2003 Chevrolet Avalanche 2500 Air Conditioning Parts

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

• All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
• Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
• All accumulators and receiver driers are helium leak tested prior to packaging.
• O-Rings necessary for installation are included.

GM Genuine Parts A/C Orifice Tubes are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These tubes, which separate the high and low pressure sides of the air conditioning system, control the flow of low pressure liquid refrigerant into the evaporator. The orifice tube is essentially a calibrated restriction located at the inlet to the evaporator. This causes the necessary pressure drop to allow the liquid refrigerant to evaporate within the evaporator and absorb heat. Since the orifice tube is fixed, the system is regulated by either cycling the compressor clutch or by a variable displacement compressor. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Restores A/C performance due to restricted orifice tubes
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
• GM regularly updates production and service part designs to integrate new materials and technologies

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

• Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
• O-Rings necessary for installation are included.
• Color coded

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

• The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
• Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
• Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
• O-Rings necessary for installation are included.

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

• The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
• Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
• Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
• O-Rings necessary for installation are included.

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

• Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
• O-Rings necessary for installation are included.
• O-Rings necessary for installation are included.

ACDelco GM Original Equipment A/C Orifice Tubes, which separate the high and low pressure sides of the air conditioning system, control the flow of low pressure liquid refrigerant into the evaporator. The orifice tube is essentially a calibrated restriction located at the inlet to the evaporator. This causes the necessary pressure drop to allow the liquid refrigerant to evaporate within the evaporator and absorb heat. Since the orifice tube is fixed, the system is regulated by either cycling the compressor clutch or by a variable displacement compressor. This original equipment orifice tube is a GM-recommended replacement for your vehicle’s original components and has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Restore A/C performance due to restricted orifice tubes
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

• Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
• New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
• The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
• All new compressors must pass a helium leak test and pump up function test prior to packaging.
• O-Rings and gaskets necessary for installation are included.
• Matched high-quality needle-roller bearing ensures low friction and high load capability.
• Light weight aluminum energy-saving casting used for construction.

New Standard Replacement A/C Compressor, Denso, V8 Engine

Product Features:

• Denso, V8 Engine
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:

• Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
• All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
• All units have new seals, O-rings, gaskets and clutch bearings
• Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
• Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
• Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
• Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
• Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
• Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process

As one of the world’s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:

• DENSO is the world’s largest OE supplier of A/C compressors
• Each compressor is precision manufactured for exact replacement
• Designed for high output and extended durability
• Highest quality in the Aftermarket

New Standard Replacement A/C Compressor, Model 10S17F, 4 Groove, With Switch Port 115MM Clutch Diameter

Product Features:

• Model 10S17F, 4 Groove, With Switch Port 115MM Clutch Diameter
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

• This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
• The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
• Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
• Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
• All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
• We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
• Our condensers are manufactured from rigid design standards to fit OEM dimensions.
• Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
• Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.

New Platinum Pro A/C Condenser, V6/V8, Without Rear A/C, Without Ambulance Package

Product Features:

• V6/V8, Without Rear A/C, Without Ambulance Package, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle