BMW 535i Fluids and Chemicals

Prestone Platinum antifreeze+coolant is Prestone’s best universal antifreeze and coolant product. Guaranteed to work with all vehicles; all makes, models, years and fluid colors. 15+ years, 350,000 miles of protection; the fluid is Guaranteed for the life of your vehicle. This advanced product delivers Extreme Protection against both freezing temperatures (-50 deg.) and overheating/boiling over of the engine (+268 deg.). Prestone Platinum utilizes industry leading protection from engine damaging rust, corrosion, buildup and scale. While ordinary antifreeze coolant only focuses on the basic corrosion coverage, Prestone Platinum goes farther, adding our most advanced cooling system protection, allowing the system to run optimally, like when it was new. Internal buildup and corrosion damage can cause engine part failure or clogging, leading to expensive repairs and inconveniences. Prestone Platinum helps you avoid costly repairs and vehicles in the shop. This extended life coolant is Guaranteed to work with all new engines and engine technology, while also being backwards compatible, improving protection in all older engines. Prestone Platinum antifreeze+coolant – Year Round Protection.

Product Features:

• Guaranteed to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT and IAT; G05, G11, G12, G12++, G13, G30, G40, and GG40. For all engines and engine sizes, new and older engines.
• 15+ year/350,000 mile Extended life formula. The fluid is guaranteed for the life of your vehicle
• Includes our most advanced Prestone Cor-Guard technology, unmatched cooling system parts protection that protects against engine damage; rust, corrosion, scale, build-up and clogging. Protection for 15+yrs/350,000 miles.
• Concentrated formula. Must mix with high quality water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

FRAM Conventional Green Concentrate is an ethylene glycol-based product for use in car and light duty trucks that are already using a conventional coolant. The inhibitors prevent rust, corrosion, and provide freeze-up and boil-over protection. When used as directed, the Prime Green Concentrate Low Silicate formula provides full protection for a minimum of one year.

Product Features:

• Low Silicate Formula.
• When used as directed, will provide protection for a minimum of 1 year
• Meets or exceeds ASTM requirements for cars, light duty trucks
• Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

Product Features:

• Reduces heat & wear
• Eliminates TQ converter shudder & clutch pack chatter
• For all automatic transmissions & 4×4 transfer cases

Only compatible with R134a refrigerant; Tools required for installation; Plastic bottle; Universal applications

Only compatible with R134a refrigerant; Tools required for installation; Plastic bottle; Universal applications

Certified A/C Pro R-134a PAG 46 Refrigerant Oil with ICE 32. This product contains approximately 8 fluid ounces of PAG refrigerant oil with ICE32. Low viscosity PAG oil for R-134a auto A/C systems; ISO 46 viscosity. R-134a PAG 46 AC Oil Lubricant: with ICE 32 Lubricant Enhancer features advanced chemistry to help extend compressor life and improve cooling capacity. The PAG oil helps quiet noisy compressors. Meets OEM specifications.

Product Features:

• Low viscosity PAG oil for R-134a auto A/C systems; ISO 46 viscosity
• ICE32 Lubricant Enhancer: advanced chemistry to help extend compressor life and improve cooling capacity
• Meets OEM specifications

Valvoline High Mileage with MaxLife Technology SAE 10W-40 Synthetic Blend Motor Oil is a premium quality engine oil designed to provide superior protection for high mileage engines. This synthetic blend motor oil is formulated with MaxLife Technology that helps to reduce engine wear, prevent leaks, and keep the engine clean. It is specially designed for engines with over 75,000 miles and provides excellent protection against sludge and other harmful deposits. The 5-quart container is perfect for topping off or complete oil changes. Valvoline High Mileage with MaxLife Technology SAE 10W-40 Synthetic Blend Motor Oil is a reliable choice for drivers who want to extend the life of their high mileage engines.

Product Features:

• Enhanced anti-wear additives deliver a thick & durable layer of anti-wear film to help prevent auto engine breakdown
• Added detergents protect against engine-clogging sludge and deposits
• Premium seal conditioners help treat and prevent leaks
• Superior antioxidants resist engine oil breakdown in extreme conditions
• Protects gasoline direct injected engines from low-speed pre-ignition
• EZ Pour design incorporates a centralized handle, easy-pull tab, anti-glug tube and precision pour spout to make changing your oil faster, easier and cleaner than ever before
• Maximizes the life of engines over 75,000 miles

High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

Product Features:

