Buick Verano Cooling and Climate Controls

Essential Buick Verano Cooling and Climate Controls

Dorman – HVAC Blend Door Gear Kit (Part No.926-758)

HVAC Blend Door Gear Kit

from

$19.99
Air not flowing through the dash vents properly? Repair a worn or broken blend door actuator with this replacement HVAC blend door gear kit. Saves time and money by replacing only the worn gear while preserving the rest of the blend door assembly.

Product Features:
  • Direct replacement – this blend door gear replaces only the damaged original gear without requiring a new blend door assembly
  • Quality construction – this blend door gear is made from quality materials for a long service life
  • Saves time and money – huge savings replacing only the worn HVAC blend door gear instead of the complete blend door
  • Quality assured – this part has undergone testing to ensure a trouble-free installation
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1017)

Multi-Use Connector

from

$30.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1011)

HVAC Blower Motor Resistor

from

$54.99
Carquest Premium blower motor resistors are designed to restore proper functionality in the HVAC system while meeting or exceeding original equipment (O.E.) specifications. Carquest Premium blower motor resistors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium blower motor resistors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium blower motor resistors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured with high quality materials, industry-leading electronic components and strict quality controls
  • Extensive design validation testing and 100% end-of-line tested
  • Gaskets or seals are included if required
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39368)

A/C Block Type Flange Expansion Valve

from

$48.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54218)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$17.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83235)

A/C Desiccant Bag Kit

from

$26.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – Coolant Temperature Sensor 1TS1001 (Part No.WTC1002)

Coolant Temperature Sensor 1TS1001

from

$19.99
Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
  • O-rings, seals or thread sealant are included if required
  • Weather-tight connectors prevent leaks and corrosion for longer life
  • Extensive design validation testing and 100% end-of-line tested
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Dorman – Pigtail -Evap. Canister Vent Valve Solenoid, Red, 2-way with Leads (Part No.645-631)

Pigtail -Evap. Canister Vent Valve Solenoid, Red, 2-way with Leads

from

$41.99
Make better electrical repairs and accessory installations with a Dorman pigtail connector. Designed for a clean appearance when installed, Dorman connectors are ideal for neatly securing wiring jobs in automotive, commercial, industrial and household applications. Our pigtails are constructed from quality materials for long service life and resistance to the elements, and offer a range of features including locking tabs, weatherproof seals and more, where applicable. Check the product details to choose the best product for your electrical wiring needs.

Product Features:
  • Ideal solution – this pigtail connector is designed to neatly connect to an idle control valve on specified vehicles
  • Ensure fit – check the product details to choose the best product for your needs
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement (Part No.603-383)

Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement

from

$41.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part
  • Ideal solution – engineered for a seamless installation
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Felpro – Engine Coolant Thermostat Gasket (Part No.36122)

Engine Coolant Thermostat Gasket

from

$4.49
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44146)

A/C Plate and Fin Evaporator

from

$133.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813325)

Radiator: With Transmission Oil Cooler

from

$226.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Carquest Premium – A/C New, with Clutch, with CVC Compressor (Part No.T158273)

A/C New, with Clutch, with CVC Compressor

from

$704.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – Standard Thermostat: With Seal, 180 Degrees (Part No.14698)

Standard Thermostat: With Seal, 180 Degrees

from

$32.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Dorman – Help – Radiator Drain Cocks (Part No.61136)

Radiator Drain Cocks

from

$5.49
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:
  • Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
  • Durable construction – this part is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this petcock has undergone virtual testing to assure proper fit and function
See More

GM Genuine Parts – Air Conditioning Line O-Ring (Part No.13579649)

Air Conditioning Line O-Ring

from

$21.79
GM Genuine Parts Rubber-Bonded Sealing Washers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T4199)

Engine Water Pump: New, Gasket/Seals Included

from

$89.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • Built to meet or exceed OE fit, form and function
  • All components necessary for installation are supplied with pump
  • 100% tested for reliable performance
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2647)

