Chevrolet R3500 Parts

Chevrolet R3500 Body Parts

KAI – Mirror Assembly: Driver Side, Manual Adjustment, Foldable, 1 Pk (Part No.GM1320111)

Mirror Assembly: Driver Side, Manual Adjustment, Foldable, 1 Pk

from

$39.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Driver Or Passenger Side Manual Door Mirror, Below Eyeline Type, Stainless Steel. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Below Eyeline Type, Stainless Steel, Flat Glass
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Truck Floor Support (Part No.RRP117)

Truck Floor Support

from

$12.99
New Standard Replacement Front Cab Floor Support, Slip-On Style, 13 X 4

Product Features:
  • Slip-On Style, 13 X 4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dee Zee – Cut To Fit, Without Raised Edges, 97.25"L X 64" W, Black, Rubber (Part No.DZ86793)

Cut To Fit, Without Raised Edges, 97.25"L X 64" W, Black, Rubber

from

$148.99
If you have ever scratched your truck bed then you know the feeling that follows when you hear the sound of your investment losing value. You toss a lot of things in the bed of your truck, why not let one of them be a little protection. Dee Zee Bed Mats are a cost-effective solution for keeping your truck bed surface free from scratches, dings, and dents caused by loading and unloading, or cargo shifting around during transport. Dee Zee Bed Mats custom fit your truck contours for ultimate coverage. Concerns about trapped water and rust are non-existent since our truck mats use rubber cleats on the underside to facilitate drainage and keep the Bed Mat securely in place. Made with superior manufacturing, each heavy-duty Dee Zee Bed Mat is constructed from .375 Inch high-density Fiber Infused Rubber compound that resists abrasion and tears from your cargo. The tightly compressed Rubber fibers can handle common gas or oil spills, making them perfect for transporting motorized work equipment or all-terrain vehicles. Your custom fit Bed Mat deflects harmful UV rays and will not crack, rust or break- even in the most extreme temperatures.

Product Features:
  • Helps Prevent Cargo From Shifting And Damaging Your Truck Bed
  • Rubber Cleats Help Keep The Mat In Place
  • Made From Nyracord(R), A High Strength, Cord Enhanced Rubber Compound
  • Will Not Crack, Rust Or Break Even In Extreme Temperatures
  • Resists Most Chemical Spills
  • Custom Fit Application
  • Custom Fit Applications Contour Around Wheel Wells For A Perfect Fit
  • Made In USA
See More

KAI – Door Mirror Glass (Part No.CH1323574)

Door Mirror Glass

from

$36.99
New Standard Replacement Driver And Passenger Side Replacement Mirror Glass, 10 7/8, Camper Style, Flat

Product Features:
  • 10.875, Camper Style, Flat, Flat Glass
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Door Jamb Switch (Part No.SAA3753)

Door Jamb Switch

from

$5.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

K-Source – Replacement Mirror Glass (Part No.90055)

Replacement Mirror Glass

from

$18.99
Cadillac/Chevrolet/GMC Passenger Side Replacement Mirror Glass

Product Features:
  • Passenger side
  • Adhesive tape included
  • Glass fits mirrors with manual, functions only
See More

K-Source – 88-02, CHEVY full size P-U Sport Model, Driver, Manual (Part No.62024G)

88-02, CHEVY full size P-U Sport Model, Driver, Manual

from

$68.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
  • Mirror glass to be adjusted by hand
  • This Mirror does not fold
  • Black
  • Superior material and manufacturing process ensures the highest quality possible
See More

KAI – Truck Bed Panel (Part No.GMK414482873L)

Truck Bed Panel

from

$29.99
New Goodmark Driver Side Tailgate Post Patch, For Fleetside Models

Product Features:
  • For Fleetside Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Door Lock Actuator, Front, Rear (Part No.746-014)

Door Lock Actuator, Front, Rear

from

$56.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

KAI – Tailgate Handle (Part No.GMK414583681)

Tailgate Handle

from

$28.99
New Goodmark Tailgate Handle, For Fleetside Models

Product Features:
  • For Fleetside Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ARIES – Durable Truck Headache Rack: Protect Your Cab from Impact and Sun Damage (Part No.111000)

Durable Truck Headache Rack: Protect Your Cab from Impact and Sun Damage

from

$249.99
For the heavy-duty hauler and hardworking trailer blazer, a headache rack is a must-have truck accessory. It does not take much for a two-by-four, steel pipe or other loose cargo to put a good size crack in the rear window of your truck cab, especially when you stick to the off-road trail more than the paved road. The ARIES classic headache rack offers a hardy design and sturdy structure to make sure your truck is ready to work. Made from 1″ x 2″ carbon steel tubing, ARIES classic headache racks provide excellent protection for your truck cab, from both the heat of the sun and potential impact from unsecure cargo in your truck bed. The full louvers help keep your cab cooler throughout the day, and their heavy-duty construction helps block any damage from behind. The ARIES classic headache rack also features a dual-layer E-coat and semi-gloss black powder coat finish to maintain its sleek appearance, preventing damage from rust, scratches and UV rays. Installation is quick and easy with the ARIES headache rack. It is compatible with cross-bed truck tool boxes and includes all necessary hardware for a complete installation. When your pickup truck is more than just a show horse, ARIES has you covered. We understand that it’s about more than goofing off in the mud. When you have a job to finish and a workhorse to drive, an ARIES classic headache rack is a reliable tool in your belt.

