from

$7.99

This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$279.99

If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Product Features:

Speedometer correction for multiple tire sizes
Adjustable tire size/gear ratio change
Return back to factory settings
Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
Internet updateable

from

$135.99

Made In USA. Builders have found an issue when assembling the GM LS engines timing sets. Improper installation of the camshaft sprockets or phasers can damage or push the locating pin back into the camshaft during installation. As a result Melling has released the CSIT-LS installation tool which is designed to aid in the installation of both the camshaft and the camshaft sprocket or phaser. The CSIT-LS can be used with both single bolt and 3-bolt cams. The CSIT-LS installation tool is made from alloyed tool steel and heat treated for durability.

from

$198.99

Yukon multi-shim driver. This shim driver tool works on a variety of applications including: – GM 7.5″, 8.2″, 8.5″, 8.6″, 12P, 12T, – Ford 7.5″, 8.8″, 9.75″, 10.25″, 10.5″, – Model 35, Dana 44HD, Dana 44 JK, and more! No return.

Product Features:

Carrier Multi-shim driver
Allows for easier carrier shim installation without damaging carrier shims

from

$3.49

Ensure proper alignment during clutch installations and service with this convenient clutch alignment tool. Made of quality materials for long and reliable service life.

Product Features:

Convenient solution – ensure proper alignment during clutch installations and service with this handy alignment tool.
Restores functionality – do the job right the first time with the right tool
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$106.99

When replacing the rear main seal cover on specified vehicle applications, this must-have tool ensures the cover is properly aligned on the crankshaft to prevent damage and leaks. Made of steel, it’s finished with zinc plating for durability.

Product Features:

Ideal solution – this must-have rear main seal cover installation tool ensures the cover is properly aligned on the crankshaft.
Application specific – engineered for a proper repair on specified applications.
Convenient and valuable – helps ensure alignment to prevent damage and leaks
Durable construction – machined from low-carbon steel, zinc-plated and clear-chromate-coated for durability

from

$27.99

This brake bleeder screw assortment is designed to match the fit and function of the original hardware. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake bleeder screw assortment is designed to match the performance and function of the original hardware.
Ideal solution – the brake bleeder screws in this assortment are precision-engineered for an exact fit
Durable construction – made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$48.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$44.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$168.89

Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).

Product Features:

Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
Controls Engines Air/Fuel Ratio
Controls Spark Advance For Max Power
Potential Gas Mileage Improvements
No Wiring Or Soldering Required
Installs In Less Than 30 Minutes
Product might not be available in all states due to local laws.

from

$242.89

Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.

Product Features:

Designed For Daily Street Driving
For Unmodified Vehicles w/Stock Thermostat
Controls Engines Air/Fuel Ratio
Controls Spark Advance For Max Power
Potential Gas Mileage Improvements
No Wiring Or Soldering Required
Installs In Less Than 30 Minutes

from

$252.89

Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).

Product Features:

Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
Controls Engines Air/Fuel Ratio
Controls Spark Advance For Max Power
Potential Gas Mileage Improvements
No Wiring Or Soldering Required
Installs In Less Than 30 Minutes
Product might not be available in all states due to local laws.

from

$11.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$709.99

Differential Housing Spreader for Dana 30, 44, 60, 61, 70, and 80. The Yukon Differential Housing Spreader allow you to safely & easily set carrier bearing preload, saving time and money. No return. This tool is not compatible with Corvette housings.

Product Features:

Housing spreader
Works on Dana 30, 44, 60, 70 and 80 applications
Allows for proper carrier bearing preload to be set

from

$95.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$127.99

Made In USA. Melling suggests that a new properly installed oil pump pick-up tube or screen be a part of every oil pump installation. Melling oil pump screen installation tools provide an easy method for installing a press fit oil pump screen into the oil pump correctly without damaging the oil pump screen tube. Melling oil pump screen installation tools are precision manufactured from high quality materials for worry free performance every time. Melling offers oil pump screen installation tools for both 5/8 inch and 3/4 inch diameter tubes.

Product Features:

Screen installation tool allows for installing press-in type oil pump screen assembly safely
Manufactured from high quality materials for consistent durability
For use with 3/4 In. diameter tubes
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance

from

$108.99

Made In USA. Melling suggests that a new properly installed oil pump pick-up tube or screen be a part of every oil pump installation. Melling oil pump screen installation tools provide an easy method for installing a press fit oil pump screen into the oil pump correctly without damaging the oil pump screen tube. Melling oil pump screen installation tools are precision manufactured from high quality materials for worry free performance every time. Melling offers oil pump screen installation tools for both 5/8 inch and 3/4 inch diameter tubes.

Product Features:

Screen installation tool allows for installing press-in type oil pump screen assembly safely
Manufactured from high quality materials for consistent durability
For use with 5/8 In. diameter tubes
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance