Dodge Caliber Ignition and Tune-Up Products

Essential Dodge Caliber Ignition and Tune-Up Products

Carquest Premium – Ignition Capacitor (Part No.GAA1127)

Ignition Capacitor

from

$18.99
An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.

Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA2995)

Multi-Use Connector

from

$79.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
See More

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0232)

Ignition Knock (Detonation) Sensor

from

$24.99
The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock or detonation to alter the ignition timing and prevent detonation. A piezoelectric crystal generates a varying voltage based upon engine vibration intensity to delay ignition timing to help prevent severe and costly engine damage. Reasons for replacement include check engine light illumination, engine hesitation, poor fuel economy or failed emissions test.

Product Features:
  • ADVANCED TECHNOLOGY: Manufactured to operation performance standards to meet or exceed OE fit, form, and function to ensure proper ignition timing.
  • INSTALLATION AND SUPPORT: Mounting threads, harness length and wire gauge match OE for easy, worry free installation.
  • THE DIFFERENCE: Reinforced components are used to reduce the chance of part failure and prevent corrosion and moisture penetration. Shielded harness prevents electrical interference.
See More

Delphi – Knock Sensor (Part No.AS10167)

Knock Sensor

from

$23.29
Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3669)

Ignition Knock (Detonation) Sensor

from

$24.99
Carquest Premium knock sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium knock sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We utilize advanced technology to design sensors that are, in many cases, stronger than OE parts. Carquest Premium knock sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium knock sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Trivalent iridescent chromate plating prevents corrosion
  • Silicone seals prevent moisture intrusion preventing false codes and sensor failure
  • Wiring harnesses utilize high-temperature insulation when applicable
  • Extensive design validation testing and 100% end-of-line tested
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Dorman – Ignition Switch Kit (Part No.924-727)

Ignition Switch Kit

from

$53.99
This replacement ignition switch is a direct replacement for a damaged or worn-out original equipment switch Made of quality materials for durability, this part has been tested to ensure a proper fit.

Product Features:
  • Ideal replacement – this ignition switch matches the fit and function of the original equipment switch to restore proper operation to the ignition circuit
  • Durable construction – this ignition switch is made of quality materials to ensure reliable performance and a long service life
  • Cost-effective solution – offers original equipment performance at competitive price
  • Quality tested – this part has undergone try-on testing to ensure a quality fit
See More

Carquest Premium – Ignition Switch (Part No.CSC1097)

Ignition Switch

from

$48.49
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest – Ignition Switch (Part No.CS861)

Ignition Switch

from

$46.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Spark Plug Boot Set: 4 Boots, Meets or Exceeds OE Specifications (Part No.38-013CMP)

Spark Plug Boot Set: 4 Boots, Meets or Exceeds OE Specifications

from

$23.99
Carquest Premium spark plug boot sets are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boot sets are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair. Carquest Premium spark plug boot sets include all boots needed for each vehicle application for a complete tune-up repair.

Product Features:


    Product Features:
    • Complete set of boots for a complete tune-up and better value
    • OE design provides an exact fit for your application
    • Provides excellent heat resistance as well as maximum protection against spark loss
    • Durable silicone compound for resistance to high heat or abrasion
    • Spring included with the coil boot
    • Design for direct compatibility
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7015)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$6.99
Carquest Premium spark plug boots are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boots are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair.

Product Features:


    Product Features:
    • OE design provides an exact fit for your application
    • Provides excellent heat resistance as well as maximum protection against spark loss
    • Durable silicone compound for resistance to high heat or abrasion
    • Spring included with the spark plug boot
    • Design for direct compatibility
    • Multipack provides one time replace all COP for better deal
See More

NGK – G-Power Spark Plug (ZFR5FGP): Enhanced Durability & Fuel Efficiency (Part No.7098)

G-Power Spark Plug (ZFR5FGP): Enhanced Durability & Fuel Efficiency

from

$8.49
NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:
  • SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
  • PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
  • TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
See More

Champion – Platinum Power Spark Plug (RC12PMC4): Powerful Performance & Durability (Part No.3318)

Platinum Power Spark Plug (RC12PMC4): Powerful Performance & Durability

from

$5.29
Champion Platinum Power spark plugs are engineered for premium performance and durability, making them an excellent choice for maintaining your vehicle’s peak efficiency. Featuring a platinum-tipped center electrode, these spark plugs ensure long-lasting reliability and resist wear, maintaining the proper gap specification throughout their lifespan. The fine-wire center electrode enhances ignitability, while the V-trimmed ground electrode sharpens spark focus for improved combustion. Constructed with an exclusive Heat-Active alloy, these plugs quickly reach and maintain optimal operating temperatures, ensuring consistent performance under various driving conditions. Designed with a flat seat type and integrated resistor, they deliver smooth operation and compatibility with a wide range of vehicles. Upgrade to Champion Platinum Power spark plugs for a blend of cutting-edge technology and dependable performance.