Product Features:
  • Heavy-duty 1″ x 2″ steel tube construction for a solid frame
  • Dual-layer E-coat and black powder coat finish for maximum corrosion resistance
  • Fully louvered center section to protect the cab and passengers
  • Louvers also help keep the cab cooler by blocking direct sunlight
  • Flat steel brackets bolt onto the truck bed walls (drilling may be required)
  • Compatible with most crossover truck tool boxes
See More

Le Bra – Front End Cover (Part No.55220-01)

Front End Cover

from

$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforate

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

KAI – Sheetmetal Sheet (Part No.RRP960)

Sheetmetal Sheet

from

$14.99
New, Standard Replacement Flex Edge, With 3/4 Lip, 36 X 3

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Or Modifications Needed For Installation
  • Same Form Fit As OE
See More

AmeriSeal – Beltline Kit Front Door (Part No.31254)

Beltline Kit Front Door

from

$86.99
Beltline Kit Front Door, Inner + Outer- 4 pcs.
See More

KAI – B-Pillar/Rocker Panel (Part No.RRP102)

B-Pillar/Rocker Panel

from

$41.99
New Standard Replacement Passenger Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:
  • 46 3/4 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ARIES – 3 Inch Bull Bar (Part No.B35-4009)

3 Inch Bull Bar

from

$237.99
The ARIES 3″ bull bar is made for those who face the uncertain road without fear. This particular model is constructed from strong carbon steel and finished in a durable E-coat and semi-gloss black powder coat finish to outlast rust and the elements. Other available finishes include high-gloss black stainless steel, polished stainless steel and textured black steel. Customizing the look of your vehicle is simple with the ARIES 3″ bull bar. It is equipped with pre-drilled light mounting holes and a removable skid plate. The center crossbar features two pre-drilled holes that readily accept an LED light bar or two LED work lights. The skid plate is made from 304 stainless steel and has a brushed finish to stop rust and hide scratches and scuffs. It also features an aggressive, ARIES-exclusive cutout pattern and can be removed for a customized look. Each ARIES 3″ bull bar is made a vehicle-specific design, meaning that for each make and model, the bull bar has a custom bend and unique mounting brackets. This allows for the best possible fit on your vehicle and ensures solid attachment. The brackets also use pre-existing factory holes in the vehicle’s frame to eliminate drilling, speed up installation and increase rigidity. This bull bar fits select model years of the Chevrolet Blazer and Chevrolet or GMC C1500, C2500, C3500, K1500, K2500 and K3500 (see application info to verify fitment).

Product Features:
  • 3″ diameter, heavy-wall tubing constructed from high-strength steel
  • Durable, rust-resistant E-coat and semi-gloss black powder coat finish
  • Two pre-drilled holes in the crossbar for mounting LED light bars or work lights
  • Removable, brushed 304 stainless steel skid plate deflects small road debris
  • No-drill, vehicle-specific application for a custom fit
See More

Dee Zee – Powder Coated, Black, Steel, Unlighted, 7"W x 90"L (Part No.DZ15321S)

Powder Coated, Black, Steel, Unlighted, 7"W x 90"L

from

$506.99
Dee Zee Rough Step – Industrial gauge steel coated in Dee Zee black NRT (No Rust Technology) powder coat to increase corrosion resistance. Industrial grating step provides extra traction getting in and out of the vehicle while allowing mud, water, snow, and ice to drain off the stepping area.

Product Features:
  • No Rust Technology Powder Coat Is A Specially Designed To Increase Corrosion Protection
  • Industrial Grating Step Provides Extra Traction Getting In And Out Of The Vehicle While Allowing Mud, Water, Snow, And Ice To Drain Off The Stepping Area
  • Rugged 12 Gauge Steel Construction
  • Protective Black Powder Coat Finish
  • Grated Steel Top Provides Unmatched Traction
See More

KAI – Door Hinge (Part No.GMK4144401772L)

Door Hinge

from

$59.99
New Goodmark Driver Side Lower Front Door Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Tailgate Stop Bumper (Part No.GMK4143826672P)

Tailgate Stop Bumper

from

$34.99
New Goodmark Pair Of Lower Tailgate Bumpers

Product Features:
  • Pair
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1752)

Multi Purpose Relay

from

$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Hood Release Cable With Handle (Part No.912-020)

Hood Release Cable With Handle

from

$40.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this hood release cable is made to match the original cable on specific vehicles
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

KAI – Bumper Face Bar (Part No.GM1002142V)

