Chevrolet Silverado 3500 Rear Brake Rotors

Rear Brake Rotors for a Chevrolet Silverado 3500

Use the fitment form at the top of the page to select your exact year and engine type for your Chevrolet Silverado 3500.

CARQUEST Platinum Painted - Brake Rotor - Rear (Part No. YH145339P)
Description
CARQUEST Platinum Painted Rotors feature Rotor Shield, a rust inhibiting barrier that provides up to 5X more protection than non-painted rotors. CARQUEST Platinum Painted Rotors meet or exceed original equipment design delivering superior stopping power with proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Platinum Painted Rotors are designed to dissipate heat, helping to eliminate brake fade and increase the life of your pads. Painted and ready to install out of the box (after cleaning)

Product Features:
Engineered to withstand 120 hours of salt spray testing
Painted and ready to install out of the box after cleaning
Meets or exceeds OE design for superior stopping power
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break in time.

5.0

Read 3 review(s)

Review snapshot ® by PowerReviews

5.0

5.0

5

5

2020-04-28

5

5

Yes nice

Yes nice

Submitted 2020-04-28

By Jay

From Undisclosed

Nice work good

Bottom Line NULL

Nice work good

By Jay from Undisclosed

BOTTOM LINE NULL

5

5

2020-02-26

5

5

yes

yes

Submitted 2020-02-26

By Trey

From Undisclosed

Works great

Bottom Line NULL

Works great

By Trey from Undisclosed

BOTTOM LINE NULL

5

5

2017-08-25

5

5

New coated rotors for your ride best product on the market.

New coated rotors for your ride best product on the market.

Submitted 2017-08-25

By jose

From undisclosed

This new coated rotors are best on the market on my book ,no more rusty rotors.litle pricey but it worth the extra dough.

Bottom Line NULL

This new coated rotors are best on the market on my book ,no more rusty rotors.litle pricey but it worth the extra dough.

By jose from undisclosed

BOTTOM LINE NULL
from $92.99
View Product
CARQUEST Platinum Painted - Brake Rotor - Rear (Part No. YH145260P)
Description
CARQUEST Platinum Painted Rotors feature Rotor Shield, a rust inhibiting barrier that provides up to 5X more protection than non-painted rotors. CARQUEST Platinum Painted Rotors meet or exceed original equipment design delivering superior stopping power with proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Platinum Painted Rotors are designed to dissipate heat, helping to eliminate brake fade and increase the life of your pads. Painted and ready to install out of the box (after cleaning)

Product Features:
Engineered to withstand 120 hours of salt spray testing
Painted and ready to install out of the box after cleaning
Meets or exceeds OE design for superior stopping power
Air gap eliminates brake fade and increases pad life
Non-directional finish decreases break in time.

5.0

Read 3 review(s)

Review snapshot ® by PowerReviews

5.0

5.0

5

5

2021-01-26

5

5

Exact fit. Too early for a quality review. TBD

Exact fit. Too early for a quality review. TBD

Submitted 2021-01-26

By john

From Undisclosed

Exact fit. I like the fact the rotors are painted. We shall see how long they last. TBD.

Bottom Line NULL

Exact fit. I like the fact the rotors are painted. We shall see how long they last. TBD.

By john from Undisclosed

BOTTOM LINE NULL

5

5

2021-01-18

5

5

Yes

Yes

Submitted 2021-01-18

By David

From Undisclosed

Good stuff

Bottom Line NULL

Good stuff

By David from Undisclosed

BOTTOM LINE NULL

5

5

2020-12-15

5

5

would buy again

would buy again

Submitted 2020-12-15

By Dave

From Undisclosed

correct rotor

Bottom Line NULL

correct rotor

By Dave from Undisclosed

BOTTOM LINE NULL
from $71.99
View Product
Carquest Wearever - Brake Rotor - Rear (Part No. YH145260)
Description
CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time.

Product Features:
Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE configuration to dissipate heat, increasing pad life
Proper harmonic design helps to reduce brake noise
Non-directional finish for less break-in time and reduced brake noise
Ready for immediate "out-of-the-box" installation (after cleaning)

4.5

Read 3 review(s)

Review snapshot ® by PowerReviews

4.5

4.5

5

5

2019-07-29

5

5

Dependable

Dependable

Submitted 2019-07-29

By Robert

From Undisclosed

Great quality, no warp.

