BMW 320i Brake Parts

Essential BMW 320i Brake Parts

ATE – Booster Check Valve (Part No.N4030459144ATE)

Booster Check Valve

from

$43.33
Booster Check Valve

Pierburg – Vacuum Pump (Part No.B7250432793APG)

Vacuum Pump

from

$534.69
Vacuum Pump

ATE – Original Brake Hose (Part No.N700030384ATE)

Original Brake Hose

from

$20.73
Highest mechanical stability under load, highest compressive strength and resistance ATE/Continental has been contributing hydraulic brake hose assemblies for the automotive industry since the 1920’s. With an annual production of approximately 40 million brake hose assemblies, ATE/Continental is one of the world leaders in this sector today. As a full brake system supplier, ATE/Continental distinctively places its direct knowledge of overall hydraulic brake design into this product. The complete OEM experience, coupled with the specialized technology of an OE world market leader, uniquely places ATE/Continental near the top for brake hose assemblies with their ATE brand. ATE brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:
  • More than 70 braiding machines for braid production.
  • Autoclaves or vulcanizing presses, and automatic surface control for the production of the inner and outer rubber layers.
  • Primary use of extruded connectors.
  • Test stands and laboratories are abundantly available for assured accuracy in satisfying the rigid criteria of all customer specifications.
  • Outstanding quality standards with compliance certifications for FMVSS106 on our ATE brake hose assemblies, as well as ISO 14001 certification for production.
  • In-house ATE N standards that exceed the legal requirements. Original ATE Brake hoses – Presentation
See More

Carquest Wearever – Parking Brake Shoes (Part No.S828)

Parking Brake Shoes

from

$35.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

APA/URO Parts – ABS Modulator Insula (Part No.N6055823595APA)

ABS Modulator Insula

from

$2.63
ABS Modulator Insula

Euro Stop – Euro-Stop High-Carbon Coated Rotors, ECE-R90 Brake Pads + Hardware Kit (Part No.ESK6657)

Euro-Stop High-Carbon Coated Rotors, ECE-R90 Brake Pads + Hardware Kit

from

$315.99
Product Features:
  • EuroStop pads have been engineered to meet the strict European ECE-R90 standards – certified OE compatible fitment and performance
  • Rotors coated for optimum anti-corrosion protection
  • High-carbon rotor metallurgy provides improved thermal conductivity to resist distortion and cracking; improved damping coefficient to reduce squeal
  • Rotors manufactured to strict tolerances for DTV and runout for smooth quiet performance
  • Pads manufactured in Europe for European applications
  • ECE-R90 brake pads produce an equivalent amount of brake dust to the OE product. PowerStop also offers lower-dust pad and kit products.
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Includes 1 Rear Sensor Wire
  • Buy with confidence from the originator & industry leader of brake kits
See More

PowerStop – Red Powder Coated Calipers (Part No.S7110)

Red Powder Coated Calipers

from

$344.99
PowerStop Performance Brake Calipers are made specifically with the enthusiast in mind. These calipers bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are remanufactured in our Chicago, IL facility and treated with a electrostatic high-temperature red powder-coating. The easy to clean powder coating helps to resist rust and corrosion thus extending the life of your calipers. PowerStop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. PowerStop caliper pairs are expertly assembled using new seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. The performance color is a nice touch that really stands out behind your wheels!

Product Features:
  • All calipers are thoroughly inspected for quality and safety. Pressure tested to prevent leaks.
  • New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets
  • High temperature EPDM rubber for extended life.
  • Premium silicone lubrication provides smoother operation.
  • The easy to clean powder coating helps to resist rust and corrosion and extends the life of calipers.
See More

ATE – Brake Line Junction (Part No.N3084670625ATE)

Brake Line Junction

from

$20.78
Brake Line Junction

FAE – FAE Stop Light Switch (Part No.P305521113FAE)

FAE Stop Light Switch

from

$26.28
The FAE Stop Light Switch is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Jurid – OE Replacement Brake Pads (Part No.N1010653880JUR)

OE Replacement Brake Pads

from

$188.50
Jurid: Original in OEM This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. Jurid works closely with car and brake manufacturers on brake pads and linings with OE homologation that are designed for specific vehicle types and axles. This and what is virtually a century of experience also explain why we identify ourselves with such a high OEM quality standard. As an OEM and hundred-year-old pioneer of modern brake pads, Jurid have set very high quality standards for the pads, which far exceed the requirements set out in statutory standards such as ELV, REACH and ECE R90. The brake pads that Jurid offers the parts market therefore have outstanding braking performance and service life figures, as well as superb functionality and accuracy of fit to each brake caliper. They also offer impressively low emission values in terms of noise and friction, and are produced using eco-friendly processes.