Bumper Face Bar

from

$359.99
New Economy Replacement Front Bumper, Chrome, Without Pad Holes

Product Features:
  • Chrome, Without Pad Holes, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Quarter Panel Patch (Part No.RRP150)

Quarter Panel Patch

from

$49.99
New Standard Replacement Passenger Side Quarter Panel Rear Section, 60 1/2 X 28

Product Features:
  • 60 1/2 X 28, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Wheel Arch Panel (Part No.RRP113)

Wheel Arch Panel

from

$24.99
New Standard Replacement Passenger Side Slip-On Rear Fender Section, 41 5/8 X 12

Product Features:
  • 41 5/8 X 12, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.RRP083)

Floor Pan

from

$98.99
New Standard Replacement Driver Side Extended Cab Floor, 24 X 33

Product Features:
  • 24 X 33, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Chevrolet R3500 Transmission Parts

ATP – AT SOLENOID SEAL (Part No.JO-15)

AT SOLENOID SEAL

from

$3.99
AT SOLENOID SEAL

ATP – AT EXT HOUSING SEAL (Part No.JO-57)

AT EXT HOUSING SEAL

from

$7.99
AT EXT HOUSING SEAL

National – Multi Purpose Seal (Part No.8792S)

Multi Purpose Seal

from

$6.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18663)

Transmission Oil Pan Gasket

from

$10.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2638)

Transmission Mount: Rear, 1 Piece

from

$23.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CADI 99-14; CHEV 82-19; GMC 82-14; HUMMER 03-10; ISUZU 06-08; OLDS 91-94;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 1982-2019
  • Weight approx: 5 Lbs
  • STUDS: M10-150
  • INTERLOCK
  • BOLT HOLES CENTERLINE: 7.5 INCH / 190.5 MM
See More

ATP – AT OVERHAUL KIT (Part No.JGS-59)

AT OVERHAUL KIT

from

$144.99
AT OVERHAUL KIT

ATP – A/T FLYWHEEL BOLT (Part No.ZX-2036)

A/T FLYWHEEL BOLT

from

$12.99
A/T FLYWHEEL BOLT

Driveworks – Auto Transmission Shift Shaft Seal (Part No.S-8792S)

Auto Transmission Shift Shaft Seal

from

$2.49
Product Features:
  • Brand may vary by location
See More

National – Cylindrical Bearing (Part No.5707)

Cylindrical Bearing

from

$22.99
Manufactured with premium-grade steel, National® cylindrical bearings are designed and engineered to meet OE specifications.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.109)

Bearings

from

$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1007)

ABS Wheel Speed Sensor Connector

from

$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Mr. Gasket – Chrome Automatic Transmission Oil Pan with Drain Plug (Part No.9732)

Chrome Automatic Transmission Oil Pan with Drain Plug

from

$65.99
Stock depth chrome plated automatic transmission pans are complete with drain plug, washer and gasket. Matching dipsticks with tubes sold separately.

Product Features:
  • Stock depth and capacity
  • Chrome plated
  • Includes drain plug/washer/gasket
See More

B & M – DEPTH PAN CHROME HP (Part No.20289)

DEPTH PAN CHROME HP

from

$113.99
B&M Deep Transmission Pans increase the fluid capacity of your transmission, improving the cooling, allowing your transmission to work as efficiently as possible. Included drain plug, eliminates the need to drop the pan to drain the fluid.

Product Features:
  • Additional Oil Capacity
  • More Cooling Ability
  • No Dipstick Modification
  • Some Include Fluid Pickup Extension
  • Built-In Drain Plugs
  • Chrome Plated Steel
See More

Carquest Premium – Automatic Transmission Pressure Control Solenoid (Part No.SBA4929)

Automatic Transmission Pressure Control Solenoid

from

$109.99
Transmission pressure control solenoids are computer controlled oil flow control valves used to apply pressure to automatic transmission clutch packs. All control solenoids meet or exceed original equipment design and quality specifications.
See More

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.241018)

Econo-Kool® Transmission Oil Cooler

from

$65.99
Product Features:
  • Imperial Econo-Kool« tube and fin transmission cooler
  • Size: 3/4″ x 10″ x 15-7/8″
  • Class “A” motor homes, large travel trailers, 5th-wheel trailers
  • GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

ATP – AT CONTR SOLENOID (Part No.JE-14)

AT CONTR SOLENOID

from

$93.99
AT CONTR SOLENOID

National – Bearings (Part No.A-35)

Bearings

from

$25.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

NTK – ABS Wheel Speed Sensor (Part No.AU0137)

ABS Wheel Speed Sensor

from

$39.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK ABS Wheel Speed Sensor connectors, mounts and wire lengths are an exact match to OE for worry free installation. Grease, mounting nut and instruction sheet included where applicable.
  • NTK’s Wheel Speed Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function. Manufactured with weather pack connectors to prevent dirt and moisture contamination.
  • The ABS ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up.
See More

National – Bearings (Part No.B-5020)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

ATP – AT OIL PUMP SEAL (Part No.CO-4)