• Better Wear Protection
• Increased Protection against Low Speed Pre-Ignition
• Increased Fuel Efficiency
• Better Protection for Vehicle Exhaust Emissions Equipment
• Improved Compatibility with Fuels Containing Ethanol
• Superior Corrosion Protection
• Made in USA

Valvoline Full Synthetic MaxLife Multi-Vehicle ATF, the No. 1 ATF product, suitable for use in 95% of vehicles. And now, it’s recommended for most belt & chain-driven continuously variable transmissions (CVT). Featuring advanced additives to prevent the major causes of transmission breakdown, it’s designed to help prevent leaks, reduce wear & tear, and maximize performance. Has improved thermal stability for longer fluid life, better viscosity stability for consistent transmission operation, and frictional enhancements for smooth gear engagements. Valv MaxLife Multi-Vehicle ATF is suitable for most Ford, GM, Toyota, Honda, Nissan, Hyundai, Subaru, BMW, Mercedes, Volvo, VW & Audi vehicles. Recommended for use in: GM DEXRON-II, DEXRON-III, DEXRON-VI, and DEX-CVT; Ford MERCON LV; Toyota/Lexus Type T, T-II, T-IV, WS, CVTF FE, and CVTF TC; Honda/Acura ATF-Z1 and Honda CVT; Nissan/Infiniti Matic-D, Matic-J, Matic-K and Matic-S; Hyundai/Kia SP-II, SP-III, SP-IV and SPH-IV; BMW 7045E, ETL 8072B, LA2634 and LT71141; Allison C-4; Mercedes-Benz NAG-1; Volvo 1161521, 1161540, 97340 and 1273.41; Subaru ATF HP, Lineartronic chain CVT and CVT-II, Lineartronic High Torque CVT, and CV-30; and VW/Audi G-052-025-A2 and G-052-162-A1. CURRENTLY UNABLE TO SHIP THIS PRODUCT TO CUSTOMERS LOCATED IN CALIFORNIA

Product Features:

• FOR USE IN 95% OF VEHICLES INCLUDING MOST CVTs in operation with US registered light duty applications
• HIGH PERFORMANCE CONDITIONING AGENTS prolong seal elasticity to prevent leaks
• IMPROVED DURABILITY & TRANSMISSION LIFE with anti-wear technology to avoid costly repairs
• ENHANCED HIGH & LOW TEMP PERFORMANCE supports transmission fluid in all weather situations

Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

• Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
• High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Mobil 1 advanced full synthetic motor oil 5W-30 helps to extend engine life for vehicles of all ages. Mobil 1 advanced synthetic motor oil is designed to deliver outstanding engine protection from the five factors that can damage engines over time and protect critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. Mobil 1 helps to keep your engine running at lower temperatures. (2) This technologically advanced motor oil is proven to cool engine temperatures by over 10%. (3) Its formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -30 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 advanced full synthetic motor oil meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Mobil 1 advanced full synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s leading synthetic motor oil brand at retail, recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing results may vary. (4) Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO Full Synthetic/52 weeks ending July 1, 2023.)

Product Features:

• Mobil 1 advanced full-synthetic engine oil 5w-30 utilizes Mobil 1’s signature triple action formula to deliver outstanding engine performance, protection, and cleanliness
• Helps protect critical engine parts for up to 10,000 miles between oil changes, (1) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Meets ilsac gf-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
• Manufacturer part number: 124317

If you trust your vehicle to be there for you, you need to be there for its engine, with Mobil 1 Extended Performance full-synthetic motor oil 5W-30. Our ultimate full-synthetic motor oil meets or exceeds the industry’s toughest standards to help you get the most from your engine for up to 20,000 miles between oil changes, guaranteed.(1) Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US.(2)Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO full-synthetic/52 weeks ending Feb 25, 2023)

Product Features:

• Mobil 1 Extended Performance full-synthetic motor oil 5W-30 helps protect critical engine parts for up to 20,000 miles between oil changes, (1) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity.
• Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Manufacturer Part Number: 120766
• Versatile Compatibility: Recommended for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines in passenger cars, SUVs, light vans, and light trucks.
• Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR«.

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• MaxLife High Mileage Synthetic Blend Engine Oil is specially designed for engines with over 75,000 miles, providing greater protection and maximizing engine life.