Bottom Line NULL

Great quality, no warp.

By Robert from Undisclosed

BOTTOM LINE NULL

5

5

2017-10-15

5

5

I would buy this part again

I would buy this part again

Submitted 2017-10-15

By james

From undisclosed

Good part

Bottom Line NULL

Good part

By james from undisclosed

BOTTOM LINE NULL

5

5

2017-07-19

5

5

works great!

works great!

Submitted 2017-07-19

By matt

From undisclosed

works great!

Bottom Line NULL

works great!

By matt from undisclosed

BOTTOM LINE NULL
from $71.99
View Product
Carquest Wearever - Coated Rotor-Rear (Part No. YH145260C)
Description
CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time.

Product Features:
Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE configuration to dissipate heat, increasing pad life
Proper harmonic design helps to reduce brake noise
Environmentally friendly hexavalent chromium (Cr6+) free anti-corrosion coating
Install the disc right out of box, no cleaning necessary
Provide a long lasting clean appearance behind today's open rims

4.5

Read 3 review(s)

Review snapshot ® by PowerReviews

4.5

4.5

4

4

2020-07-21

4

4

The coated rotors look great behind my SS Silverado wheels

The coated rotors look great behind my SS Silverado wheels

Submitted 2020-07-21

By Mike

From Undisclosed

The rotors look and work great on my Silverado

Bottom Line NULL

The rotors look and work great on my Silverado

By Mike from Undisclosed

BOTTOM LINE NULL

5

5

2018-05-15

5

5

Coated are great

Coated are great

Submitted 2018-05-15

By Nicholas

From undisclosed

Go with coated you'll love em They last too

Bottom Line NULL

Go with coated you'll love em They last too

By Nicholas from undisclosed

BOTTOM LINE NULL

5

5

2017-08-19

5

5

I would buy this product again.

I would buy this product again.

Submitted 2017-08-19

By Andrew

From undisclosed

Exact replacement. Pops right on.

Bottom Line NULL

Exact replacement. Pops right on.

By Andrew from undisclosed

BOTTOM LINE NULL
from $73.99
View Product
Carquest Wearever - Brake Rotor - Rear (Part No. YH145339)
Description
CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time.

Product Features:
Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE configuration to dissipate heat, increasing pad life
Proper harmonic design helps to reduce brake noise
Non-directional finish for less break-in time and reduced brake noise
Ready for immediate "out-of-the-box" installation (after cleaning)

4.0

Read 3 review(s)

Review snapshot ® by PowerReviews

4.0

4.0

3

3

2016-07-02

3

3

They are not painted!!

They are not painted!!

Submitted 2016-07-02

By Matt the driver

From Bristol, TN

Only problem I have with these rotors was they were not painted like in the picture. That's was the reason why I spent the extra money & was disappointed when I started installing them.

Bottom Line NULL

Only problem I have with these rotors was they were not painted like in the picture. That's was the reason why I spent the extra money & was disappointed when I started installing them.

By Matt the driver from Bristol, TN

BOTTOM LINE NULL

3

3

2014-10-08

3

3

Works OK.

Works OK.

Submitted 2014-10-08

By JohnACman

From Orlando, fl

Work ok.

Bottom Line recommended

Work ok.

By JohnACman from Orlando, fl

BOTTOM LINE recommended

5

5

2012-05-10

5

5

Fit like a glove

Fit like a glove

Submitted 2012-05-10

By Ron

From Bridgewater, MA

No problems with the installation. Did what it was supposed to do. Good pedal feel.

Bottom Line recommended

No problems with the installation. Did what it was supposed to do. Good pedal feel.

By Ron from Bridgewater, MA

BOTTOM LINE recommended
from $92.99
View Product
Carquest Wearever Frontline - Brake Rotor - Rear (Part No. G12478SD)
Description
CARQUEST Frontline Rotors are manufactured to withstand severe duty abuse, extending the limits of braking punishment. Machined and balanced, Frontline severe duty castings meet or exceed original equipment design delivering better stopping power, superior heat dissipation, and high tensile strength. CARQUEST Frontline Rotors are coated to protect against corrosion and rust build-up which can shorten rotor life. Ready to install out of the box to save you time.

