Daewoo Leganza Cooling and Climate Controls

Essential Daewoo Leganza Cooling and Climate Controls

KAI – A/C Expansion Valve (Part No.ACX011323)

A/C Expansion Valve

from

$33.99
New Standard Replacement A/C Expansion Valve

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Calorstat – Expansion Tank Cap (Part No.G10401074069CAL)

Expansion Tank Cap

from

$13.08
The Calorstat Expansion Tank Cap is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – A/C New; w/ Clutch; w/ V5 Compressor (Part No.T68276)

A/C New; w/ Clutch; w/ V5 Compressor

from

$287.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – Brake Pressure Modulator Sensor Connector (Part No.PTA1017)

Brake Pressure Modulator Sensor Connector

from

$28.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

KAI – A/C Compressor (Part No.ACP010043)

A/C Compressor

from

$289.99
New Standard Replacement A/C Compressor, V5, 700651, L4 Engine

Product Features:
  • V5, 700651, L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1255)

Temperature Sender With Gauge

from

$10.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

ACM – ACM A/C Receiver Drier (Part No.R1040263350ACM)

ACM A/C Receiver Drier

from

$41.01
The ACM A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meets or exceeds the vehicle manufacturer specifications.
  • Utilizes factory style fittings and connectors.
  • Includes the required o-rings and associated hardware
See More

Felpro – THERMOSTAT GASKET (Part No.35820)

THERMOSTAT GASKET

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432479)

Radiator: With Transmission Oil Cooler

from

$159.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10259)

Engine Coolant Reservoir Cap

from

$14.29
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – Connector (Part No.PTA1233)

Connector

from

$26.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Elwis – Engine Coolant Thermostat Gasket (Part No.G4031109370ELW)

Engine Coolant Thermostat Gasket

from

$2.73
The Elwis Engine Coolant Thermostat Gasket is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Seals the thermostat and helps prevent coolant from leaking from the engine for proper engine temperature
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

ACDelco – Engine Coolant Temperature Sensor (Part No.213-4514)

Engine Coolant Temperature Sensor

from

$34.99
ACDelco Professional Engine Coolant Temperature Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Engine Cooling Fan Module

from

$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1237)

Multi Purpose Relay

from

$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – HVAC Variable Speed Blower Controller Module Connector (Part No.PT1017)

HVAC Variable Speed Blower Controller Module Connector

from

$58.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Offering hundreds of high-quality pigtails & sockets for nearly every electrical job
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12033)

Radiator Cap Tester Adapter

from

$93.99
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – A/C Condenser (Part No.6641)

A/C Condenser

from

$176.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to ensure the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

Dorman – Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 180 Degrees (Part No.902-2130)

Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 180 Degrees

from

$35.49
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

AISIN – Water Pump (Part No.G3000568342ASC)

Water Pump

from

$61.32
The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • Advanced technological design.
  • Carbon ceramic sealing.
  • Resistant to corrosion.
  • Optimum cooling performance and longevity.
See More

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Electric Fan - 14" Diameter

from

$99.99
Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

Imperial – Electric Fan – 10" Diameter (Part No.226110)

Electric Fan - 10" Diameter

from

$67.99
Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 10″ Diameter
  • 650 CFM
  • Use as a pusher or puller fan
See More

Helping You Find the Right Cooling and Climate Controls for Your Daewoo Leganza

You love your Leganza. So we’ve made it easier than ever to help you find Daewoo Leganza Cooling and Climate Controls in our online catalog. Our inventory holds 42 aftermarket and OEM Cooling and Climate Controls for your Daewoo Leganza, ranging from $2.73 to $289.99.

We offer parts from 17 brands trusted to make quality Cooling and Climate Controls for your Daewoo Leganza. Before you buy, take some time to read through customer reviews. We currently have 504 reviews of Daewoo Leganza Cooling and Climate Controls from previous customers. Some of the top rated parts include Electric Fan – 14" Diameter with 3.5 stars and Electric Fan – 10" Diameter with 3.6 stars.

Find your Leganza Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Daewoo Leganza part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Cooling and Climate Controls Brands for Your Daewoo Leganza

Our inventory holds Cooling and Climate Controls for your Daewoo Leganza from 17 trusted brands. You’ll find OEM and aftermarket parts from brands like Permatex, Imperial, and Carquest Premium, all of which can keep that Daewoo happy.
We have ACDelco parts available for your Daewoo Leganza in categories like Engine Cooling Parts. Some of the top-rated ACDelco parts in these categories are:
Engine Coolant Temperature Sensor
from $34.99
(1)
Engine Coolant Temperature Sensor
Coolant Temperature Sensors

Top-Rated Permatex Cooling and Climate Controls

Leading Permatex Cooling and Climate Controls

We carry Permatex brand parts for your Daewoo Leganza across several catalog categories, including Engine Cooling Parts. Some of our most reviewed Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for Daewoo Leganza Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the Daewoo Leganza?

Out of 42 Cooling and Climate Controls for the Daewoo Leganza, the most popular in our inventory are:
Coolant Temperature Sensor
from $20.99
This product is not rated
Coolant Temperature Sensor
Coolant Temperature Sensors
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers

What are the top-rated Daewoo Leganza Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your Daewoo Leganza based on customer reviews/ratings are:
Electric Fan - 14" Diameter
from $99.99
(14)
Electric Fan – 14" Diameter
“Fit fine. Easy install. Cools the car.”
Electric Fan - 10" Diameter
from $67.99
(14)
Electric Fan – 10" Diameter
“So, the Air Conditioner Condenser fan motor failed on my 2003 Dodge Ram 1500. It turns out that the 2002 – 2005 Rams all use the same AC Condenser fa”
Thermostatic Fan Control - Preset
from $38.49
(8)
Thermostatic Fan Control – Preset
“I’ve been using this kit for several years on my off road truck. It’s hooked up to a powerful flex-a-lite fan and handles the load with ease. I have”