Product Features:

• Additional seal conditioners to prevent or help stop leaks
• Extra cleaning agents to reduce varnish and sludge formulation
• Protects against clutch wear
• Restores smooth shifting
• Greater frictional durability provides superior transmission performance
• Can be used in a wide variety of specifications including DEXRON«-IIIH, MERCON«áand JASO-1A.
• Exceeds all passenger car and light truck manufacturer┐s warranty requirements for vehicles, transmissions or power steering service where a DEXRON«-IIIH or MERCON« type ATF is specified

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON, GM DEXRON-II and DEXRON-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III, Toyota/Lexus Type T, T-III and T-IV, Honda/Acura ATF-Z1 (except in CVTs), Mercedes Benz NAG1, Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Castrol® Transmax® ATF/CVT Universal is a premium full-synthetic transmission fluid engineered for exceptional performance in both traditional step-shifting automatic transmissions and modern continuously variable transmissions (CVTs). Featuring Castrol Smooth Drive® Technology, it ensures enhanced friction durability for seamless gear shifts and superior high-temperature protection to resist oxidation. This advanced formulation offers unmatched protection against copper corrosion, extending the life of your transmission system. Its broad compatibility covers a wide range of ATF and CVT applications, including Dexron VI, Mercon LV, Toyota WS, Honda DW-1, Nissan Matic S, and many more, making it ideal for diverse vehicle types, including hybrids. Designed to improve workshop efficiency and simplify inventory management, this fluid is a versatile solution for professional mechanics and DIY enthusiasts alike. Packaged in a convenient 1-gallon size, it delivers outstanding value and reliability for maintaining optimal transmission performance.

Product Features:

• Enhanced friction durability for smooth transmission performance
• Superior high temperature protection to effectively resist oxidation
• Unsurpassed protection against copper corrosion
• Broad scope of vehicle applications improves workshop efficiency and inventory management
• ATF Applications: Dexron VI (Dexron III, Dexron), Mercon LV (Mercon SP, Mercon V, Mercon), JASO 1A (03), JASO 1A LV (13), Toyota T IV, Toyota T III, Toyota WS, Honda/Acura DW 1/Z 1, Nissan Matic D, Matic J, Matic S, Hyundai/Kia SP IV, SP III
• ATF Applications: Mazda ATF M-V, M-III, FZ, Mitsubishi SP IV, SP III, IIM, II, PA, J3, VW/Audi (6, 8 & 9 speed automatics), BMW/Mini (6, 8 and 9 speed automatics), Jaguar/Land Rover (6, 8 & 9 speed automatics), Porsche (6, 8 & 9 speed automatics)
• ATF Applications: Volvo (6, 8 and 9 speed automatics), Volvo Transmission Oil 97342, AT102, Mercedes-Benz (7 and 9 speed automatics)
• CVT Applications: Toyota CVT Fluid TC, Toyota CVT Fluid FE , Nissan CVT Fluid NS-1, Nissan CVT Fluid NS-2, Nissan CVT Fluid NS-3, Subaru i-CVT Fluid, Subaru i-CVT FG, Subaru Lineartronic High Torque Chain CVTF, Honda HCF-2

Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:

• HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
• EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
• REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
• FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
• SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions

Prestone MAX DOT 4 Motor Vehicle Brake Fluid is our highest grade formula, maximizing performance vs. DOT standard. Prestone MAX is our best brake fluid at protecting against overheating and brake fade. With 75,000 mile fluid life, our longest life fluid has 1.5X more miles between replacement than regular Prestone DOT 3. Prestone MAX has superior performance in severe braking conditions when compared to regular Prestone DOT 4, which means even more piece of mind about the braking system. This synthetic fluid starts with our highest dry boiling point giving our best protection against performance decline due to water absorption. Prestone MAX DOT 4 is safe to use in all DOT 4 braking systems, ABS, disc or drum, and can mix with any DOT 4 fluid. Mixing Prestone MAX with other fluids will lower the performance rating for miles and boil points, for best results replace completely with Prestone MAX DOT 4. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

• 75,000 Mile Fluid Life
• Prevent Overheating and Brake Fade with Our Highest Grade Formula. Prevents corrosion of all metals within the braking system.
• Superior Protection in Extreme Braking Conditions
• Synthetic, Long Life Formula – 1.5X Longer than regular Prestone DOT 4

Prestone DOT 4 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 4. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system.  This formula is safe to use in all DOT 4 braking systems (ABS, disc or drum) and can mix with any DOT 4 fluid.  It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

• 50,000 Mile Fluid Life
• Prevent Overheating and Brake Fade with High Grade Formula
• Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
• Synthetic, Extended Fluid Life Formula

Pentosin DOT 4 LV is a special brake fluid of highest DOT 4 performance levels and extremely low viscosity at cold temperatures. It offers safety against vapor lock; it has excellent resistance to absorbing and retaining water and provides superior corrosion resistance. Pentosin DOT 4 LV Brake Fluid is ideal for all modern vehicles with ESP and ABS. DOT 4 LV can be used in all vehicles that require DOT 4 fluid. High safety margin against vapor lock. Long-term resistance to absorbing and retaining water. Superior corrosion resistance. Low viscosity fluid provides excellent flow performance at low temperature.