AT OIL PUMP SEAL

from

$14.99
AT OIL PUMP SEAL

Carquest Premium – ABS Wheel Speed Sensor (Part No.SBC3676)

ABS Wheel Speed Sensor

from

$44.99
The anti-lock brake system (ABS) wheel speed sensor provides a signal to the electronic brake control module (EBCM) identifying the speed at which each wheel or axle is turning. Ideally all wheels are rotating at an equal speed or with an adjusted rate, but a sudden drop in wheel speed will indicate that one or more tires are locking up due to a vehicle skid condition. The EBCM will pulse the brake fluid pressure allowed to the skidding tire until the vehicle is brought under control.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Magnet size and strength optimized for precise signal output.
  • Precision-wound coated copper windings increase signal output and increase longevity.
  • Tailored magnetic circuit programming enhances timing accuracy between the reluctor wheel and circuit output.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
See More

ATP – AT MASTER REPAIR KIT (Part No.JM-22)

AT MASTER REPAIR KIT

from

$441.99
AT MASTER REPAIR KIT

ATP – AT CLUTCH PLATE (Part No.JC-50)

AT CLUTCH PLATE

from

$8.99
AT CLUTCH PLATE

ATP – Automatic Transmission Universal Detent Cable 28 to 48 inches (Part No.Y-752)

Automatic Transmission Universal Detent Cable 28 to 48 inches

from

$41.49
ATP Universal Fit Detent Cables are designed to cover many applications and are no compromise replacement parts

Product Features:
  • Includes brackets, grommets, etc to match original
  • Fits many GM transmissions
  • Adjustable
See More

ATP – AT OIL PUMP ORING (Part No.SO-21)

AT OIL PUMP ORING

from

$8.99
AT OIL PUMP ORING

Chevrolet R3500 Clutch Systems

LuK – Clutch Master Cylinder (Part No.LMC128)

Clutch Master Cylinder

from

$43.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

ATP – CLUTCH FORK (Part No.ZA-108)

CLUTCH FORK

from

$32.99
CLUTCH FORK

Driveworks – Clutch Release Bearing (Part No.S-614083)

Clutch Release Bearing

from

$33.99
Product Features:
  • Brand may vary by location
See More

Dorman – Help – Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In (Part No.74070)

Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In

from

$12.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ATP – Automatic Transmission Flex Plate (Part No.Z-136)

Automatic Transmission Flex Plate

from

$75.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

LuK – Clutch Kit: 11 7/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.04-122)

Clutch Kit: 11 7/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline

from

$161.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

Sachs – Clutch Release Bearing (Part No.I2020426255SAC)

Clutch Release Bearing

from

$39.91
The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:
  • Extended service life
  • Compact, lightweight design
  • Sealed for life with high performance, application-specific grease
  • Simplified assembly
  • Integrated functionality
  • Design flexibility
See More

ATP – Flywheel Ring Gear (Part No.ZA-500)

Flywheel Ring Gear

from

$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • Eliminates grinding from damaged teeth
  • Increases starter drive life
See More

ATP – FLYWHEEL SHIM (Part No.GS-4)

FLYWHEEL SHIM

from

$26.99
FLYWHEEL SHIM

Dorman – Clutch Pilot Bushing .593 In. x 1.09 In. Type A, Length .750 In. (sold by each) (Part No.690-014)

Clutch Pilot Bushing .593 In. x 1.09 In. Type A, Length .750 In. (sold by each)

from

$5.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ATP – AT CLUTCH PLATE (Part No.JC-57)

AT CLUTCH PLATE

from

$12.99
AT CLUTCH PLATE

Sachs – Super Set Clutch Kit (Part No.I203052676SAC)

Super Set Clutch Kit

from

$192.03
As an OE clutch, clutch system and component supplier, Sachs products are developed to meet the highest demands of the worlds’s leading car manufacturers. With a complete program to satisfy a one-stop-shop need for complete clutch system replacement parts, unsurpassed quality and unmatched Asian, Domestic and European coverage, SACHS brand confirms itself as the premier OE clutch product available to the aftermarket. In order to reduce installation time, SACHS Super Set Clutch Kits come with everything needed for installations. All kits included in the catalog have also been tested to meet or exceed OE specifications and cycle tested in order to reduce returns.

Product Features:
  • OE Quality and direct fit application.
  • Original Equipment Supplier
  • Clutch kit contains; disc, pressure plate, release bearing and pilot bearing when required.
  • Most complete clutch kit line offering in the industry
  • Unmatched Asian, Domestic and European coverage
  • Exclusive parts not available through other suppliers
  • Complete range of complimentary parts and upgrades
See More

ARP Auto Racing – For Use With 265/ 502 Chevy V8, 3/8"-16 Thread, 200000Psi Tensile, Hex Head (Part No.230-2202)

For Use With 265/ 502 Chevy V8, 3/8"-16 Thread, 200000Psi Tensile, Hex Head

from

$34.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:
  • High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 Psi
  • Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
  • Large Diameter, Low Profile Design
  • Complete With Washers
  • 200,000 PSI
  • 1″ Underhead Length
  • 3/8″-16 Thread Size
See More

Carquest Wearever – Clutch Hydraulic Hose (Part No.BHA38559)

Clutch Hydraulic Hose

from

$45.99
Engineered from high-quality materials to ensure chemical and thermal resistance, our Clutch Hydraulic Hose restores and maintains optimal clutch performance.