Black Multi-Purpose Pigtail

from

$31.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Humidity Sensor (Part No.ACA2024)

Humidity Sensor

from

$95.99
The heating-ventilation-air-condition (HVAC) air distribution system is designed to control the movement of air in the HVAC air distribution assembly as well as control the interior cabin temperature. Actuator doors which may be mechanically or electrically operated with a motor allow air movement through the system to provide the vehicle occupants the requested temperature desired for comfort. The Humidity Sensor reports interior cabin humidity levels and operates the climate system to remove uncomfortable high humidity levels.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Cloyes Gear – Engine Water Pump Gear (Part No.S911)

Engine Water Pump Gear

from

$33.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:
  • Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
  • Helical tooth form for quiet operation and precision machined bore for true fit
  • CAD designed and manufactured using premium materials to ensure optimal performance
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Refer to our online catalog for detailed application-specific information
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1336)

Multi-Use Connector

from

$72.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA3046)

Multi-Use Connector

from

$101.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12033)

Radiator Cap Tester Adapter

from

$95.99
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – Blower Motor: with Wheel (Part No.76933)

Blower Motor: with Wheel

from

$162.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM.Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Helping You Find the Right Cooling and Climate Controls for Your Buick Verano

You love your Verano. So we’ve made it easier than ever to help you find Buick Verano Cooling and Climate Controls in our online catalog. Our inventory holds 81 aftermarket and OEM Cooling and Climate Controls for your Buick Verano, ranging from $4.49 to $704.99.

We offer parts from 12 brands trusted to make quality Cooling and Climate Controls for your Buick Verano. Before you buy, take some time to read through customer reviews. We currently have 6,205 reviews of Buick Verano Cooling and Climate Controls from previous customers. Some of the top rated parts include Cap & Valve A/C System Seal Kit with 4.0 stars and Engine Water Pump: New, Gasket/Seals Included with 3.7 stars.

Find your Verano Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Buick Verano part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Cooling and Climate Controls Brands for Your Buick Verano

Our inventory holds Cooling and Climate Controls for your Buick Verano from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Dorman, and Imperial, all of which can keep that Buick happy.
We have ACDelco parts available for your Buick Verano in categories like Engine Cooling Parts. Some of the top-rated ACDelco parts in these categories are:
Engine Coolant Temperature Sensor
from $38.99
(1)
Engine Coolant Temperature Sensor
Coolant Temperature Sensors

Top-Rated Imperial Cooling and Climate Controls

Leading Imperial Cooling and Climate Controls

We carry Imperial brand parts for your Buick Verano across several catalog categories, including Engine Cooling Parts. Some of our most reviewed Imperial parts include:
Electric Fan, 12" Diameter
from $108.99
(38)
Electric Fan, 12" Diameter
Radiator Fan Motors
Adjustable Thermostatic Fan Control
from $23.99
(35)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Adjustable Thermostatic Fan Control
from $65.99
(33)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers

FAQs for Buick Verano Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the Buick Verano?

Out of 81 Cooling and Climate Controls for the Buick Verano, the most popular in our inventory are:
Standard Thermostat: With Seal, 180 Degrees
from $32.49
(35)
Standard Thermostat: With Seal, 180 Degrees
Thermostats
Coolant Temperature Sensor 1TS1001
from $19.99
This product is not rated
Coolant Temperature Sensor 1TS1001
Coolant Temperature Sensors

What are the top-rated Buick Verano Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your Buick Verano based on customer reviews/ratings are:
Cap & Valve A/C System Seal Kit
from $18.99
(26)
Cap & Valve A/C System Seal Kit
“Seals for high and low side works great. A good idea to replace both before recharging your system.”
Engine Water Pump: New, Gasket/Seals Included
from $89.99
(23)
Engine Water Pump: New, Gasket/Seals Included
“to change the water pump on my car is a lot harder then older cars. I like the fact that it has metal fins, my old one had plastic”
Electric Fan, 14" Diameter
from $99.99
(14)
Electric Fan, 14" Diameter
“Fit fine. Easy install. Cools the car.”