Chevrolet Malibu Brake Parts

This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
• Quality design – inner cables are sheathed and lubricated to provide improved durability
• Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
• Tough materials – zinc-plated fittings prevent corrosion

This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:

• Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
• Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
• Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
• Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

Carquest Premium Coated Caliper Brackets are engineered and manufactured to meet or exceed OEM performance specifications for strength and durability. Complete inspection of all critical dimensions and bolt threads for a perfect fit and easy installation. OE style rust protective coatings ensure worry-free performance for miles top come.

Product Features:

• Meets or exceeds OE performance specifications
• Application-specific brackets for perfect fit and easy installation
• OE style rust protection extends product life
• Grease pack is included for easy installation

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

• Each unit is 100% new, providing consistent performance when servicing your brake system
• Easy to transfer for on-the-spot master cylinder bleeding
• Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
• Easy to clean to ensure no cross contamination
• Durability for long lasting performance

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit with Powder Coated Calipers comes with everything you need, from pads, rotors, calipers and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. The Powder Coated Calipers not only protect against corrosion, but also really stand out behind your wheels! Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit with Calipers.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• All calipers are powder coated, assembled, and tested in our Chicago, IL facility
• Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Buy with confidence from the originator & industry leader of brake kits

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Buy with confidence from the originator & industry leader of brake kits

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Maintains proper movement for safe, effective stopping performance
• Prevents noise and premature wear

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

• Constructed of high-quality materials for long-lasting durability
• Many different styles are available, including threaded and wide panel
• Packaged in a variety of piece counts for use with both small and large projects
• Also suitable for a broad range of industrial and commercial uses

Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:

• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
• 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
• New bleeder screws, banjo bolts, and crush washers included for a complete repair
• OE Style, stainless steel pad abutment hardware included
• 100% end-of-line inspection and pressure testing ensures quality and performance
• Caliper finish or coating may vary

This spindle lock nut kit includes a new spindle nut and the necessary hardware designed to match the factory equipment.

Product Features:

• Direct replacement – this spindle lock nut kit includes a nut and related, necessary hardware for servicing specific vehicles
• Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to wear
• Durable construction – kit components are manufactured to precise specifications to ensure proper fit and reliable service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

An ACDelco GM Original Equipment Brake Light Switch is a GM-recommended replacement for your vehicle’s original component. It is electrically powered and causes the brake lights to engage when the brakes are applied. This original equipment brake light switch has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Work with vehicle electronics to help optimize vehicle capabilities
• Variety of switches, including: door lock, turn signal, ignition, trunk, and windshield wiper switches all engineered to meet GM specific designs for fit, form, and function
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance.

Product Features:

• Manufactured to restrain high tolerances with quality materials
• Increases the Life Span and Improves the Performance of the Drum Brakes
• Coated to eliminate heat and corrosion deterioration
• Restores brakes to like-new performance
• This part matches Original Equipment (OE) quality specifications

Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to preventing warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Product Features:

• Made in the USA
• OE Manufacturer
• Ceramic Brake Pad
• Low Dust
• Powerful Quiet Stopping
• Ultra-Premium
• Perfect Upgrade for all Braking Systems

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• Our Canister Purge valves meet or exceed original equipment specifications, providing confidence in every box
• Featuring industrial grade materials for robust performance
• Decades of industry leading research and development focused on meeting the technician’s needs
• With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

Protect the braking system from debris and corrosive weather conditions with this rust-resistant replacement brake dust shield. Dimensional verification and salt spray testing ensures proper fit and extended service life.

Product Features:

• Effective replacement – designed to match the fit and function of the stock brake dust shield on specific vehicle applications
• Longer service life – corrosion-resistant steel construction protects brakes from elements and debris
• Ideal fix – directly replaces highly deterioration-prone original part
• Precision-engineered – has undergone dimensional verification and salt spray testing to ensure quality

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance.

Product Features:

• Manufactured to restrain high tolerances with quality materials
• Increases the Life Span and Improves the Performance of the Drum Brakes
• Coated to eliminate heat and corrosion deterioration
• Restores brakes to like-new performance
• This part matches Original Equipment (OE) quality specifications

Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Proper harmonic design and balance helps to reduce brake noise and vibration
• Optimal metallurgy and casting thickness to preventing warping

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Fast and efficient replacement
• Eliminates heat and corrosion deterioration

Hardware consists of a variety of parts designed to assist in restoring your brake system to Like New Performance. Caliper anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Exact fitment and original replacement
• New Brake Hardware prevents noise and premature wear
• Helps deliver a quieter, more efficient braking system

PowerStop Performance Brake Calipers are made specifically with the enthusiast in mind. These calipers bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are remanufactured in our Chicago, IL facility and treated with a electrostatic high-temperature red powder-coating. The easy to clean powder coating helps to resist rust and corrosion thus extending the life of your calipers. PowerStop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. PowerStop caliper pairs are expertly assembled using new seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. The performance color is a nice touch that really stands out behind your wheels!

Product Features:

• All calipers are thoroughly inspected for quality and safety. Pressure tested to prevent leaks.
• New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets
• High temperature EPDM rubber for extended life.
• Premium silicone lubrication provides smoother operation.
• The easy to clean powder coating helps to resist rust and corrosion and extends the life of calipers.

The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Mounting Bolts sets provide direct replacement for a proper fit every time. Our durable steel design helps to install the tool easily.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Manufactured with quality materials to suppress high stress levels
• Prevents noise and premature wear
• Corrosion resistant coating for long-lasting durability against harsh roads
• Finished off with thread locker for extra security