Chevrolet Avalanche 2500 Air Conditioning Parts

ACDelco GM Original Equipment A/C Hose Assemblies connect A/C system components to carry the refrigerant. All parts are GM-recommended replacements for your vehicle’s original components. These hoses are designed to withstand high pressures and temperatures. The hard lines are typically made from extruded aluminum or sometimes from coated steel. The hose is chemical-resistant and has hydraulically crimped fittings. Service ports are specifically designed for service equipment and the particular refrigerant used. This original equipment A/C hose assembly has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Repair leaking A/C system, restore A/C function
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

High quality OE replacement part with all components needed to complete the job

Product Features:

• All the seals needed to complete the job
• Compatible with both R134a and R12 refrigerants
• Application specific
• SUV and rear air applications

Product Features:

• Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
• A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
• Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
• The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.

New Standard Replacement A/C System Seal Kit, MT2741, L4 Engine

Product Features:

• MT2741, L4 Engine
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

High quality OE replacement part with all components needed to complete the job

Product Features:

• Contains gaskets, O-rings, or seals to properly replace the product
• Color coded for easy identification
• Zinc coated to resist corrosion
• Improved 2 terminal design replacing older 1 terminal switch

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and longevity.

Product Features:

• Durable materials – manufactured to specific thread tolerance standards
• Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
• Multipurpose usefulness – can be used in a variety of applications, from auto to home
• Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

GM Genuine Parts A/C Condensers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These condensers are heat exchangers typically located in front of the engine radiator. The condenser dissipates heat absorbed by the refrigerant from the evaporator and from the compressor to the outside air. Hot refrigerant gas passes through tubes, where heat is removed, causing it to turn into a liquid. The air flowing through the fins carries the heat away. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Brazed and mechanically bonded aluminum construction for OE durability
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
• GM regularly updates production and service part designs to integrate new materials and technologies

ACDelco GM Original Equipment A/C Compressor Clutch Kits include the compressor clutch, which engages and disengages the compressor when the A/C is switched ON and Off, and other related components. The compressor clutch consists of a pulley, pressure plate, and electromagnetic coil. This original equipment A/C compressor clutch kit is a GM-recommended replacement for you vehicle’s original components and has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Restore A/C compressor clutch to like new performance
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Motor RPM equivalent to or exceeds OEM motor

Product Features:

• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

• Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
• Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
• All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

High quality OE replacement part with all components needed to complete the job

Product Features:

• All the seals needed to complete the job
• Compatible with both R12 and R134a refrigerants
• SUV and rear air applications
• Application specific

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Controlled heat treating process for lasting performance and extended bearing life
• Industry leading coverage
• Professional technicians know they can depend on National

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

• Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
• Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
• Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
• Versatile component – this connector can be used in a variety of repairs and custom installations

GM Genuine Parts A/C Orifice Tubes are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These tubes, which separate the high and low pressure sides of the air conditioning system, control the flow of low pressure liquid refrigerant into the evaporator. The orifice tube is essentially a calibrated restriction located at the inlet to the evaporator. This causes the necessary pressure drop to allow the liquid refrigerant to evaporate within the evaporator and absorb heat. Since the orifice tube is fixed, the system is regulated by either cycling the compressor clutch or by a variable displacement compressor. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Restores A/C performance due to restricted orifice tubes
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
• GM regularly updates production and service part designs to integrate new materials and technologies

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• Our Canister Purge valves meet or exceed original equipment specifications, providing confidence in every box
• Featuring industrial grade materials for robust performance
• Decades of industry leading research and development focused on meeting the technician’s needs
• With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

• 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
• Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
• Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
• Welds and crimps meet and exceed original equipment tension specifications.
• Manufactured to allow flexibility in the hose to conform to engine compartments.
• O-Rings necessary for installation are included.

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Helps connect or disconnect power to vehicle accessories
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:

• Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
• New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
• The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
• All new compressors must pass a helium leak test and pump up function test prior to packaging.
• Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
• Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
• All accumulators are helium leak tested prior to packaging.
• Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
• The specific PAG oil required by your vehicle application is included.
• O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.

GM Genuine Parts A/C Accumulators are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These accumulators are used in A/C systems with an orifice tube metering device. The accumulator is located between the evaporator and the compressor, and serves to capture and store excess liquid refrigerant. This prevents liquid refrigerant from entering the compressor where it can damage the compressor. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Removes harmful moisture from the A/C refrigerant system
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
• GM regularly updates production and service part designs to integrate new materials and technologies

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

For more than a century, Delphi has been making the parts cars are born with – often developing new technologies in the process. Delphi is proud of its OE heritage, and over the years they’ve used that experience to expand into a global aftermarket supplier.

Product Features:

• Meets or exceeds OE specifications
• All Delphi evaporators undergo vibration, burst, corrosion and pressure cycle testing, as well as rigorous thermal and hydrodynamic performance tests for high quality
• Unique core design offers increased water shedding capability for improved performance.

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• NTK ABS Wheel Speed Sensor connectors, mounts and wire lengths are an exact match to OE for worry free installation. Grease, mounting nut and instruction sheet included where applicable.
• NTK’s Wheel Speed Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function. Manufactured with weather pack connectors to prevent dirt and moisture contamination.
• The ABS ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up.

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.