Chevrolet R3500 Valve Cover and Cylinder Heads

Your One-Stop Shop For Trusted Chevrolet R3500 Valve Cover and Cylinder Heads

If you’re in search of Chevrolet R3500 Valve Cover and Cylinder Heads aftermarket or OEM parts, consider your search over! Advance Auto Parts carries 210 Valve Cover and Cylinder Heads from top brands with prices ranging from $0.30 to $2,726.00.

Beyond great prices, we stock trusted brands manufacturing all types of Valve Cover and Cylinder Heads for your Chevrolet R3500.

And don’t forget to read customer reviews across all Valve Cover and Cylinder Heads categories in our catalog. Buy with confidence by leveraging past customer experiences of our aftermarket and OEM parts.

At Advance Auto Parts, we don’t think top quality Valve Cover and Cylinder Heads have to cost top dollar, and we prove it. Browse our top Chevrolet R3500 Valve Cover and Cylinder Heads below, order online to ship to your home, or head into your nearest Advance Auto Parts location to get started.

Please Select your Vehicle to See Exact Fit Parts

Essential Chevrolet R3500 Valve Cover and Cylinder Heads

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4377)

Cylinder Head Dowel Pins

from

$20.99
Big Block Chevrolet tubular head dowel, .638/.639 inch o.d. (outer diameter) by 1/2 inch. Packaged two per set. These hard to find dowel pins are precision machined then case hardened for accurate alignment in engine assembly.

Product Features:
  • Precision Machined
  • Case Hardened
  • Give Accurate Alignment
  • 2 Per Set
See More
View Product

Melling Select Performance – Valve Train Set Up Spring (Part No.VTSS100)

Valve Train Set Up Spring

from

$12.99
Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.
See More
View Product

Holley – M/T Valve Covers – Vintage Style – Finned – BBC – Polished (Part No.241-84)

M/T Valve Covers - Vintage Style - Finned - BBC - Polished

from

$393.99
Product Features:
  • Precision manufactured with knock-out plugs for stock PCV (smog Control) and oil fill installations
  • Cast aluminum construction for even gasket sealing
  • Top cover surface may be used for engraving your name horizontally
  • Deep heat dissipating fins
  • Polished aluminum finish
See More
View Product

Sealed Power – Engine Rocker Arm Kit (Part No.R-973)

Engine Rocker Arm Kit

from

$6.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Complete rocker arm assembly
  • 1 Arm
  • 1 Ball
  • 1 Nut
  • Utilizes ISO & QS certified manufacturing
See More
View Product

Edelbrock – Pushrod Set for S/B Chevy (Part No.9629)

Pushrod Set for S/B Chevy

from

$197.99


Product Features:
  • Case-Hardened Tubing
  • Surface Hardening
  • Welded Ends
  • 0.3125 in. Diameter
  • Use with or without Hardened Steel Guideplates
See More
View Product

Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)

Engine Rocker Arm Ball

from

$0.65
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
View Product

Sealed Power – Engine Valve Lifter (Part No.HT-817R)

Engine Valve Lifter

from

$11.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:
  • Retro-fit performance
  • High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
  • Eliminates frequent lash adjustments
  • Significant friction reduction substantially increases horsepower and fuel economy
  • Delivers quieter engine operation
  • Application-specific design for perfect fit and correct operation
See More
View Product

Edelbrock – RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Flat Tappet Cam (Part No.60459)

RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Flat Tappet Cam

from

$1296.00
Product Features:
  • Out-of-the-Box Bolt-On Performance
  • Designed For Street/High Performance Big Blocks
  • Specially Designed Oval Ports
  • Highly Efficient Semi-Open Style Chamber
  • High Velocity Short Intake Ports
  • Fit GM Mark IV; Gen V; and Gen VI Blocks
  • Complete Head with 2.19 (i) ; 1.88 (e) Valves
  • Also Available in Polished Finish; See PN[604519]
See More
View Product

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Chevrolet (Part No.7376)

Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Chevrolet

from

$212.99
The Edelbrock No. 7376 head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit and sealing properties when used with Edelbrock aluminum cylinder heads. Edelbrock head gaskets are manufactured from high-density materials and feature a superior design that performs under pressure and provides a long-lasting seal, without re-torqueing.
See More
View Product

Edelbrock – Hold-Down Tab Kits for Big-Block Chevy 5" long (Qty 7) (Part No.4414)

Hold-Down Tab Kits for Big-Block Chevy 5" long (Qty 7)

from

$29.99
The Edelbrock #4414 valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve covers, our Elite Series and Elite II valve covers, our Classic Series valve covers and our Victor Series valve covers.

Product Features:
  • Not For Center Bolt Covers
  • Steel Material
  • For Big-Block Chevy
  • Chrome Finish
  • Set of 7
See More
View Product

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

ARP Cylinder Head Stud Kit

from

$321.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. 

Product Features:
  • 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • Small Block Chevy
  • Sold As A Kit
See More
View Product

Edelbrock – Valve Seat for B/B Chevy heads with 2.19" Valves (Part No.9716)

Valve Seat for B/B Chevy heads with 2.19" Valves

from

$24.99
Product Features:
  • 2.19 in.
  • Ductile Iron Material
  • Intake
  • Sold Individually
  • Made In The USA
See More
View Product

Edelbrock – Sure Seat Valve Springs for Cylinder Heads (Part No.5745)

Sure Seat Valve Springs for Cylinder Heads

from

$190.99
Product Features:
  • Non-Rotator Type
  • 1.550 in. Outer Diameter
  • 0.805 in. Inner Diameter
  • Dual Coil Spring Type
  • Set of 16
See More
View Product

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9730)

Performer Series Retainer (Qty 16)

from

$104.99
Product Features:
  • Use W/ Valve Springs Part #5703, 5794
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More
View Product

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-10319-00)

Engine Cylinder Head Gasket

from

$41.99
Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Composite construction
  • Clear silicone top coat for cold sealability
  • Dana engineering-approved for fit, form and function
See More
View Product

ARP Auto Racing – Hex Style Head, 1.8L Lb Per Square" Tensile Strength, Black Oxide, Chrome Moly (Part No.135-3601)

Hex Style Head, 1.8L Lb Per Square" Tensile Strength, Black Oxide, Chrome Moly

from

$136.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:
  • High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
  • Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
  • Rated At 180,000 PSI Tensile Strength
  • High Performance Head Bolts Are Stronger
See More
View Product

Competition Cams – SUPER VALVE LOCKS, 3/8" 1 ST (Part No.612-16)

SUPER VALVE LOCKS, 3/8" 1 ST

from

$479.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:
  • For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
  • Super Locks are recommended in all race applications
See More
View Product

Dorman – Lock Nut, Type 8, 7/16-20 In., GM (sold by each) (Part No.693-022)

Lock Nut, Type 8, 7/16-20 In., GM (sold by each)

from

$3.99
This engine rocker arm nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine rocker arm nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More
View Product

Sealed Power – Engine Intake Valve (Part No.V-1926)

Engine Intake Valve

from

$4.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Chrome plated stem
  • Hard coating added to surface for strength & aiding in lubrication
  • Note – coating added in varying thicknesses depending on application
  • Innovative design, using leading edge materials
  • Utilizes ISO & QS certified manufacturing
See More
View Product

ARP Auto Racing – 1.9"Oal Stud, 0.75"D Adjuster Thread, 7/16"-20, 3/8"-16, 0.75"D Screw-In (Part No.135-7102)

1.9"Oal Stud, 0.75"D Adjuster Thread, 7/16"-20, 3/8"-16, 0.75"D Screw-In

from

$104.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

Product Features:
  • Made Of 8740 Chrome Moly Forgings
  • Heat Treated To 180,000 Psi
  • Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
  • Lengths Are Exact Designed To Provide Positive Seating Every Time
  • 1.9″ Effective Stud Length
  • Set of 16
  • .800″ Adjuster Thread Length
  • 7/16″-20 Shank Diameter and Thread
See More
View Product

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

Ultra Seal: Competition Screw-In Rocker Arm Studs

from

$109.99
Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:
  • Black Oxide Coated Grade 8 Steel
  • Kit Contains 16 Studs
  • Easy To Install
  • Heat Treated Steel
  • Prevents Stud Flexing
  • Black Plated Finish
See More
View Product

Spectre – Centerbolt T-Bars (Part No.5288)

Centerbolt T-Bars

from

$12.99
Spectre’s Valve Cover Hold Downs feature high quality steel construction with a triple chrome-plated finish. Manufactured for a universal fit, this product’s T-bar heads allow for easy tightening without tools. Sold 4 per package, these studs are intended to fit standard height Chevy Centerbolt valve covers.

