1990 Chevrolet Corvette Tools
More 1990 Chevrolet Corvette Tools Categories
If you’re looking for an original Tools replacement for a 1990 Chevrolet Corvette, you can search through our selection below. You’ll also find aftermarket and OEM Tools to meet your needs.
Essential 1990 Chevrolet Corvette Tools
Yukon Gear – Differential Housing Spreader For Dana Housings (Part No.56035)
from
$709.99
Differential Housing Spreader for Dana 30, 44, 60, 61, 70, and 80. The Yukon Differential Housing Spreader allow you to safely & easily set carrier bearing preload, saving time and money. No return. This tool is not compatible with Corvette housings.
Product Features:
See More
Product Features:
- Housing spreader
- Works on Dana 30, 44, 60, 70 and 80 applications
- Allows for proper carrier bearing preload to be set
Yukon Gear – Yoke Holder Tool (Part No.56066)
from
$159.99
Yoke holder tool, fits most yokes. 1310/1330/1350/1410/7260/7290/MR3/Toyota. No return.
Product Features:
See More
Product Features:
- Yoke holder tool
- Firmly holds pinion yoke in place allowing for easier pinion preload setting
Yukon Gear – Multi-Shim Driver (Part No.56077)
from
$198.99
Yukon multi-shim driver. This shim driver tool works on a variety of applications including: – GM 7.5″, 8.2″, 8.5″, 8.6″, 12P, 12T, – Ford 7.5″, 8.8″, 9.75″, 10.25″, 10.5″, – Model 35, Dana 44HD, Dana 44 JK, and more! No return.
Product Features:
See More
Product Features:
- Carrier Multi-shim driver
- Allows for easier carrier shim installation without damaging carrier shims
Hypertech – ThermoMaster Power Computer Chip, with Overdrive (Part No.158332)
from
$252.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
Hypertech – Street Runner Power Computer Chip (Part No.120391)
from
$242.89
Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.
Product Features:
See More
Product Features:
- Designed For Daily Street Driving
- For Unmodified Vehicles w/Stock Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
- Product might not be available in all states due to local laws.
Hypertech – ThermoMaster Power Computer Chip (Part No.154372)
from
$168.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
Hypertech – Street Runner Power Chip (Part No.156301)
from
$242.89
Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.
Product Features:
See More
Product Features:
- Designed For Daily Street Driving
- For Unmodified Vehicles w/Stock Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
Hypertech – ThermoMaster Power Chip (Part No.158372)
from
$252.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
Hypertech – ThermoMaster Power Computer Chip (Part No.159372)
from
$252.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$40.99
Brake Bleeder Screws
Dorman – Help – Bleeder Screws 5/16-24 X 1 In. (Part No.13903)
from
$6.49
This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Wearever – Bleeder Screw (sold by each) (Part No.301H9406)
from
$0.99
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Carquest Wearever – Bleeder Screw (Part No.H9402-2)
from
$3.79
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- This part matches Original Equipment (OE) quality specifications
Carquest Wearever – Bleeder Screw (sold by each) (Part No.3019409RY)
from
$0.99
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Dorman – Brake Bleeder Screw M8-1.25 X 24mm (Part No.484-150.1)
from
$2.99
This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Clutch Alignment Tool Splines 26, Outer Diameter 1-1/8 In. (Part No.14523)
from
$3.49
Ensure proper alignment during clutch installations and service with this convenient clutch alignment tool. Made of quality materials for long and reliable service life.
Product Features:
See More
Product Features:
- Convenient solution – ensure proper alignment during clutch installations and service with this handy alignment tool
- Restores functionality – do the job right the first time with the right tool
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Melling – Oil Pump Screen Installation Tool (Part No.MCAT-62)
from
$108.99
Melling suggests that a new properly installed oil pump pick-up tube or screen be a part of every oil pump installation. Melling oil pump screen installation tools provide an easy method for installing a press fit oil pump screen into the oil pump correctly without damaging the oil pump screen tube. Melling oil pump screen installation tools are precision manufactured from high quality materials for worry free performance every time. Melling offers oil pump screen installation tools for both 5/8 inch and 3/4 inch diameter tubes.
Product Features:
See More
Product Features:
- Screen installation tool allows for installing press-in type oil pump screen assembly safely
- Manufactured from high quality materials for consistent durability
- For use with 5/8 In. diameter tubes
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
Melling – Oil Pump Screen Installation Tool (Part No.MCAT-75)
from
$127.99
Melling suggests that a new properly installed oil pump pick-up tube or screen be a part of every oil pump installation. Melling oil pump screen installation tools provide an easy method for installing a press fit oil pump screen into the oil pump correctly without damaging the oil pump screen tube. Melling oil pump screen installation tools are precision manufactured from high quality materials for worry free performance every time. Melling offers oil pump screen installation tools for both 5/8 inch and 3/4 inch diameter tubes.
Product Features:
See More
Product Features:
- Screen installation tool allows for installing press-in type oil pump screen assembly safely
- Manufactured from high quality materials for consistent durability
- For use with 3/4 In. diameter tubes
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
Popular 1990 Chevrolet Corvette Tools Categories
1990 Chevrolet Corvette Tools
You count on your 1990 Chevrolet Corvette to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Tools. With 19 Tools ranging in price from $0.99 to $709.99, you’re sure to find everything you need for your 1990 Chevrolet Corvette.
Brands matter. If you want to shop a specific Tools brand, we stock 7 different brands like Dorman, Carquest, and Earls Performance Product. 1990 Chevrolet Corvette Tools start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Tools is by asking professionals. Short of that, you can shop with confidence thanks to our 61 extensive product reviews on 1990 Chevrolet Corvette Tools. Some of the top-rated Tools products we carry are Oil Pump Screen Installation Tool with 3.0 stars and Bleeder Screw with 1.0 stars.
Did we mention you can order your Tools from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Tools inventory for your 1990 Chevrolet Corvette below to get started!
Top-Rated Tools Brands For Your 1990 Chevrolet Corvette
Trusted Tools OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1990 Chevrolet Corvette running right for years to come. In our inventory you’ll find brands like Dorman, Carquest, Earls Performance Product, and even more.
Popular Russell Tools
You’ll find popular Russell brand products across Brake Tools. All are waiting to get your 1990 Chevrolet Corvette back on the road. Some of the top-rated Russell products in these categories are:
Top-Rated Dorman – Help Tools
If Dorman – Help are what you’re looking for, our inventory holds plenty. We stock Dorman – Help brand Tools for your 1990 Chevrolet Corvette, and some of our most reviewed Dorman – Help parts include:
FAQs for 1990 Chevrolet Corvette Tools
What are the most purchased Tools for the 1990 Chevrolet Corvette?
Out of 19 Tools for the 1990 Chevrolet Corvette, the most popular in our inventory are:
from
$3.49
This product is not rated
Clutch Alignment Tool Splines 26, Outer Diameter 1-1/8 In.
Clutch Pilot Tools
What are the top-rated 1990 Chevrolet Corvette Tools?
Top-rated Tools for your 1990 Chevrolet Corvette based on customer reviews/ratings are:
from
$108.99
(1)
Oil Pump Screen Installation Tool
“I purchased an MCAT-62 Oil Pump Screen installer for a 2001 Pontiace Montana 3.4 The problem is it requires an MCAT-75, I believe the product would be”
from
$6.79
(1)
Bleeder Screw
“These are supposed to fit my 2000 Altima, The bleeder screws on the car are about m7 -1. The other bleeder screws listed for my car are m10-1. I’m ”
