Chevrolet Venture Suspension Parts
Top Chevrolet Venture Suspension Parts Categories
We carry over 56 Suspension Parts in inventory for the Chevrolet Venture. If you’re looking for aftermarket Suspension Parts for your Chevrolet Venture, check out all these categories:
Essential Chevrolet Venture Suspension Parts
Monroe – Max-Air Air Shock Absorber (Part No.MA824)
from
$101.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
- EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
MOOG – Coil Spring Set (Part No.CC695)
from
$279.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Suncore – Shock Absorber (Part No.12S251130)
from
$20.49
Shock Absorber
KYB – STRUT MOUNTING KIT (Part No.L3033407140KYB)
from
$55.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The highest quality replacement strut mount available
- Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
- Superior rubber reduces noise, vibration and harshness
- Mount bearings provide smoother steering and help retain front end alignment
- Matched grade studs and nuts
Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Carquest Premium – Control Arm (Part No.810-94645B)
from
$138.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest
Product Features:
See More
Product Features:
- Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
- Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
- Pre-installed ball joints and bushings (when applicable) for easy installation
- Fully polished ball studs combined with a greaseable, metal-on-metal design just like OE.
- Hardware included for easier installation
- Product tested in accordance with SAE Spec J193, ensuring ball joint assemblies meet all cuntional requirements of the application.
Monroe – Gas-Matic Strut (Part No.81661)
from
$83.99
Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic passenger cars
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Dorman – Suspension Lateral Arm (Part No.528-235)
from
$60.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Control Arm (Part No.521-011)
from
$281.99
This lateral arm and ball joint assembly is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Strut Mount (Part No.K6521)
from
$116.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE requirements
- Superior rubber to steel bonding for durability
- High polish chrome steel bearing races
- Replacement helps restore vehicle handling
- Includes new spring seat insulator and installation hardware to eliminate noise issues
- Electroplate and corrosion-resistant coating to help prevent galvanic corrosion
Dorman – Air Compressor, Active Suspension, With Mounting Hardware (Part No.949-008)
from
$334.99
This air suspension compressor is designed to match the fit and function of the original compressor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this air suspension compressor is designed to match the fit and function of the original compressor on specified applications
- Ideal solution – this compressor is a reliable replacement for an original part that has failed due to fatigue, moisture infiltration or burnout
- Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
- Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence
Suncore – Quick Strut Kit (Part No.2-55S11210-001)
from
$204.99
Quick Strut Kit
Rare Parts – Control Arm Bushing (Part No.RP19388)
from
$29.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Dorman – Suspension Knuckle Bushing (Part No.905-505)
from
$64.99
This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Strut Bellows (Part No.K90463)
from
$16.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.281670)
from
$149.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
- EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
- CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
- COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK29)
from
$33.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Carquest Premium – Multi Purpose Relay (Part No.RAA1256)
from
$24.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Rare Parts – Spring Insulator (Part No.RP53173)
from
$22.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Reduces road noise
- UV resistant
- No Squeak
Rare Parts – Spring Seat (Part No.RP53176)
from
$73.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Reduces road noise
- Reduces vibration
- UV resistant
Suncore – Shock Kit (Part No.2-12S251130-001)
from
$34.99
Shock Kit
Monroe – Strut-Mate Strut Boot Kit (Part No.63622)
from
$27.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
MOOG – Coil Spring Set (Part No.CC693)
from
$214.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Chevrolet Venture Suspension Parts Categories
Helping You Find the Right Suspension Parts for Your Chevrolet Venture
You love your Venture. So we’ve made it easier than ever to help you find Chevrolet Venture Suspension Parts in our online catalog. Our inventory holds 56 aftermarket and OEM Suspension Parts for your Chevrolet Venture, ranging from $8.49 to $334.99.
We offer parts from 10 brands trusted to make quality Suspension Parts for your Chevrolet Venture. Before you buy, take some time to read through customer reviews. We currently have 5,616 reviews of Chevrolet Venture Suspension Parts from previous customers. Some of the top rated parts include OESpectrum Light Truck Shock Absorber with 4.8 stars and Complete Strut Assembly: Includes Strut, Coil Spring, and Mount with 4.9 stars.
Find your Venture Suspension Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet Venture part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Suspension Parts Brands for Your Chevrolet Venture
Our inventory holds Suspension Parts for your Chevrolet Venture from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Monroe, and Moog, all of which can keep that Chevrolet happy.
We have Driveworks parts available for your Chevrolet Venture in categories like Control Arms. Some of the top-rated Driveworks parts in these categories are:
Top-Rated Monroe Suspension Parts
Leading Monroe Suspension Parts
We carry Monroe brand parts for your Chevrolet Venture across several catalog categories, including Air Suspension and Kits and Shocks and Struts. Some of our most reviewed Monroe parts include:
FAQs for Chevrolet Venture Suspension Parts
What are the most purchased Suspension Parts for the Chevrolet Venture?
Out of 56 Suspension Parts for the Chevrolet Venture, the most popular in our inventory are:
from
$14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
from
$11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
What are the top-rated Chevrolet Venture Suspension Parts?
Top-rated Suspension Parts for your Chevrolet Venture based on customer reviews/ratings are:
from
$93.99
(17)
OESpectrum Light Truck Shock Absorber
“Saved money buying and installing ourselves. Very simple install.”
from
$188.99
(12)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
“Great product. Restored to original ride height. I always buy loaded (with springs) struts when replacing.”
from
$149.99
(11)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
“Excellent direct replacement. Comes complete. Might consider grinding lower bolt holes for more camber adjustment.”