Product Features:
  • 4 bolts included in each package
  • T-bar head design
  • Triple chrome-plated finish
  • Fits standard height Chevy Center bolt valve covers
See More

(1 reviews)
View Product

Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)

Chrome Valve Cover Wing Bolts

from

$18.99
Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features:
  • Fits Chevy V8
  • Standard Y Top 1/4 In-20 X 5/8 in L
  • Chrome Plated Steel
  • Overall Length: 4.64″
  • Installed Length: 4.00″
  • Pack of 4
See More

(9 reviews)
View Product

Valve Cover and Cylinder Heads Brands You Can Trust For Your Chevrolet R3500

13 trusted brands of Valve Cover and Cylinder Heads line our shelves, ready to help keep your Chevrolet R3500 running smooth. Below are some of the most popular brands and their top Valve Cover and Cylinder Heads offerings:

Popular Sealed Power Valve Cover and Cylinder Heads

Sealed Power products for the Chevrolet R3500 span several categories. Some of the highest-rated Sealed Power Valve Cover and Cylinder Heads that will fit your Chevrolet R3500 are:
Engine Valve Spring Retainer Keeper
from $0.43
(2)
Engine Valve Spring Retainer Keeper
Engine Valve Locks
Engine Valve Spring
from $2.49
(1)
Engine Valve Spring
Engine Valve Springs
Engine Push Rod
from $3.29
(5)
Engine Push Rod
Push Rods

Most Purchased Chevrolet R3500 Valve Cover and Cylinder Heads from Felpro

When you buy the most frequently purchased Felpro brand Valve Cover and Cylinder Heads, you can be confident it will be the right part for your Chevrolet R3500. Here are the Felpro Valve Cover and Cylinder Heads Advanced Auto customers buy the most:
Engine Cylinder Head Bolt Set
from $32.99
(38)
Engine Cylinder Head Bolt Set
Cylinder Head Bolt Sets
PermaTorque Engine Cylinder Head Gasket Set
from $73.99
(19)
PermaTorque Engine Cylinder Head Gasket Set
Cylinder Head Gasket Sets
PermaTorque Engine Cylinder Head Gasket
from $35.99
(12)
PermaTorque Engine Cylinder Head Gasket
Cylinder Head Gaskets

FAQs for Chevrolet R3500 Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the Chevrolet R3500?

Out of 210 Valve Cover and Cylinder Heads for the Chevrolet R3500, the most popular in our inventory are:
Engine Valve Lifter
from $21.99
This product is not rated
Engine Valve Lifter
Engine Valve Lifters
Engine Valve Lifter
from $11.99
This product is not rated
Engine Valve Lifter
Engine Valve Lifters
Chrome Valve Cover Wing Bolts
from $18.99
(9)
Chrome Valve Cover Wing Bolts
Valve Cover Bolts

What are the top-rated Chevrolet R3500 Valve Cover and Cylinder Heads?

Top-rated Valve Cover and Cylinder Heads for your Chevrolet R3500 based on customer reviews/ratings are:
CYLINDER HEAD BOLT SET
from $47.99
(4)
CYLINDER HEAD BOLT SET
“A”
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
from $64.99
(2)
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
“Used with the smallest Comp Thumpr Cam, good to 5500 RPM, Cost is great, No valve float. I would use again with a samll to medium cam and 416 heads.”
RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Roller Cam
from $1285.00
(2)
RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Roller Cam
“Replaced all 3 of the U joints in the front driveshaft.”

More Popular Parts for All Makes