Product Features:
  • OE-Equivalent and Direct Fit application.
  • Low noise and reduced vibrations.
  • Formulated to OE Specifications.
  • OE style shims included
  • Superior friction qualities.
  • Organic metallic blended compound. BENDIX/JURID BRAKE BROCHURE
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.H4755)

Disc Brake Hardware Kit

from

$2.99
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
  • Manufactured with quality materials to suppress high stress levels
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000425963ZIC)

Coat-Z Brake Disc (Rotor)

from

$156.48
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

PowerStop – Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K6657)

Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver

from

$324.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:
  • This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
  • PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
  • Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Drilled & Slotted performance rotors provide maximum cooling
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
  • Rotors are zinc plated for maximum protection against rust.
  • Includes 1 Rear Sensor Wire
  • Buy with confidence from the originator & industry leader of brake kits
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000425968ZIC)

Coat-Z Brake Disc (Rotor)

from

$98.30
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-6211)

Vacuum Brake Booster: Without Master Cylinder

from

$145.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Carquest Professional Platinum – Brake Pads: With Hardware, Ceramic, Better Performance, Quiet, Less Dust (Part No.PXD1656H)

Brake Pads: With Hardware, Ceramic, Better Performance, Quiet, Less Dust

from

$77.99
Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:
  • Industry-leading number of application specific formulations for maximum performance and extended pad life
  • On-vehicle testing similar to original equipment tests
  • Patented 4-Layer HEX Shim Technology provides quiet braking
  • HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
  • Burnishing compound allows for a faster break-in of pads and rotors
  • PTFE coated hardware and caliper pin grease included for nearly every application
  • Wear sensors included on most European applications that require replacement
  • Powder-coated backing plate prevents corrosion
See More

Pex – Brake Pad Wear Sensor (Part No.N1030267612PEX)

Brake Pad Wear Sensor

from

$6.53
PEX electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at PEX make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.

Product Features:
  • Exact Replacement with OE Fittings and Connectors
  • Resistant to Extreme High Heat
  • Highly Durable
  • Supplied with all required hardware
  • PEX is an OE supplier to Brake and Vehicle Manufacturers
See More

ATE – ATE Wheel Cylinder (Part No.N202019713ATE)

ATE Wheel Cylinder

from

$37.08
ATE wheel cylinders are made in part from extruded aluminum section and are therefore relatively light, resistant to corrosion and to brake fluid, and provide a longer service life than conventional wheel cylinders. ATE Wheel cylinders are subject to extensive safety testing before being added to the range. Tests of sealing at low and at high pressure and of resistance to wear are included. The production is certified to ISO 1400, and, thanks to our strict internal ATE N standard, they significantly exceed the statutory requirement. The grooved ring cup seals consist of EPDM. The surface protection of the wheel cylinder housing contains no Cr-6, and therefore also satisfies the EU end-of-life vehicle directive.

Product Features:
  • Resistant to corrosion and to brake fluid
  • Provides a longer service life
  • Made with high quality EPDM rubber cups and boots for long lasting performance
  • Manufactured to OE Quality specifications
See More

LuK – Clutch Master Cylinder (Part No.LMC454)

Clutch Master Cylinder

from

$152.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Cardone – Brake Caliper (Part No.N1040908295CAR)

Brake Caliper

from

$165.01
Remanufactured Caliper – Manufacturer recommends replacing calipers in pairs. CARDONE brake calipers are remanufactured to match the exact look and function of the original equipment unit. Cardone calipers come ‘friction ready’ allowing you to select your favorite brand of brake pad. Cardone completely disassembles every worn part, also known as a core, and thoroughly clean and inspect every component. Through reverse engineering, Cardone engineers pinpoint original equipment design weaknesses through examining common wear areas and incorporate fixes into our renewal process as needed to produce a highly reliable caliper.

