Chevrolet S10 Drivetrains

Essential Chevrolet S10 Drivetrains

Pro-King – Differential Rebuild Kit (Part No.741A004A)

Differential Rebuild Kit

from

$129.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:
  • Contains the highest quality Japanese bearings
See More

Rugged Ridge – Hub Service Kit (Part No.15001.39)

Hub Service Kit

from

$364.99
Are you looking to replace your manual locking hubs? Rugged Ridge has you covered with this pair of OE replacement manual locking hubs that fit the 30-spline Dana 50 and Dana 60 front axle shafts in 76-90 1-ton Chevy trucks, 90-93 3/4 ton and 1-ton Dodge

Product Features:
  • Hub Service Kit
See More

Motive Gear – Differential Carrier Gear Kit (Part No.GM10BI-30)

Differential Carrier Gear Kit

from

$153.99


Product Features:
  • GM10 BOLT 8.5″ 30 SPL INTERNAL KIT 1988-1999 (OPEN)
See More

MOOG Driveline Products – Universal Joint Strap Kit (Part No.360-10)

Universal Joint Strap Kit

from

$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 354, 368, 369, 445 & 455
  • Contains two 1.59″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
See More

Felpro – Transfer Case Adapter Gasket (Part No.72769)

Transfer Case Adapter Gasket

from

$20.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

FAG US – General Seal (Part No.SS2911)

General Seal

from

$52.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:
  • High-precision and High-quality components used in all KITs
  • Coverage of classic and new high-tech solutions for the best system coverage
See More

USA Standard Gear – TCaseShiftForkInsert (Part No.70666)

TCaseShiftForkInsert

from

$11.99
TCaseShiftForkInsert

Dorman – 1-Piece Steel Driveshaft Assembly (OE Fix) (Part No.938-219)

1-Piece Steel Driveshaft Assembly (OE Fix)

from

$422.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX front drive shaft makes the U-joints serviceable for simpler maintenance.

Product Features:
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
  • Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
  • All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

Posi Spring Kit For GM 7.5", With Preload Plates

from

$153.99
Product Features:
  • Positraction spring kit
  • Fits GM 7.5″ and 7.625″ Dura Grip
  • Includes preload plates
See More

Yukon Gear – 8.6" GM Standard Open Side Gear Thrust Washer (Part No.33386)

8.6" GM Standard Open Side Gear Thrust Washer

from

$4.99
8.6″ GM standard Open side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 8.6″
See More

Dorman – Spindle Washer – I.D. 24.7mm O.D. 45.1mm Thickness 4.7mm (Sold by each) (Part No.618-027)

Spindle Washer - I.D. 24.7mm O.D. 45.1mm Thickness 4.7mm (Sold by each)

from

$2.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Axle Shaft (Part No.630-111)

Axle Shaft

from

$224.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Yukon Gear – 7.2" Stub Axle Seal (Part No.30276)

7.2" Stub Axle Seal

from

$44.99
7.2″ stub axle seal.Yukon Mighty seal.

Product Features:
  • Inner axle seal
  • Fits 1983-1997 GM 7.2″ IFS
See More

Dorman – Differential Ring and Pinion Set (Part No.697-318)

Differential Ring and Pinion Set

from

$1141.99
This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications
  • Effective fix – eliminates grinding and whining from failed original bearings
  • Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Yukon Gear – Chrome Cover For 8.6", 8.5" And 8.2" GM Rear (Part No.32017)

Chrome Cover For 8.6", 8.5" And 8.2" GM Rear

from

$74.99
Chrome cover for 8.6″, 8.5″ and 8.2″ GM rear.

Product Features:
  • Fits GM 8.2″, 8.5″ and 8.6″
  • Chrome
See More

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Pinion Seal, New Design Yoke With Triple Lip For GM 8.5" And 8.6" (Part No.30163)

Pinion Seal, New Design Yoke With Triple Lip For GM 8.5" And 8.6"

from

$35.99
Pinion seal, new design yoke with triple lip for GM 8.5″ and 8.6″.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits GM 8.6″
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1104)

Differential Pinion Shim Kit

from

$12.99


Product Features:
  • KIT SHIM
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

National – Multi-Purpose Seal (Part No.710496)

Multi-Purpose Seal

from

$39.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
  • Excellent high temperature capabilities
  • Compatible with wide range of fluids
  • Delivers quality and reliable performance for every type of repair
See More

Richmond Gear – Differential Cross Shaft (Part No.CSPGM75)

Differential Cross Shaft

from

$26.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Powertrax – Lock Right Locker (Part No.1930-LR)

Lock Right Locker

from

$445.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $21.49
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1955-2018
    • Weight approx: 3 Lbs
    • BEARING ID / BORE: 1.3780 INCH / 35 MM
    • CENTERLINE: 2.28 INCH / 58 MM
    • MOUNT WIDTH: 6.62 INCH / 168 MM
    • STYLE: ROUND FRAME
    • COMPLETE MOUNT
    See More

    Pro-King – Differential Pinion Yoke Washer (Part No.742A215)

    Differential Pinion Yoke Washer

    from

    $4.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Standard Open Pinion Gear And Thrust Washer For 7.2" GM (Part No.33376)

    Standard Open Pinion Gear And Thrust Washer For 7.2" GM

    from

    $7.99
    Standard open pinion gear thrust washer for 7.2″ GM.

    Product Features:
    • Pinion gear thrust washer
    • Fits GM 7.2″ IFS
    See More

    Chevrolet S10 Drivetrains Categories

    Helping You Find the Right Drivetrains for Your Chevrolet S10

    You love your S10. So we’ve made it easier than ever to help you find Chevrolet S10 Drivetrains in our online catalog. Our inventory holds 679 aftermarket and OEM Drivetrains for your Chevrolet S10, ranging from $2.29 to $2,219.99.

    We offer parts from 31 brands trusted to make quality Drivetrains for your Chevrolet S10. Before you buy, take some time to read through customer reviews. We currently have 72,715 reviews of Chevrolet S10 Drivetrains from previous customers. Some of the top rated parts include Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket with 4.7 stars and Universal Joint with 4.4 stars.

    Find your S10 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet S10 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

    Top Drivetrains Brands for Your Chevrolet S10

    Our inventory holds Drivetrains for your Chevrolet S10 from 31 trusted brands. You’ll find OEM and aftermarket parts from brands like Mobil Oil, Moog, and Royal Purple, all of which can keep that Chevrolet happy.
    We have Powertrax parts available for your Chevrolet S10 in categories like Differentials. Some of the top-rated Powertrax parts in these categories are:
    Grip LS Traction System
    from $503.99
    (1)
    Grip LS Traction System
    Complete Differentials

    FAQs for Chevrolet S10 Drivetrains

    What are the most purchased Drivetrains for the Chevrolet S10?

    Out of 679 Drivetrains for the Chevrolet S10, the most popular in our inventory are:

    What are the top-rated Chevrolet S10 Drivetrains?

    Top-rated Drivetrains for your Chevrolet S10 based on customer reviews/ratings are:
    Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket
    from $10.99
    (195)
    Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket
    “Worked as described”
    Universal Joint
    from $31.99
    (65)
    Universal Joint
    “Quality ujoint at a good price”
    CV Axle Shaft Assembly
    from $102.99
    (59)
    CV Axle Shaft Assembly
    “worked exactly for what i needed and was a perfect fit. would definitely recommend”