BMW 328i xDrive Steering and Chassis Parts

Essential BMW 328i xDrive Steering and Chassis Parts

Dorman – Suspension Control Arm (Part No.524-526)

Suspension Control Arm

from

$94.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010392433LEM)

ZF/Lemfoerder Tie Rod End

from

$113.31
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Cardone – Power Steering Filter (Part No.20-0038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Burgaflex – P/S Return Hose (Part No.M2016415503BUR)

P/S Return Hose

from

$97.27
P/S Return Hose

Lemfoerder – OE Replacement Ball Joint (Part No.L2020241536LEM)

OE Replacement Ball Joint

from

$68.93
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Lemfoerder – Control Arm Bushing (Part No.L2030526764LEM)

Control Arm Bushing

from

$20.22
The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
See More

Whiteline – Subframe Mount Bushing (Part No.KDT918)

Subframe Mount Bushing

from

$58.99
Not your typical remove and replace bushing kit but simple installation means great for the DIYer’s. Designed to work with the original bushing and eliminate over compliance or better known in motorsport as ‘lost motion’ of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.

Product Features:
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
See More

Lemfoerder – OE Replacement Guide Rod (Part No.L2015749911LEM)

OE Replacement Guide Rod

from

$85.35
The Lemfoerder Guide Rod is manufactured using only the highest quality materials and is designed to maintain OE suspension geometry.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Bushings resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Whiteline – Sway Bar Link (Part No.KLC154)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Dorman – Lower Steering Shaft (Part No.425-751)

Lower Steering Shaft

from

$514.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:
  • Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
  • Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
  • Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
  • Corrosion resistant – salt spray testing and premium coating help ensure future longevity
See More

Cardone – Rack and Pinion Assembly (Part No.26-2807)

Rack and Pinion Assembly

from

$596.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Carquest Premium – Pressure Line Hose Assembly (Part No.37912)

Pressure Line Hose Assembly

from

$201.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

ZF – Power Steering Reservoir Cap (Part No.M2070442134ZF)

Power Steering Reservoir Cap

from

$12.52
Power Steering Reservoir Cap

Cardone New – Power Steering Reservoir (Part No.3R-502)

Power Steering Reservoir

from

$50.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:
  • 100% testing ensures leak-free performance
  • Designed to match O.E. fit, function and performance
  • Manufactured from O.E. grade material for strength and durability
  • Resistant to cracking caused by the high temperatures in the engine compartment
  • Reservoirs with integrated filter have the same filtration efficiency as O.E.
See More

Rare Parts – Sway Bar Link (Part No.RP22449)

Sway Bar Link

from

$64.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

APA/URO Parts – P/S Pump Pulley (Part No.M20601883164APA)

P/S Pump Pulley

from

$49.16
P/S Pump Pulley

Rare Parts – Sway Bar Bushing (Part No.RP22397)

Sway Bar Bushing

from

$22.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Dorman – OE Solutions Driveshaft Flex Joint Coupler (Part No.K1006720047DOR)

OE Solutions Driveshaft Flex Joint Coupler

from

$79.82
Restore a smooth ride and easy acceleration with Dorman’s Driveshaft Coupler. Engineered from high-quality rubber for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission or transfer case. Plus, depending on the application, all installation hardware is included for a complete repair.

Product Features:
  • Direct replacement and direct fit Drive Shaft Couplers available (where applicable) for ease of replacement
  • Comes with bolts and washers (where applicable)
  • Easy to install
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K150283)

Rack & Pinion Bellows Kit

from

$26.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

MOOG – Ball Joint (Part No.K80678)

Ball Joint

from

$59.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

Carquest Premium – Molded Return Hose (Part No.40843)

Molded Return Hose

from

$135.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
See More

National – Bearings (Part No.HM89410)

Bearings

from

$11.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Carquest Premium – Engine Coolant Level Sensor (Part No.FFA1003)

Engine Coolant Level Sensor

from

$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Cardone New – Power Steering Pump (Part No.96-147)

Power Steering Pump

from

$197.99
Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:
  • Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
  • Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
  • Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
  • Meets or exceeds O.E. performance.
See More

Cardone – Power Steering Pump (Part No.21-147)

Power Steering Pump

from

$297.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Helping You Find the Right Steering and Chassis Parts for Your BMW 328i xDrive

You love your 328i xDrive. So we’ve made it easier than ever to help you find BMW 328i xDrive Steering and Chassis Parts in our online catalog. Our inventory holds 114 aftermarket and OEM Steering and Chassis Parts for your BMW 328i xDrive, ranging from $1.46 to $596.99.

We offer parts from 16 brands trusted to make quality Steering and Chassis Parts for your BMW 328i xDrive. Before you buy, take some time to read through customer reviews. We currently have 1,046 reviews of BMW 328i xDrive Steering and Chassis Parts from previous customers. Some of the top rated parts include Sway Bar Link with 3.7 stars and Ball Joint with 4.0 stars.

Find your 328i xDrive Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 328i xDrive part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Steering and Chassis Parts Brands for Your BMW 328i xDrive

Our inventory holds Steering and Chassis Parts for your BMW 328i xDrive from 16 trusted brands. You’ll find OEM and aftermarket parts from brands like Cardone, Moog, and Carquest Premium, all of which can keep that BMW happy.
We have Rein parts available for your BMW 328i xDrive in categories like Power Steering Parts. Some of the top-rated Rein parts in these categories are:
Power Steering Reservoir
from $29.99
(1)
Power Steering Reservoir
Power Steering Reservoirs

Top-Rated Cardone Steering and Chassis Parts

Leading Cardone Steering and Chassis Parts

We carry Cardone brand parts for your BMW 328i xDrive across several catalog categories, including Power Steering Parts. Some of our most reviewed Cardone parts include:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $48.49
(2)
Power Steering Filter
Power Steering Filters
Power Steering Pump
from $297.99
(1)
Power Steering Pump
Power Steering Pumps

FAQs for BMW 328i xDrive Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the BMW 328i xDrive?

Out of 114 Steering and Chassis Parts for the BMW 328i xDrive, the most popular in our inventory are:
Power Steering Filter
from $31.99
This product is not rated
Power Steering Filter
Power Steering Filters
Stabilizer Bar Link
from $35.49
This product is not rated
Stabilizer Bar Link
Sway Bar Link Kits
Stabilizer Bar Link
from $35.49
This product is not rated
Stabilizer Bar Link
Sway Bar Link Kits

What are the top-rated BMW 328i xDrive Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your BMW 328i xDrive based on customer reviews/ratings are:
Sway Bar Link
from $37.80
(21)
Sway Bar Link
“n/a”
Ball Joint
from $59.99
(2)
Ball Joint
“I used it for my car and it feels great!”
Power Steering Filter
from $46.99
(1)
Power Steering Filter
“Good filter, works great”