Product Features:
Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE vane configuration to dissipate heat, increasing pad life
Proper harmonic design helps to reduce brake noise
Coating promotes unrestricted heat venting by restricting rust and corrosion build-up
Ready for immediate "out-of-the-box" installation, no need to clean
Advance Auto Parts Rotor Tips: Recommend always use a torque wrench to tighten wheel bolts to the manufacturers' specifications to prevent pedal pulsation
Always replace rotors in pairs to improve stopping power
Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops

3.0

Read 2 review(s)

Review snapshot ® by PowerReviews

3.0

3.0

5

5

2017-06-02

5

5

Awesome product

Awesome product

Submitted 2017-06-02

By Jamie

From undisclosed

Very nice, works great

Bottom Line NULL

Very nice, works great

By Jamie from undisclosed

BOTTOM LINE NULL

1

1

2016-10-10

1

1

Definitely non "exact fit"

Definitely non "exact fit"

Submitted 2016-10-10

By Mark

From Ohio

This is definitely not an "exact fit" part for a 2003 Suburban 2500. The hub hole his too big.

Bottom Line not recommended

This is definitely not an "exact fit" part for a 2003 Suburban 2500. The hub hole his too big.

By Mark from Ohio

BOTTOM LINE not recommended
from $83.99
View Product
Carquest Wearever Frontline - Brake Rotor - Rear (Part No. G12497SD)
Description
CARQUEST Frontline Rotors are manufactured to withstand severe duty abuse, extending the limits of braking punishment. Machined and balanced, Frontline severe duty castings meet or exceed original equipment design delivering better stopping power, superior heat dissipation, and high tensile strength. CARQUEST Frontline Rotors are coated to protect against corrosion and rust build-up which can shorten rotor life. Ready to install out of the box to save you time.

Product Features:
Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE vane configuration to dissipate heat, increasing pad life
Proper harmonic design helps to reduce brake noise
Coating promotes unrestricted heat venting by restricting rust and corrosion build-up
Ready for immediate "out-of-the-box" installation, no need to clean
Advance Auto Parts Rotor Tips: Recommend always use a torque wrench to tighten wheel bolts to the manufacturers' specifications to prevent pedal pulsation
Always replace rotors in pairs to improve stopping power
Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops
from $106.99
View Product
Genuine GM Parts - Rear Disc Brake Rotor (Part No. 177-879)
Description
GM Genuine Parts Disc Brake Rotors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Disc Brake Rotors are metal discs mounted to the wheel hub where the caliper can press the brake pads against the disc surfaces to slow the vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
Inspected for balance, resulting in smooth brake operation and noise reduction
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies
from $138.99
View Product
ACDelco - GM Original Equipment Coated Brake Disc (Rotor) (Part No. N1000154530ACD)
Description
ACDelco GM Original Equipment Disc Brake Rotors are metal discs mounted to the wheel hub where the caliper can press the brake pads against the disc surfaces to slow the vehicle, and are GM-recommended replacements for your vehicle's original components. These disc brake rotors are manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
Inspected for balance, resulting in smooth brake operation and noise reduction
Rust-preventive coating to help protect against corrosion
GM-recommended replacement part for your GM vehicle's original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function
from $134.60
View Product
WBR Coated - Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No. N1000154530WBC)
Description
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:
High metallurgical and machining standard to improve stopping distances
Produced to match OE design fitment - G 3000 gray iron
Mill balanced
TS16949 certified
Non-directional finish provides smooth vibration free performance
No need for machining prior to installation
Durable Metallurgic-Gray finish to all outward non-friction surfaces
Metallurgic-Gray anti-rust protection to help maintain a clean appearance
Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
Designed to minimize brake fade and extend pad and rotor life
from $126.34
View Product
Genuine GM Parts - Rear Disc Brake Rotor (Part No. 177-861)
Description
GM Genuine Parts Disc Brake Rotors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Disc Brake Rotors are metal discs mounted to the wheel hub where the caliper can press the brake pads against the disc surfaces to slow the vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
Inspected for balance, resulting in smooth brake operation and noise reduction
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies
from $107.99
View Product
ACDelco - Professional DuraStop Coated Brake Disc (Rotor) (Part No. N1000577541ACD)
Description
ACDelco Professional DuraStop Brakes are the most thoroughly, independently tested brakes on the aftermarket and are designed to help resist corrosion and premature wear. ACDelco submits its brake products through a range of test methods, including D3EA®, along with Noise/Vibration/Harshness (NVH) and durability/wear testing. This allows us to deliver the high-quality product that an ACDelco customer expects. No manufacturer tests or audits its replacement brake products to the level of ACDelco. Dual Dynamometer Differential Effectiveness Analysis (D3EA®) and SAE J2784.