Product Features:
  • Direct replacement for a proper fit every time
  • Integral brackets included for ease of installation (where applicable)
  • Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
  • All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met
  • Brand may vary by location
See More

Carquest Wearever – Brake Hydraulic Hose (Part No.H38559)

Brake Hydraulic Hose

from

$62.99
Engineered from high-quality materials to ensure chemical and thermal resistance, Tru-Torque’s Clutch Hydraulic Hose restores and maintains optimal clutch performance. New hose replacement is recommended as part of a complete clutch repair for your vehicle.

Product Features:
  • Direct replacement for a proper fit every time
  • Integral brackets included for ease of installation (where applicable)
  • Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
  • All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met
See More

ATP – CLUTCH FORK (Part No.JX-104)

CLUTCH FORK

from

$8.99
CLUTCH FORK

GM Genuine Parts – Manual Transmission Clutch Pilot Bearing (Part No.CT1078)

Manual Transmission Clutch Pilot Bearing

from

$24.29
GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Support the end of the transmission input shaft while the clutch is disengaged
  • Allows for smooth changing of gears
  • Helps keep transmission input shaft properly aligned
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Clutch Pilot Bearing/ Bushing (Part No.690-057)

Clutch Pilot Bearing/ Bushing

from

$28.49
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
  • Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Bearings (Part No.57080)

Bearings

from

$31.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC119)

LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER

from

$27.49
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

ATP – CLUTCH FORK (Part No.JX-111)

CLUTCH FORK

from

$9.99
CLUTCH FORK

Chevrolet R3500 Automotive Accessories

Fiamm – Freeway Blaster High Note Horn (Part No.7210223)

Freeway Blaster High Note Horn

from

$25.99
This High Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact and lightweight and they meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.
See More

Fiamm – Freeway Blaster Low Note Horn (Part No.7211223)

Freeway Blaster Low Note Horn

from

$19.99
This Low Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact, lightweight and meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.
See More

Auto Ventshade (AVS) – Ventvisor Window Visors: Outside Mount, Smoke, Front, 2 Pc (Part No.92099)

Ventvisor Window Visors: Outside Mount, Smoke, Front, 2 Pc

from

$49.99
With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:
  • Precision engineered for a custom fit on your vehicle with modern, curved design
  • Easy installation with no-drilling or special hardware required
  • Attaches easily with 3M automotive-grade adhesive above the window
  • Made from durable, impact-resistant acrylic
  • Available in dark smoke and chrome finishes
See More

Auto Ventshade (AVS) – Ventvisor Window Visors: In-Channel Mount, Smoke, Front, 2 Pc (Part No.192099)

Ventvisor Window Visors: In-Channel Mount, Smoke, Front, 2 Pc

from

$49.99
AVS In-Channel Ventvisor® offers a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle. AVS; the creator of the side window deflector category, lets fresh air in while keeping rain out. The best exterior window protection with a large selection of window deflectors and for cars, trucks, SUV’s and CUV’s.

Product Features:
  • Precision engineered for a custom fit on your vehicle with modern, curved low-profile design
  • Installs in the window channel for a sleek, aerodynamic appearance
  • Made from durable, impact-resistant acrylic
  • Available in dark smoke finish
See More

TrailFX – Heavy-Duty Adjustable Ladder Rack for Full-Size Trucks (Part No.FCLR002B)

Heavy-Duty Adjustable Ladder Rack for Full-Size Trucks

from

$812.99
TrailFX(R) Contractor Racks are designed and manufactured with both functionality and durability as a top priority. These racks are fully adjustable and will fit full-size pickup trucks with either short or long beds.

Product Features:
  • Adds Convenience For Hauling Cumbersome Equipment Or Materials
  • Durable Steel Cleats Are Welded To Each Upright
  • Rear Cross Member Can Be Easily Removed To Accommodate Taller Items
  • Black Powder Coated Finish
  • No Drilling Required When Installed With Supplied J-Hooks
  • Adjustable To Fit Both Long And Shortbed Models
See More

TrailFX – Heavy Duty Adjustable Truck Ladder Rack with 1500 lb Capacity (Part No.FCLR001B)

Heavy Duty Adjustable Truck Ladder Rack with 1500 lb Capacity

from

$804.99
TrailFX Contractor Racks are designed and manufactured with functionality, adjustability, along with a heavy duty carrying capacity as top priority.