Product Features:
  • Platinum Power- Premium Spark Plug. Powerful Performance.
  • Platinum center electrode for long life
  • Fine-wire center electrode for greater ignitability
  • V-trimmed ground electrode promotes sharper spark focus
  • Heat-Active alloy allows electrodes to reach optimal temperature
  • Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
See More

Champion – Iridium Spark Plug (RC12WMPB4): Maximum Performance & Longevity (Part No.9202)

Iridium Spark Plug (RC12WMPB4): Maximum Performance & Longevity

from

$8.49
The Champion Iridium Spark Plug is engineered for maximum performance and durability, making it a top choice for automotive enthusiasts. Featuring a fine-wire iridium center electrode and a platinum-enhanced ground electrode, this premium spark plug ensures sharper spark focus and greater ignitability for optimal engine efficiency. Its V-trimmed ground electrode design promotes consistent performance, while the Heat-Active alloy allows the electrodes to quickly reach and maintain stable operating temperatures under all engine loads. Built with a flat seat type and resistor functionality, this performance-grade spark plug is designed to deliver long-lasting reliability and enhanced ignition precision. Whether you’re looking to boost your vehicle’s performance or maintain its peak condition, this spark plug offers exceptional value and longevity.

Product Features:
  • Champion Iridium – Maximum Performance. Premium Spark Plug
  • Iridium center electrode delivers maximum life
  • Fine-wire center electrode and V-trimmed for greater ignitability
  • V-trimmed ground electrode promotes sharper spark focus
  • Maintains stable operating temperature under all engine loads
  • Heat-Active alloy allows electrodes to reach optimal temperature quickly
See More

NGK – Iridium IX Spark Plug: Outstanding Acceleration & High Durability (Part No.2477)

Iridium IX Spark Plug: Outstanding Acceleration & High Durability

from

$14.99
NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:
  • SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
  • Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhance fuel efficiency, making them ideal for performance enthusiasts.
  • Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.
  • Gasket Seat Type for Secure Fit: The NGK Iridium IX spark plugs feature a gasket seat type, ensuring a secure and reliable fit in your engine.
See More

NGK – Ruthenium HX Spark Plug (FR5AHX): High Ignitability & Durability (Part No.95839)

Ruthenium HX Spark Plug (FR5AHX): High Ignitability & Durability

from

$16.99
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug, Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.

Product Features:
  • HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
  • RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
  • PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
See More

Driveworks – Coil on Plug Coil (Part No.26417)

Coil on Plug Coil

from

$41.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1011)

Ignition Coil: Meets OE Specifications, 1 Count

from

$44.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

DENSO – Direct Ignition Coil (Part No.673-5301)

Direct Ignition Coil

from

$28.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
See More

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count (Part No.EBC1005-4)

Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count

from

$145.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Delphi – Ignition Coil (Part No.GN10346)

Ignition Coil

from

$45.49
Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

DENSO – Coil On Plug Boots-4 (Part No.671-4285)

Coil On Plug Boots-4

from

$41.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:
  • OE design ensures a tight boot seal that protects against moisture intrusion
  • High temperature resistant material provides greater protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
  • Engineered to the specifications used by the original vehicle manufacturer for an exact fit
See More

Helping You Find the Right Ignition and Tune-Up Products for Your Dodge Caliber

You love your Caliber. So we’ve made it easier than ever to help you find Dodge Caliber Ignition and Tune-Up Products in our online catalog. Our inventory holds 48 aftermarket and OEM Ignition and Tune-Up Products for your Dodge Caliber, ranging from $2.79 to $145.99.

We offer parts from 13 brands trusted to make quality Ignition and Tune-Up Products for your Dodge Caliber. Before you buy, take some time to read through customer reviews. We currently have 55,242 reviews of Dodge Caliber Ignition and Tune-Up Products from previous customers. Some of the top rated parts include Iridium IX Spark Plug: Outstanding Acceleration & High Durability with 4.9 stars and Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition with 4.6 stars.

Find your Caliber Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge Caliber part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Ignition and Tune-Up Products Brands for Your Dodge Caliber

Our inventory holds Ignition and Tune-Up Products for your Dodge Caliber from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Autolite, NGK, and DENSO, all of which can keep that Dodge happy.
We have Carquest parts available for your Dodge Caliber in categories like Ignition Switches. Some of the top-rated Carquest parts in these categories are:
Ignition Switch
from $46.05
(5)
Ignition Switch
Ignition Starter Switches

Top-Rated Autolite Ignition and Tune-Up Products

Leading Autolite Ignition and Tune-Up Products

We carry Autolite brand parts for your Dodge Caliber across several catalog categories, including Spark Plugs. Some of our most reviewed Autolite parts include:

FAQs for Dodge Caliber Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the Dodge Caliber?

Out of 48 Ignition and Tune-Up Products for the Dodge Caliber, the most popular in our inventory are:
Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition
from $10.99
This product is not rated
Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs

What are the top-rated Dodge Caliber Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your Dodge Caliber based on customer reviews/ratings are:
Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition
from $3.99
(105)
Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition
“ites a spark plug…….it either works or it doesn’t….worked fine”
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IK16TT
from $12.99
(75)
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IK16TT
“Running smoother than worn out plugs, as good as new.”