Product Features:
No machining required - ready to be installed right out of the box
Rust-preventative coating
Mill-balanced for proper rotor function
Quality validated for proper metallurgy and correct brake plate thickness
Non-directional brake surface finish for consistent braking
Chamfer angle follows the OE design
(D3EA®) and SAE J2784 testes and approved
Noise/Vibration/Harshness (NVH) and durability/wear tested
from $103.68
View Product
Bosch - QuietCast Premium Brake Disc (Rotor) (Part No. N1000124875BOS)
Description
Bosch rotors utilize innovative materials that ensure the very highest quality - and prevent brake judder, noise, vibration and harshness. Bosch QuietCast Premium Disc Brake Rotors utilize vehicle specific castings. The heat flow casting process produces superior G3000, GG20, GG15 and HC (high carbon) casting. Bosch castings provide strength and durability not found in competitive product. While competitors may provide a low cost product which helps save money, their castings can crack and provide poor durability. Bosch QuietCast provides consistent, safe and long lasting performance. Alutherm 80 Coating - Bi-metal aluminum and zinc clean-look coating/Alutherm 80 extends the life of the rotor and provides a clean look for today's open wheels

Product Features:
OE-Equivalent and a direct fit replacement
Prevent rust and corrosion with clear-look coating protection
Provide a clean look for today's open-wheeled vehicles
Are 100% balanced for smooth operation
Factory-engraved edge code and minimum thickness specifications Bosch QuietCast Brake Rotors Brochure
from $100.96
View Product
ACDelco - Professional DuraStop Coated Brake Disc (Rotor) (Part No. N1000577626ACD)
Description
ACDelco Professional DuraStop Brakes are the most thoroughly, independently tested brakes on the aftermarket and are designed to help resist corrosion and premature wear. ACDelco submits its brake products through a range of test methods, including D3EA®, along with Noise/Vibration/Harshness (NVH) and durability/wear testing. This allows us to deliver the high-quality product that an ACDelco customer expects. No manufacturer tests or audits its replacement brake products to the level of ACDelco. Dual Dynamometer Differential Effectiveness Analysis (D3EA®) and SAE J2784.

Product Features:
No machining required - ready to be installed right out of the box
Rust-preventative coating
Mill-balanced for proper rotor function
Quality validated for proper metallurgy and correct brake plate thickness
Non-directional brake surface finish for consistent braking
Chamfer angle follows the OE design
(D3EA®) and SAE J2784 testes and approved
Noise/Vibration/Harshness (NVH) and durability/wear tested
from $97.50
View Product
Carquest Wearever - Coated Rotor-Rear (Part No. YH145339C)
Description
CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time.

Product Features:
Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
Exceeds ISO manufacturing guidelines (International Organization for Standardization)
OE configuration to dissipate heat, increasing pad life
Proper harmonic design helps to reduce brake noise
Environmentally friendly hexavalent chromium (Cr6+) free anti-corrosion coating
Install the disc right out of box, no cleaning necessary
Provide a long lasting clean appearance behind today's open rims
from $93.99
View Product
WBR Coated - Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No. N1000124875WBC)
Description
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:
High metallurgical and machining standard to improve stopping distances
Produced to match OE design fitment - G 3000 gray iron
Mill balanced
TS16949 certified
Non-directional finish provides smooth vibration free performance
No need for machining prior to installation
Durable Metallurgic-Gray finish to all outward non-friction surfaces
Metallurgic-Gray anti-rust protection to help maintain a clean appearance
Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
Designed to minimize brake fade and extend pad and rotor life
from $76.52
View Product