Dodge Magnum Steering and Chassis Parts
Top Dodge Magnum Steering and Chassis Parts Categories
We carry over 246 Steering and Chassis Parts in inventory for the Dodge Magnum. If you’re looking for aftermarket Steering and Chassis Parts for your Dodge Magnum, check out all these categories:
Essential Dodge Magnum Steering and Chassis Parts
Lares – Remanufactured Power Steering Gear Box (Part No.1031)
from
$625.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Cardone New – New Power Steering Reservoir (Part No.3R-701)
from
$62.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.
Product Features:
See More
Product Features:
- 100% testing ensures leak-free performance.
- Designed to match O.E. fit, function and performance.
- Manufactured from O.E. grade material for strength and durability.
- Resistant to cracking caused by the high temperatures in the engine compartment.
- Reservoirs with integrated filter have the same filtration efficiency as O.E.
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8553)
from
$51.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Drive Shaft Seal Kit (Part No.8708)
from
$15.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Complete Rebuild Kit (Part No.8538)
from
$157.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Control Valve Seal Kit (Part No.8518)
from
$16.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Dorman – Lower Steering Shaft (Part No.425-270)
from
$164.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision.
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.37372)
from
$56.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Dorman – Help – Power Steering Reservoir Cap: Screw On, Dipstick Included, 1 Pack (Part No.82746)
from
$18.49
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap.
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-379)
from
$302.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.
Product Features:
See More
Product Features:
- Protective coating applied to each unit to extend the life of the unit (where applicable).
- 100% performance testing to ensure perfect fit, function and reliable performance.
- 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
- 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
- Valve housings have polished micro-finish sleeves for durability (where applicable).
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Whiteline – Subframe Mount Bushing (Part No.W93343)
from
$306.99
The Whiteline kit replaces the bushings in the rear subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering. Recommended for motorsport applications.
Product Features:
See More
Product Features:
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Autopart International Inc – Control Arm (Part No.L20002562708API)
from
$84.82
Control Arm
MOOG – Ball Joint (Part No.K80996)
from
$54.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
National – Multi Purpose Seal (Part No.6859S)
from
$12.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Energy Suspension – Torsion Bar Crossmember Mount Bushing Set (Part No.5.4110G)
Dorman – Help – Power Steering Reservoir Cap (Part No.82746CD)
from
$20.29
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap.
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
Energy Suspension – Ball Joint Dust Boot Set (Part No.5.13102R)
from
$10.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Lasts Longer
- Looks Great
Driveworks – Control Arm (Part No.521-122)
from
$89.99
Rigorously tested by a team of product and quality engineers, our Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride.
Product Features:
See More
Product Features:
- Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
Energy Suspension – SwyBarBshKt (Part No.5.5171G)
from
$23.99
SwyBarBshKt
Powercraft – Rack Pinion Seal Kit (Part No.9188)
from
$154.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Taper Bearing Cup (Part No.S-M-86610)
from
$4.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
MOOG – Camber Adjusting Bushing (Part No.K100173)
from
$98.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Pitman Arm (Part No.K7076)
from
$90.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Heavy duty design
- Engineered steel composition results in a stronger component
- Loose or worn chassis parts can lead to premature tire wear
- Exclusive cover plate protects against contaminants leaking into the bearing surface
- Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Dodge Magnum Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Dodge Magnum
You love your Magnum. So we’ve made it easier than ever to help you find Dodge Magnum Steering and Chassis Parts in our online catalog. Our inventory holds 246 aftermarket and OEM Steering and Chassis Parts for your Dodge Magnum, ranging from $2.99 to $729.99.
We offer parts from 24 brands trusted to make quality Steering and Chassis Parts for your Dodge Magnum. Before you buy, take some time to read through customer reviews. We currently have 12,881 reviews of Dodge Magnum Steering and Chassis Parts from previous customers. Some of the top rated parts include Power Steering Oil Cooler with 3.7 stars and New Power Steering Filter with 3.8 stars.
Find your Magnum Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge Magnum part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Dodge Magnum
Our inventory holds Steering and Chassis Parts for your Dodge Magnum from 24 trusted brands. You’ll find OEM and aftermarket parts from brands like Driveworks, Imperial, and Carquest Premium, all of which can keep that Dodge happy.
We have Dorman parts available for your Dodge Magnum in categories like Power Steering Parts and Steering Shafts. Some of the top-rated Dorman parts in these categories are:
Top-Rated Driveworks Steering and Chassis Parts
Leading Driveworks Steering and Chassis Parts
We carry Driveworks brand parts for your Dodge Magnum across several catalog categories, including Steering Shafts and Tie Rods. Some of our most reviewed Driveworks parts include:
FAQs for Dodge Magnum Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Dodge Magnum?
Out of 246 Steering and Chassis Parts for the Dodge Magnum, the most popular in our inventory are:
from
$7.79
This product is not rated
3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
What are the top-rated Dodge Magnum Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Dodge Magnum based on customer reviews/ratings are:
