Chevrolet HHR Brake Parts

Carquest Professional coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Professional coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Professional coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.

Product Features:

• corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Professional coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increas
• long-lasting performance.
• Manufactured to exacting quality and dimensional specifications for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• OE configuration to dissipate heat, increasing pad life
• Proper harmonic design helps to reduce brake noise
• Non-directional finish for decreased break-in time and reduced brake noise
• Brand may vary by location

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

• Each unit is 100% new, providing consistent performance when servicing your brake system
• Easy to transfer for on-the-spot master cylinder bleeding
• Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
• Easy to clean to ensure no cross contamination
• Durability for long lasting performance

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Mounting Bolts sets provide direct replacement for a proper fit every time. Our durable steel design helps to install the tool easily.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Manufactured with quality materials to suppress high stress levels
• Prevents noise and premature wear
• Corrosion resistant coating for long-lasting durability against harsh roads
• Finished off with thread locker for extra security

Wearever Calipers feature steel pistons that are less likely to crack or deform under extreme pressure. Expertly remanufactured to rigorous quality and performance standards, they are are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.

Product Features:

• Steel pistons are durable, not prone to cracking and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Mounting bracket is included where applicable for a hassle-free installation.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New washers are included where applicable for a proper seal.
• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• New stainless steel hardware clips and new mounting pins are included where applicable.

Parking Brake Switch

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Maintains proper movement for safe, effective stopping performance
• Prevents noise and premature wear

Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to preventing warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time.

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Drum Upgrade Kit comes with everything you need, from pads, two rotors, a set of brake drums and brake shoes, plus the hardware necessary for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. The Evolution premium coated brake drums come with brake shoes, a spring/hold-down kit and adjusters. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Drum Upgrade Kit.

Product Features:

• This complete front and rear kit includes front drilled & slotted rotors with Z23 brake pads along with silver painted rear drums with brake shoes and hold down hardware.
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• Drilled & Slotted performance rotors provide maximum cooling
• Premium drums are coated in a silver rust preventative paint that is oven cured so it keeps looking good despite high temperatures
• Premium shoes are made from 100% new steel, plus are cam ground and chamfered to ensure precise fit and noise-free operation
• Comes with everything you need to get the job done, including stainless-steel pad installation hardware, shoe installation hardware, adjuster kits and high-temperature ceramic brake lubricant
• Brand new shoe hold-down hardware ensures that you don’t have to deal with the old worn out/broken springs, pins or cups.
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Buy with confidence from the originator & industry leader of brake kits

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Carquest Premium Coated Caliper Brackets are engineered and manufactured to meet or exceed OEM performance specifications for strength and durability. Complete inspection of all critical dimensions and bolt threads for a perfect fit and easy installation. OE style rust protective coatings ensure worry-free performance for miles top come.

Product Features:

• Meets or exceeds OE performance specifications
• Application-specific brackets for perfect fit and easy installation
• OE style rust protection extends product life
• Grease pack is included for easy installation

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit with Powder Coated Calipers is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors, calipers and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. The Powder Coated Calipers not only protect against corrosion, but also really stand out behind your wheels! This PowerStop Z26 Street Warrior Brake Upgrade Kit with Powder Coated Calipers is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.

Product Features:

• This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
• Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
• All calipers are powder coated, assembled, and tested in our Chicago, IL facility
• Stainless-steel pad shims resist the increased temperatures common on high performance applications
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Drilled & Slotted performance rotors provide maximum cooling
• Bolt-on upgrade for stock brakes, no modifications necessary
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Rotors are zinc plated for maximum protection against rust.
• Buy with confidence from the originator & industry leader of brake kits

This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:

• Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
• Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
• 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
• Strict specifications – made to meet rigorous SAE International standards

Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:

• All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
• Key components like spring are from high and stable quality suppliers.
• Products are machined by CNC machines with strictly quality control.
• Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
• Manufactured to strict engineering quality standards, meets S.A.E. specifications
• Each product is 100% tested on production lines and sampling tested prior to shipment
• Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
• Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
• Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• Points feature one-piece nylon breaker arms where specified providing longer tune-up life
• Featuring brass or copper contacts where specified for extended wear
• All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Contains all the necessary hardware for easy installation
• Manufactured to restrain high tolerances with quality materials
• Helps deliver a quieter, more efficient braking system
• Restores brakes to like-new performance
• Corrosion resistant coating for long-lasting durability against harsh roads

ACDelco Professional Temperature Control Relay is a high quality aftermarket replacement component for one or more of the following vehicle systems: HVAC. This premium aftermarket relay is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• All units are 100% tested to ensure reliable performance.
• Guaranteed fit and function.

Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:

• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
• 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
• New bleeder screws, banjo bolts, and crush washers included for a complete repair
• OE Style, stainless steel pad abutment hardware included
• 100% end-of-line inspection and pressure testing ensures quality and performance
• Caliper finish or coating may vary

CARQUEST Wearever Brake Drums are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and balance that eliminates noise and enhances pedal feel. CARQUEST Wearever Brake Drums are designed to dissipate heat helping to eliminate brake fade and increase the life of your brake shoes. Ready to install out of the box to save you time.

Product Features:

• Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• OE design to dissipate heat, increasing brake shoe life
• Proper harmonic design and balance helps to reduce brake noise
• Optimal metallurgy and casting thickness to preventing warping
• Ready for immediate “out-of-the-box” installation (after cleaning)
• Advance Auto Parts Drum Tips: Recommended using Wearever Brake Clean to remove residual manufacturing oils prior to installation
• Always use a torque wrench to tighten wheel bolts to the manufacturers” specifications to prevent pedal pulsation
• Always replace drums in pairs to improve stopping power

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

• Direct-fit OE replacement ensures ease of installation
• Designed to meet OE performance
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance.

Product Features:

• Manufactured to restrain high tolerances with quality materials
• Increases the Life Span and Improves the Performance of the Drum Brakes
• Coated to eliminate heat and corrosion deterioration
• Restores brakes to like-new performance
• This part matches Original Equipment (OE) quality specifications

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

• Wearever Brake Shoes come bonded or riveted based on OE design. 
• Wearever Brake Shoes are coated to prevent rust.
• Wearever Brake Shoes are 100% New not remanufactured.
• Brand may vary by location

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Increases the life span of the brake pads
• Restores brakes to like-new performance
• Prevents noise and premature wear
• Direct replacement for a proper fit