET SET

from

$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

B & M – Transkit, 70-79 TF 727 (Part No.10229)

Transkit, 70-79 TF 727

from

$467.99
The B&M Transkit includes the same quality components used in a B&M street strip transmission, in a do it yourself kit. Our Transpak is included giving improved shift feel, while still retaining full automatic function.

Product Features:
  • High Perf. Friction Materials
  • Complete Overhaul Gasket Set
  • Modification Components
  • Replacement Valves
  • Replacement Springs
See More

Hays – Comp/Trk Clutch Kit-1O.5 Chry (Part No.85-301)

Comp/Trk Clutch Kit-1O.5 Chry

from

$601.99
High burst strength woven lining to withstand heat and higher engine RPM. Heavy-duty sprung hub assembly to allow smooth engagement and steady torque transfer without chatter. Recommended for high horsepower street vehicles in addition to occasional drag strip use.

Product Features:
  • Built As Matched Assembly
  • Exceptional Performance
  • Exceptional Durability
  • Long Term Dependability
See More

Energy Suspension – Motor Mount (Part No.5.1106R)

Motor Mount

from

$52.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:
  • Gains Both Performance and Longevity
  • Will Handle Any and All Torque
  • Out Lasts Rubber
See More

Mr. Gasket – Dust Cap (Part No.2485)

Dust Cap

from

$12.09
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.

Product Features:
  • Chrome Plated Steel
  • Set of 2 Caps
  • Easy Installation
  • 2 Per Set
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Mr. Gasket – Rear Main Seal Gasket (Part No.1968)

Rear Main Seal Gasket

from

$42.99
This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

Product Features:
  • Repairs That Leaky Rear Main Sail
  • Silicone Rubber to Withstand Extreme Engine Oil Temperatures
  • Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
  • Injection Molded for Precise Fit
See More

Edelbrock – CARBURETOR (Part No.14064)

CARBURETOR

from

$541.99
Product Features:
  • EnduraShine Finish
  • GM/AMC-Style Throttle Linkage
  • Electric Choke Installed from Factory
  • Easy Tuning with 2-Piece Design
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

B & M – Torque Converter, Holeshot 3000 (Part No.10425)

Torque Converter, Holeshot 3000

from

$879.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some Holeshots.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

Edelbrock – Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish (Part No.21763)

Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish

from

$521.99
Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8’s. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black po

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 4.13 in. Front Height, 4.63 in. Center Height, 5.13 in. Rear Height
  • Black Powder Coated Finish
  • Non-EGR
See More

Powertrax – No-Slip Traction System (Part No.9203822705)

No-Slip Traction System

from

$527.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    B & M – Shift Improver Kit (Part No.10225)

    Shift Improver Kit

    from

    $72.99
    This B&M Shift Improver kit fits all 1971-1977 Chrysler, Dodge and Plymouth TF727 transmissions with 6 cyl and V8 engines, along with A-904 transmissions with V-8 engines. This kit recalibrates your automatic transmission for optimum performance, extended life by eliminating shift overlap and excess wear on clutches & bands due to slippage. You get two modes of performance to select from: Stage 1 Heavy Duty, or Stage 2 Street/Strip. Stage 1 gives firm positive shifts without loss of driver comfort for improved shifting performance in all street vehicles. Street/Strip is for high performance street use or for competitive events for the enthusiast who wants the hardest hitting, quickest possible shifts. All you need are basic tools, the included installation instructions and in the space of an afternoon you can turn your transmission into a B&M-tuned unit! Ask the thousands of satisfied customers that have installed one in their transmissions!

    Product Features:
    • Eliminates Shift Overlap
    • Provides Crisp Shifts
    • On Any Stock Automatic Transmission
    • Eliminates Soft/Sluggish Shift
    • Eliminate Clutch and Band Wear
    • Improves Transmission Life
    • Transmission Removal Not Required
    See More

    Energy Suspension – Control Arm Bushing Set (Part No.5.3121R)

    Control Arm Bushing Set

    from

    $44.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More

    Accel – Ignition/Electrical (Part No.8321)

    Ignition/Electrical

    from

    $717.99


    Product Features:
    • Heavy Duty Cap and Rotor Kit
    • With Brass Inserts
    See More

    Mr. Gasket – High Performance Thermostat (Part No.4367)

    High Performance Thermostat

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens at 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Dodge Monaco Performance and Racing Products Categories

    Helping You Find the Right Performance and Racing Products for Your Dodge Monaco

    You love your Monaco. So we’ve made it easier than ever to help you find Dodge Monaco Performance and Racing Products in our online catalog. Our inventory holds 159 aftermarket and OEM Performance and Racing Products for your Dodge Monaco, ranging from $9.99 to $2,198.99.

    We offer parts from 21 brands trusted to make quality Performance and Racing Products for your Dodge Monaco. Before you buy, take some time to read through customer reviews. We currently have 32,951 reviews of Dodge Monaco Performance and Racing Products from previous customers. Some of the top rated parts include Blaster 2 Coil: High Performance Ignition Upgrade with 4.3 stars and Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet with 4.7 stars.

    Find your Monaco Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge Monaco part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

    Top Performance and Racing Products Brands for Your Dodge Monaco

    Our inventory holds Performance and Racing Products for your Dodge Monaco from 21 trusted brands. You’ll find OEM and aftermarket parts from brands like K&N, Accel, and Mr. Gasket, all of which can keep that Dodge happy.
    We have Competition Cams parts available for your Dodge Monaco in categories like Performance Engines. Some of the top-rated Competition Cams parts in these categories are:
    Engine Valve Spring Kit
    from $759.99
    (1)
    Engine Valve Spring Kit
    Performance Engine Valve Springs

    Top-Rated K&N Performance and Racing Products

    Leading K&N Performance and Racing Products

    We carry K&N brand parts for your Dodge Monaco across several catalog categories, including Performance Oil Filters and Performance Air Filters. Some of our most reviewed K&N parts include:

    FAQs for Dodge Monaco Performance and Racing Products

    What are the most purchased Performance and Racing Products for the Dodge Monaco?

    Out of 159 Performance and Racing Products for the Dodge Monaco, the most popular in our inventory are:
    High Performance 180 Degree Thermostat for Increased Flow
    from $26.99
    (20)
    High Performance 180 Degree Thermostat for Increased Flow
    Performance Engine Coolant Thermostats

    What are the top-rated Dodge Monaco Performance and Racing Products?

    Top-rated Performance and Racing Products for your Dodge Monaco based on customer reviews/ratings are:
    Blaster 2 Coil: High Performance Ignition Upgrade
    from $49.99
    (20)
    Blaster 2 Coil: High Performance Ignition Upgrade
    “Had one before and blew it up, good easy replacement. MSD makes a good product.”
    Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
    from $394.99
    (10)
    Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
    “i have delt with every auto parts dealer there is and advance allways treats me like im their only custemer, thanks guys and gals!!!”
    Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
    from $451.99
    (7)
    Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
    “Easy install, had it installed in less then 30 mins on my 70 camaro 350 after my holley failed. It started right up only adjustment i had to do was tu”