Name: Tire Pressure Monitoring System (TPMS) Sensor
Brand: ACDelco
SKU: 15114379
Price: 94.99 USD

from

$94.99

ACDelco GM Original Equipment Tire Pressure Monitoring Sensors (TPMS) are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss), and are GM-recommended replacements for your vehicle’s original components. The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. These original equipment tire pressure monitoring sensors have bn manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Battery is made to last up to 10 years of normal use
Designed to communicate perfectly with your GM vehicle’s TPMS Module
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$12.29

This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.

Product Features:

Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance.
Quality materials – manufactured for durability and a quality finish
Simple installation – no special tools required
Quality tested – this part has undergone dimensional testing to ensure a quality fit

from

$12.99

This wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles.
Ideal solution – this dust cap is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$44.99

Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For use under wheel covers, center caps and hub caps.
Will accept O.E.M. GM screw on plastic lug nut caps.

from

$3.83

Wheel Stud

from

$23.99

Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$189.99

The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Set of 20 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch

from

$45.99

This wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles.
Restores functionality – reliable replacement for an original cap that is missing or damaged due to collision.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.99

Wheel hub bolts rounded off or have damaged threads? These wheel hub bolts are designed to match the performance of original equipment bolts to secure the hub to the knuckle/spindle on specified vehicles.

Product Features:

Direct replacement – these wheel hub bolts are designed to match the performance of the original bolts on specified vehicles.
Ideal solution – made of durable materials to reliably replace bolts with rounded-off or damaged threads.
Application-specific – precision-manufactured to securely mount the hub to the vehicle knuckle/spindle
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$60.99

Protect the braking system from debris and corrosive weather conditions with this rust-resistant replacement brake dust shield. Dimensional verification and salt spray testing ensures proper fit and extended service life.

Product Features:

Effective replacement – designed to match the fit and function of the stock brake dust shield on specific vehicle applications.
Longer service life – corrosion-resistant steel construction protects brakes from elements and debris.
Ideal fix – directly replaces highly deterioration-prone original part
Precision-engineered – has undergone dimensional verification and salt spray testing to ensure quality

from

$169.99

New Standard Replacement Driver Or Passenger Side Rear Inner Wheel House, 36 X 12 X 7

Product Features:

36 X 12 X 7, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$75.99

Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$52.99

Manufactured with premium-grade steel, National cylindrical bearings are designed and engineered to meet OE specifications.

Product Features:

STRONG AND DURABLE — Controlled heat treatment process for strength and durability
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for durability and performance
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
Professional technicians know they can depend on National

from

$20.29

SHAFT SEAL

from

$6.49

Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$6.99

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles.
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$141.99

Damaged your wheel, or looking to upgrade? This wheel is specifically designed to directly replace the original wheel on certain vehicle applications. It is thoroughly tested to meet safety standards for reliable performance.

Product Features:

Direct replacement – this wheel is designed to match the fit and structural appearance of the original wheel on specific vehicle years, makes and models.
Cost-effective solution – offers original equipment quality and appearance for a competitive price.
Thoroughly tested – dynamic radial testing, radial run-out testing, and axial run-out testing ensures performance
Trustworthy quality – backed by team of designers and engineers in the United States

from

$75.99

Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$216.99

CARQUEST PROFESSIONAL grade series hub assemblies are exclusively engineered for demanding conditions and built for durability with professional-grade components. CARQUEST PROFESSIONAL provides the OE high quality and the manufacturing processes to match

Product Features:

OE matched design for perfect Fit, Form and Function
Professional grade manufacturing for extended duration
Enhanced corrosion resistant wheel studs to reduce unsightly rust build-up
Precision-machined to stringent tolerances provides high quality and longer endurance.
Superior ABS sensors for OEM matching signal, strengthened ABS cord insulation and socket connections for durability and contamination prevention (where applicable)
Bearings and seals are constructed and engineered to the requirements of your vehicle resulting in maximum performance
Roll form bearing design
Supplied by OE Manufacturer’s AutoCare Division – translating into superior quality and expertise. (where applicable)

from

$525.99

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$9.49

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

Black anodized clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
0.453″ rim hole compatibility
200 PSI maximum cold inflation pressure

from

$68.99

Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:

MX-Sensor Components
4 Metal Valves
4 Rubber Valves
Rubber Gasket (2×10 pcs)
Screw Nut (2×10 pcs)
Washer (2×10 pcs)
Metal Valve Cap (2X10 pcs)
Rubber Valve Cap (2X10 pcs)
Valve Core (2X10 pcs)

from

$3.49

Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change

from

$8.29

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles.
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$44.99

Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.

Product Features:

Guaranteed for life not to rust, chip, or peel.
Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For aluminum wheels only.
Requires 65301 or 65302 Installation Tool sold separately.

Chevrolet Silverado 1500 HD Wheels and Tires

Top Chevrolet Silverado 1500 HD Wheels and Tires Categories

Essential Chevrolet Silverado 1500 HD Wheels and Tires

ACDelco – Tire Pressure Monitoring System (TPMS) Sensor (Part No.15114379)

Dorman – Wheel Lug Nut Cover: M27-2.0 Thread, 39.4 mm Depth, Plastic, Black, 4 Pack (Part No.711-025)

Dorman – Help – Wheel Hub Dust Caps (Part No.13920)

McGard – Cone Seat- Under Hub Cap Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24019)

Dorman – Wheel Stud (Part No.O8060833065DOR)

Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)

McGard – Chrome Cone Seat Wheel Installation Kit for 6 Lug Vehicles (M14 x 1.5 Thread Size) (Part No.84620)

Dorman – Wheel Center Cap (Part No.909-002)

Dorman – Hub And Bearing Mounting Bolts (Part No.917-517)

Dorman – Brake Dust Shield – 1 Pair (Part No.924-223)

KAI – Wheel Housing (Part No.RRP3817)

COAST TO COAST – 17 Inch, 8 Hole, Gloss Black, Plastic, Set Of 4, Compatible With Steel Wheels (Part No.IWCIMP64GBLK)

National – Wheel Bearing: Direct Fit, 1 Piece (Part No.R-1561-TV)

FAG US – SHAFT SEAL (Part No.SS2758)

Schrader – TPMS Sensor Service Kit (Part No.34000)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Acorn, 1.42" Length, Chrome, 4 Pack (Part No.711-609)

Dorman – 17 x 7.5 In. Steel Wheel (Part No.939-186)

COAST TO COAST – 17 Inch, 8 Hole, Snap-On, Plated, Chrome, Abs Plastic, Set Of 4 (Part No.IWCIMP64X)

Carquest Professional – Wheel Bearing and Hub Assembly (Part No.94-49088)

Autel – MX-Sensor 1-SensorM Bulk Box (20) (Part No.300060)

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Black Anodized Valve Stem (Part No.VS925B)

Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)

Schrader – TPMS Sensor Service Kit (Part No.20008)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Acorn, 1.385" Length, Chrome, 4 Pack (Part No.711-605)

McGard – Chrome Cone Seat SplineDrive Lug Nut Set (M14 x 1.5 Thread Size) – Set of 4 (Part No.65310)

Chevrolet Silverado 1500 HD Wheels and Tires Categories

Helping You Find the Right Wheels and Tires for Your Chevrolet Silverado 1500 HD

Top Wheels and Tires Brands for Your Chevrolet Silverado 1500 HD

Top-Rated Schrader Wheels and Tires

Leading Schrader Wheels and Tires

FAQs for Chevrolet Silverado 1500 HD Wheels and Tires

What are the most purchased Wheels and Tires for the Chevrolet Silverado 1500 HD?

What are the top-rated Chevrolet Silverado 1500 HD Wheels and Tires?

Find Your Chevrolet Silverado 1500 HD Wheels and Tires by Year

More Popular Parts for All Makes