Product Features:
  • Adjustable To Fit Long And Short Bed With Regular, Extended Or Crew Cab Trucks: Fits All Fullsize Pickup Trucks
  • Rated To Support Up To 1,500 Pounds Loads
  • Rear Grab Handle Built In To Assist With Access Into Truck Bed Or Loading Tools On To Rack System
  • Rear Crossbar Easy To Remove If Needed For Tall Cargo
  • Rope Ties On Each Corner
  • Heavy Duty Steel Construction
  • Can Be Mounted Permanently Or Temporarily With No Drill J Hooks
  • No Drill Installation Provided
See More

WeatherTech – Cut-To-Fit, Deeply Sculpted Channels, Tan, Tpe, 2 Piece (Part No.W25TN)

Cut-To-Fit, Deeply Sculpted Channels, Tan, Tpe, 2 Piece

from

$71.99
All-Weather Floor Mats Are Custom, Flexible All Season Vehicle Floor Mats With Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. All-Weather Floor Mats Are Engineered To Prevent Curling And Cracking In Sub-Zero Weather. The WeatherTech All-Weather Floor Mats Have Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. Our All-Weather Floor Mats Are Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved, Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable All-Weather Floor Mats Are Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy. To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat. All-Weather Floor Mats Were Intended To Give The Best Possible Protection For Your vehicle Floor. Many Of Our Front And Rear Mat Applications Are Model Specific, While Others Are Assigned As The Best Possible Fit For Your Vehicle From Our Many Shapes And Sizes. Some Rear Mat Sizes Are Designed To Be Trimmed So That They May Be Customized To Fit Almost Any Vehicle.

Product Features:
  • Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand
  • Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable
  • Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy
  • All Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor
See More

WeatherTech – Direct-Fit, Deeply Sculpted Channels, Black, Tpe, 2 Piece (Part No.W14)

Direct-Fit, Deeply Sculpted Channels, Black, Tpe, 2 Piece

from

$74.99
The WeatherTech All Weather Floor Mats have deeply sculpted channels designed to trap water, road salt, mud and sand. Our proprietary engineered odorless resin ensures that these mats will not curl, crack or harden in sub zero weather. Our All Weather Floor Mats also have anti skid ridges to prevent shifting in your vehicle and come with a protective, non stick finish to make cleanup quick and easy. WeatherTech All Weather Floor Mats are manufactured in America to ISO 9001 standards, and also meet FMVSS302 standards your assurance of quality. Choose from Black, Tan or Grey to complement virtually any interior color. Available for cars, trucks, minivans and SUVs. All Weather Floor Mats were intended to give the best possible protection for your vehicle floor.

Product Features:
  • Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved
  • Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable
  • Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy
  • All Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor
See More

Dee Zee – Diesel, 108 Gallon Capacity, 48" W X 24" L X 24" H, Diamond Tread, Aluminum (Part No.DZ91753X)

Diesel, 108 Gallon Capacity, 48" W X 24" L X 24" H, Diamond Tread, Aluminum

from

$1438.99
Dee Zee Transfer Tanks – A safe and convenient means for transporting non-flammable liquids. Constructed of heavy gauge Brite-Tread aluminum. Radius curve design eliminates key weld pressure points. Tanks feature 3 stability baffles, lockable cap, 0.375 Inch drainage plug, and venting coupler. Tanks are intended for private use (non-commercial).

Product Features:
  • Specialty Series Transfer Tank
  • non Rusting 0.125 Inch Brite Tread Aluminum
  • Radius Curve Eliminates Weld Pressure Points
  • Includes Cap And Coupler For Venting
  • 3 Stability Baffles And Drain Plug
  • Mounting Tabs To Secure To The Truck Bed
See More

Dee Zee – Diesel,108 Gallon Capacity, Rectangle Shape, 24" L X 48" W X 24"H, Diamond Tread (Part No.DZ91753)

Diesel,108 Gallon Capacity, Rectangle Shape, 24" L X 48" W X 24"H, Diamond Tread

from

$1427.99
Dee Zee Transfer Tanks A safe and convenient means for transporting non flammable liquids. Constructed of heavy Gauge aluminum. Radius curve design eliminates key weld pressure points. Tanks feature 3 stability baffles, lockable cap, 3/8 Inch drainage plug and venting coupler. Tanks are intended for private use (non commercial).

Product Features:
  • Made From Non-Rusting Brite-Tread Aluminum
  • Perfect For Transporting Liquids
  • Radius Curve Design Eliminates Key Welded Pressure Points
  • Many Handy Styles To Fit Most Needs
See More

Rightline Gear – Full Size Long Bed Truck Tent (8′) (Part No.110710)

Full Size Long Bed Truck Tent (8')

from

$209.99
The Rightline Gear Truck Tent lets you experience camping in a dry truck bed, up off the ground, without the complication of tarps, stakes, and guy lines. It features a floorless design that allows you to set up or take down the tent without removing your gear from the bed. The tent is outfitted with (2) gear pockets, a lantern hanging hook, glow-in-the-dark zipper pulls, and a sky view vent. Measure the inside of your truck bed with the tailgate up and check the Truck Tent Sizing Guide. Turn any spot into a comfortable campsite!