Product Features:

• Safety against vapor lock
• Provides superior corrosion resistance
• Highest DOT 4 performance levels and extremely low viscosity at cold temperatures.

Pentosin Super DOT 4 is a brake fluid of superior quality for universal use in modern brake systems and ideal for vehicles with ABS systems. Pentosin Super DOT 4 offers safety against vapor lock; it has excellent resistance to absorbing and retaining water and provides superior corrosion resistance.

Product Features:

• Safety against vapor lock
• Provides superior corrosion resistance
• Long-term resistance to absorbing and retaining water.

FRAM Global ATF is formulated to meet the fluid needs of a broad range of automatic transmissions. Using advanced additive technology and base fluids, it is suitable for service fill of many transmissions manufactured by North American, Asian, and European OEMs. FRAM Global ATF provides oxidation and thermal stability, friction control, load-carrying ability, corrosion and wear protection. It helps protect against the formation of sludge, varnish and foam. FRAM Global ATF has exceptional low temperature flow properties and enhanced protection against viscosity breakdown at high temperatures. It also has exceptional oxidation and thermal stability, resulting in maximum service life.

Product Features:

• Maintains friction control for smooth shift action and protection against shudder
• Retains high temperature viscosity resulting in maximum oil film thickness and excellent wear
• Retains high temperature viscosity resulting in maximum oil film thickness andáexcellent wear
• Controls sludge, corrosion, and wear of gears
• Always Refer To Your Vehicles Operating Manual To Select The Correct Grade Fluid For Your Transmission
• Transmission Fluids Also Applicable In Power Steering Units; Check Owners’ Manual

Transmax Full Synthetic ATF is a premium, low-viscosity automatic transmission fluid engineered to optimize performance and fuel efficiency in modern vehicles. Its full synthetic formulation ensures enhanced friction durability for smooth and reliable transmission operation, while superior high-temperature protection resists oxidation and copper corrosion for long-lasting performance. OEM-approved and licensed by Ford (MERCON® LV) and GM (DEXRON®-VI), this fluid meets stringent industry specifications, including JASO-1A, making it compatible with all GM vehicles requiring DEXRON®-VI or earlier versions, as well as Ford vehicles specifying Mercon® LV. Designed to deliver unsurpassed protection and efficiency, this 1-quart solution is ideal for drivers seeking maximum reliability and fuel economy in their automatic transmissions.

Product Features:

• Full Synthetic, low viscosity formulation
• OEM approved and licensed by Ford (MERCON® LV) and GM (DEXRON® -VI)
• Low viscosity formula for maximum fuel efficiency in modern automatic transmissions
• Enhanced friction durability for smooth transmission performance
• Superior high temperature protection to effectively resist oxidation
• Unsurpassed protection against copper corrosion
• Industry Specifications and OEM Approvals: JASO-1A
• Licensed and approved for use in: All GM vehicles (DEXRON®-VI, All previous DEXRON®); All Ford vehicles which specify Mercon® LV

Valvoline Dual Clutch is a full synthetic transmission fluid specifically engineered to protect and prolong the life of dual clutch automatic transmissions. Recommended for us in the following applications: BMW 83 220 440214, Ford M2C 936A, MB 236.21, MB 236.25, Volvo 1161838, Volvo 1161839, VW G 052 182.

Product Features:

• Formulated with premium friction modifiers to ensure smooth shifting performance under variable driving conditions
• Formulated with premium synthetic base oils to minimize thermal breakdown and deposits
• Advanced anti-wear technology to better prevent gear wear
• Excellent anti-shudder durability

FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors vehicles requiring MERCON, DEXRON-I, DEXRON-II and DEXRON-III. It is also recommended for transmissions, power steering systems, and hydraulic systems requiring a DEXRONIII or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is recommended for use in all transmissions, hydraulic systems, and power steering units manufactured by American, European, Korean, Japanese and other manufactures from around the world specifying DEXRONIII H/Mercon and earlier DEXRON/Mercon type transmission fluids.

Product Features:

• Good foam and corrosion prevention
• Safe for seals
• Promotes smooth shifting
• Always Refer To Your Vehicles Operating Manual To Select The Correct Grade Fluid For Your Transmission
• Transmission Fluids Also Applicable In Power Steering Units; Check Owners’ Manual