Product Features:
  • OE Quality -Direct fit application
  • 100% O.E.-specific rubber seals ensure like-new performance.
  • 100% pressure testing guarantees proper braking function on the vehicle.
  • Copper washers are included for a perfect seal.
  • Every Friction Choice Caliper consistently includes all hardware needed to ensure quick, convenient installation, while offering you the choice to install your own preferred grade of pads.
  • Friction Choice Calipers are offered with or without mounting bracket, so you can choose the configuration that best meets your needs.
  • New bleeder screws provide trouble-free bleeding and a positive seal.
  • Plastic cap plug in brake port line protects threads before installation.
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.13652)

Disc Brake Hardware Kit

from

$16.49
Brakes are designed as a system and all the parts need to work together for best performance. Changing your clips is important for ensuring that the brake pads are moving in a uniform and stable motion and not moving freely.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Corrosion resistant for long-lasting durability against harsh roads
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5025)

Disc Brake Caliper Guide Pin Kit

from

$7.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Helps deliver a quieter, more efficient braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8217A)

Disc Brake Caliper Guide Pin Boot Kit

from

$15.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Prevents noise and premature wear
  • Provides longer brake life and performance
See More

Economy Black – Disc Brake Caliper Repair Kit (Part No.15439)

Disc Brake Caliper Repair Kit

from

$15.49
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Economy Black – Disc Brake Caliper Repair Kit (Part No.15441)

Disc Brake Caliper Repair Kit

from

$9.99
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Helping You Find the Right Brake Parts for Your BMW 320i

You love your 320i. So we’ve made it easier than ever to help you find BMW 320i Brake Parts in our online catalog. Our inventory holds 113 aftermarket and OEM Brake Parts for your BMW 320i, ranging from $2.63 to $799.99.

We offer parts from 29 brands trusted to make quality Brake Parts for your BMW 320i. Before you buy, take some time to read through customer reviews. We currently have 532 reviews of BMW 320i Brake Parts from previous customers. Some of the top rated parts include Disc Brake Caliper Guide Pin Boot Kit with 5.0 stars and Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield with 5.0 stars.

Find your 320i Brake Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 320i part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Brake Parts Brands for Your BMW 320i

Our inventory holds Brake Parts for your BMW 320i from 29 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest, Carquest Platinum Painted, and Carquest Premium, all of which can keep that BMW happy.

Top-Rated Carquest Wearever Brake Parts

Leading Carquest Wearever Brake Parts

We carry Carquest Wearever brand parts for your BMW 320i across several catalog categories, including Brake Calipers and Brake Rotors and Drums. Some of our most reviewed Carquest Wearever parts include:
Disc Brake Caliper Guide Pin Kit
from $7.49
(35)
Disc Brake Caliper Guide Pin Kit
Brake Caliper Bolt and Pins
Disc Brake Rotor Meets or Exceeds OE Design
from $91.99
(6)
Disc Brake Rotor Meets or Exceeds OE Design
Front Brake Rotors
Disc Brake Rotor Meets or Exceeds OE Design
from $108.99
(2)
Disc Brake Rotor Meets or Exceeds OE Design
Front Brake Rotors

FAQs for BMW 320i Brake Parts

What are the most purchased Brake Parts for the BMW 320i?

Out of 113 Brake Parts for the BMW 320i, the most popular in our inventory are:
Brake Pads: Semi-metallic, Long Life and Quiet
from $52.99
(5)
Brake Pads: Semi-metallic, Long Life and Quiet
Front Brake Pads and Shoes
Brake Pads: Ceramic, Long Life and Quiet
from $53.99
(3)
Brake Pads: Ceramic, Long Life and Quiet
Rear Brake Pads and Shoes

What are the top-rated BMW 320i Brake Parts?

Top-rated Brake Parts for your BMW 320i based on customer reviews/ratings are:
Disc Brake Caliper Guide Pin Boot Kit
from $15.29
(2)
Disc Brake Caliper Guide Pin Boot Kit
“These are overpriced but they are good quality epdm material. They fit tightly as they should. Interestingly most remanned calipers for the 2014 Focus”
Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield
from $95.99
(1)
Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield
“I really didn’t know what you expect with these Carquest Platinum brakes and rotors. But man they surprised me how great they are on my Bmw F30. They”
Brake Hose Assembly: Copper Washers Included
from $20.99
(1)
Brake Hose Assembly: Copper Washers Included
“Though this part is listed as fitting a 1998 volvo V70 FWD, it does not, as this model has metal brake lines. It might be intended for the V70 AWD. Lo”