Product Features:
  • Floorless design allows for set up without removing gear from the bed
  • Protective heavy duty straps and nylon buckles, won’t damage truck’s finish
  • Color coded poles and pole pockets for quick and easy set up
  • Water resistant fabric with tape sealed seams (PU 2000mm)
  • Sky view vent for more light, ventilation, and sleeping under the stars
  • All truck tents sleep (2) adults
  • Includes: tent, rainfly, stuff sack, and sewn-in set up guide
See More

Dee Zee – Chest, Single Lid, Black, Plastic, 35" L X 14" W X 13" H, 3.6 Cubic Ft Capacity (Part No.DZ6535P)

Chest, Single Lid, Black, Plastic, 35" L X 14" W X 13" H, 3.6 Cubic Ft Capacity

from

$151.99
You can never have enough rugged storage. Whether you are storing tools, hauling game day gear, or coming up with literally hundreds of other uses- Dee Zee universal poly plastic chest is like the Swiss Army Knife of utility chests. Constructed of strong yet lightweight plastic with a double wall lid, our universal utility chest can handle all the abuse you can throw at it. We have designed our utility chest to add quick, convenient storage for all sorts of applications. Available in two sizes to suit your needs. We even provided molded drink holders in case you decide to use it on the go and get a little thirsty. Do not worry if the weather does not cooperate, a foam gasket around the lid helps defend your items against the elements.

Product Features:
  • Classic Raised Brite Tread Pattern
  • Rigid Frame Resists Warping
  • Molded Locking Tabs
  • Poly Plastic Storage Chest Rigid Plastic Frame Resists Warping
  • Made In USA
See More

Dee Zee – Chest, Single Lid, Black, Plastic, 39" L X 27" W X 17" H, 10.35 Cubic Ft Capacity (Part No.DZ6537P)

Chest, Single Lid, Black, Plastic, 39" L X 27" W X 17" H, 10.35 Cubic Ft Capacity

from

$251.99
You can never have enough rugged storage. Whether you are storing tools, hauling game day gear, or coming up with literally hundreds of other uses- Dee Zee universal poly plastic chest is like the Swiss Army Knife of utility chests. Constructed of strong yet lightweight plastic with a double wall lid, our universal utility chest can handle all the abuse you can throw at it. We have designed our utility chest to add quick, convenient storage for all sorts of applications. Available in two sizes to suit your needs. We even provided molded drink holders in case you decide to use it on the go and get a little thirsty. Do not worry if the weather does not cooperate, a foam gasket around the lid helps defend your items against the elements.

Product Features:
  • Classic Raised Brite Tread Pattern
  • Convenient Molded Cup Holders
  • Molded Locking Tabs
  • Double Walled Lid
  • Double Wall Lid For Extra Support Classic Brite-Tread Pattern
  • Classic Brite-Tread Pattern
  • Made In USA
See More

Kat’s – Circulation Tank Heater; Thermostatically Controlled (Part No.13150)

Circulation Tank Heater; Thermostatically Controlled

from

$75.99
KATS was created and developed as a truly effective product for cold weather and hard starting problems. Owners and operators of diesel and gas operated equipment have long known that delayed starts and slow starts mean big money losses in labor, maintenance and operating revenue. KATS Circulation Tank Heaters are designed to do one thing – Start engines FAST! KATS Circulation Tank Heaters are truly superior heavy duty patented products. This heater is thermostatically controlled 135-175 degrees. Our components are 100% made in the USA. Customers will find KATS Circulation Tank Heaters are unbeatable in pricing, quality and performance anywhere. KAT’S manufacturing quality control procedures assure you the very best anytime you install and operate a KAT’s system.

Product Features:
  • Available for all size engines
  • Equipped with check valve
  • Fits most liquid cooled engines
  • Installations easier and simpler
  • New lower radiator hose connectors
See More

Kat’s – Freeze Plug Heater (Part No.11607)

Freeze Plug Heater

from

$35.99
Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:
  • Saves wear and tear on your engine
  • Simple installation directly into engine block
See More

Stampede – Vigilante Premium, Hood Shields, Flag W/Eagle, High Profile, 1 Pc (Part No.301-30)

Vigilante Premium, Hood Shields, Flag W/Eagle, High Profile, 1 Pc

from

$178.99
Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.

Product Features:
  • Maximum protection to your hood to complement the look of your vehicle
  • Precision engineered for a perfect fit to your vehicle
  • Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
  • Available in smoke, chrome, American flag and camo finishes
  • UV and scratch-resistant while being car-wash safe
See More

Stampede – Vigilante Premium, Hood Shields, Smoke, High Profile, 1 Pc (Part No.301-2)

Vigilante Premium, Hood Shields, Smoke, High Profile, 1 Pc

from

$62.99
Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.

Product Features:
  • Maximum protection to your hood to complement the look of your vehicle
  • Precision engineered for a perfect fit to your vehicle
  • Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
  • Available in smoke, chrome, American flag and camo finishes
  • UV and scratch-resistant while being car-wash safe
See More

Dee Zee – For Use With Dee Zee Bull Bars, Black, Steel (Part No.DZLPMOUNT)

For Use With Dee Zee Bull Bars, Black, Steel

from

$15.49
Dee Zee Bull Bar Guard License Plate Mount. Bull bars can block the license plate on some vehicles, use this bracket to move your license plate to a visible location.

Product Features:
  • License Plate Frame Mount
  • Made From 2.5 Millimeter Hot Rolled Steel
  • Protective Gloss Black Powder Coat Finish
  • Attach A License Plate To Your Dee Zee Bull Bar
  • Mounts To Underside Of The Center Tube
  • Uses 6 Millimeter Threaded Inserts
See More

WeatherTech – Aerodynamic Design, In-Channel, Dark Smoke, Acrylic, Set Of 2 (Part No.80019)

Aerodynamic Design, In-Channel, Dark Smoke, Acrylic, Set Of 2

from

$84.99
WeatherTech Side Window Deflectors, offer fresh air enjoyment with an original equipment look, installing within the window channel. They are crafted from the finest 3 Millimeter acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors are precision machined to perfectly fit your vehicle s window channel. These low profile window deflectors help to reduce wind noise and allow interior heat to escape. Our light tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. approved glazing material. Available in light and dark tint for most vehicles.

Product Features:
  • Offers Maximum Fresh Air Enjoyment
  • Optically Transparent: OEM Quality
  • Sleek Aerodynamic Styling
  • Reduced Wind Noise
  • No Unsightly Exterior Tape
  • Minimizes Interior Heat When Parked Helps Keep Side Windows Dry In The Rain
  • Precision Machined To Perfectly Fit Your Vehicle
  • Installed Inside The Window Channel
See More

AutoCraft – Truck Cover, Blue 3 Layers, Fits Trucks 17.5′-19′, Medium-Duty, Water Resistant, Outdoor Use (Part No.AC4711)

Truck Cover, Blue 3 Layers, Fits Trucks 17.5'-19', Medium-Duty, Water Resistant, Outdoor Use

from

$99.99
Autocraft Easy Fit truck cover offers excellent protection for your vehicles. 3 layers construction includes reflective UV resistant layer, water resistant layer and non-abrasive soft inside layer. The construction does not only prevent your vehicles from scratching but also protects against mold and mildew. Suitable for indoor and outdoor use. It designed with a full elastic, ultrasonic sewn hem and reinforced grommets to ensure a better fit and extreme durability. Bag included for convient storage.

Product Features:
  • Fit trucks 17.5′-19′ (5.3m-5.8m)
  • Medium weight, breathable, non-abrasive fabric for indoor and outdoor use
  • Water resistant layer, protects against mold and mildew
  • UV treatment protects vehicle from sun damage
  • Full elastic and ultrasonic sewn hem to ensure a better fit and extreme durability
  • 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
  • Antenna hole patch included to provide additional protection from water or dust soaking into the hole that you cut for antenna
  • Bag included for easy storage
See More

AutoCraft – Truck Cover, Grey, Fits Trucks 17.5′-19′, Breathable, Non-Abrasive, Dustproof (Part No.AC79)

Truck Cover, Grey, Fits Trucks 17.5'-19', Breathable, Non-Abrasive, Dustproof

from

$79.99
Autocraft Easy Fit Truck Cover offers superior protection against dirt, dust, rain and snow. Protects against acid rain, pollution and color fading UV rays. Durable, reinforced seams and elastic hems. Convenient storage bag included.

Product Features:
  • Lightweight, breathable, non-abrasive fabric
  • Water resistant, protects against mold and mildew
  • Full elastic hem with reinforced grommets
  • Full elastic and double stitched hem to ensure a better fit
  • 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
  • Antenna hole patch included to to provide additional protection from water or dust soak into the hole that you cut for antenna.
See More

Search Over 3,286 Chevrolet R3500 Parts Online for Delivery or Pick Up

Looking for the best Chevrolet R3500 aftermarket replacement parts? Replacing worn and broken parts on your Chevrolet R3500? Check out our online catalog to find the best selection of aftermarket Chevrolet R3500 parts as well as real user reviews on Chevrolet R3500 replacement parts. Make an informed decision about every component you add to your R3500.

At Advance Auto, we’ve got you covered when it comes to getting your Chevrolet R3500 in tip top condition. We’ve got over 3,286 Chevrolet R3500 parts to choose from in popular categories like Body Parts, Marine and RV Parts and Transmission Parts. If you’re looking for the best prices, try searching our Chevrolet R3500 parts catalog to compare OEM and aftermarket parts for your Chevrolet R3500.

Whether you need Chevrolet R3500 body parts, interior components, or custom Chevrolet R3500 parts you can find them online at Advance Auto. Want to order your Clutch Systems online? Or maybe you need your Chevrolet Automotive Accessories same day? No problem, you can pick up R3500 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Chevrolet R3500 parts has never been easier.