1980 BMW 320i Brake Parts

Below you will find various in-demand BMW Brake Parts, components and accessories for your 1980 320i. Advance Auto Parts has popular 320i parts like Brake Master Cylinders, Brake Hoses, Wheel Cylinders and more. You’ll also find aftermarket and OEM Brake Parts for other 320i model years including 1981, 1982, 1983, 2013, 2014, 2015, 2016, 2017, 2018 and more. Select a category of 1980 BMW 320i Brake Parts below and start saving instantly.

Popular 1980 BMW 320i Brake Parts Categories

Front Brake Pads and Shoes

Brake Wheel Cylinders

Brake Master Cylinders

Brake Wear Sensors

Brake Hoses

Power Brake Booster Check Valves

Brake Hydraulic Line Junctions

Brake Caliper Kits

Brake Light Fail Switches

Essential Brake Parts for 1980 BMW 320is

from

$37.08

ATE wheel cylinders are made in part from extruded aluminum section and are therefore relatively light, resistant to corrosion and to brake fluid, and provide a longer service life than conventional wheel cylinders. ATE Wheel cylinders are subject to extensive safety testing before being added to the range. Tests of sealing at low and at high pressure and of resistance to wear are included. The production is certified to ISO 1400, and, thanks to our strict internal ATE N standard, they significantly exceed the statutory requirement. The grooved ring cup seals consist of EPDM. The surface protection of the wheel cylinder housing contains no Cr-6, and therefore also satisfies the EU end-of-life vehicle directive.

Product Features:

Resistant to corrosion and to brake fluid
Provides a longer service life
Made with high quality EPDM rubber cups and boots for long lasting performance
Manufactured to OE Quality specifications

from

$20.78

Brake Line Junction

from

$15.49

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$21.62

FAG Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:

Guaranteed factory fit to original equipment specifications
Meets or exceeds original equipment factory safety standards

from

$9.99

This part matches Original Equipment (OE) quality specifications
Increases the life span of the brake pads
Restores brakes to like-new performance
Prevents noise and premature wear
Direct replacement for a proper fit

from

$55.99

Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:

Industry-leading number of application specific formulations for maximum performance and extended pad life
On-vehicle testing similar to original equipment tests
Patented 4-Layer HEX Shim Technology provides quiet braking
HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
Burnishing compound allows for a faster break-in of pads and rotors
PTFE coated hardware and caliper pin grease included for nearly every application
Wear sensors included on most European applications that require replacement
Powder-coated backing plate prevents corrosion

from

$55.99

Industry-leading number of application specific formulations for maximum performance and extended pad life
On-vehicle testing similar to original equipment tests
Patented 4-Layer HEX Shim Technology provides quiet braking
HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
Burnishing compound allows for a faster break-in of pads and rotors
PTFE coated hardware and caliper pin grease included for nearly every application
Wear sensors included on most European applications that require replacement
Powder-coated backing plate prevents corrosion

from

$188.50

Jurid: Original in OEM This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. Jurid works closely with car and brake manufacturers on brake pads and linings with OE homologation that are designed for specific vehicle types and axles. This and what is virtually a century of experience also explain why we identify ourselves with such a high OEM quality standard. As an OEM and hundred-year-old pioneer of modern brake pads, Jurid have set very high quality standards for the pads, which far exceed the requirements set out in statutory standards such as ELV, REACH and ECE R90. The brake pads that Jurid offers the parts market therefore have outstanding braking performance and service life figures, as well as superb functionality and accuracy of fit to each brake caliper. They also offer impressively low emission values in terms of noise and friction, and are produced using eco-friendly processes.

Product Features:

OE-Equivalent and Direct Fit application.
Low noise and reduced vibrations.
Formulated to OE Specifications.
OE style shims included
Superior friction qualities.
Organic metallic blended compound. BENDIX/JURID BRAKE BROCHURE

from

$26.99

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$20.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$20.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$34.52

Safety that you can rely on: CORTECO brake hoses CORTECO offers a full range of brake hoses in original quality with maximum reliability. Brake hoses are used in every car brake system and should be checked during each maintenance job. They are regarded as one of the most important components in vehicle brake systems. Therefore, CORTECO brake hoses are engineered and designed to OE quality standards. Expertise in leading-edge technology ensure the high quality standards of CORTECO brake hoses. CORTECO brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:

High durability
Low volume expansion
100% high pressure tested and certified quality

from

$26.28

The FAE Stop Light Switch is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$6.53

PEX electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at PEX make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.

Product Features:

Exact Replacement with OE Fittings and Connectors
Resistant to Extreme High Heat
Highly Durable
Supplied with all required hardware
PEX is an OE supplier to Brake and Vehicle Manufacturers

from

$37.99

The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:

Triggers a warning light on the dashboard
Should be replaced each time the brake pad is replaced
Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

from

$7.51

Bowa electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads. The engineers at Bowa make certain that all materials, parts and tolerances meet the same high standards as the OE brake sensors they supply to brake manufacturers and auto makers worldwide.

Product Features:

Exact Replacement with OE Fittings and Connectors
Highly Durable and Resistant to Temperatures
Supplied with OE style electrical connectors
Bowa is an OE supplier to Brake and Vehicle Manufacturers

from

$16.79

Triggers a warning light on the dashboard
Should be replaced each time the brake pad is replaced
Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

from

$34.49

BRK PAD SENSOR WIRE

from

$43.33

Booster Check Valve

from

$152.99

Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$284.65

FTE Brake Master Cylinders are manufactured to OE Specifications using both aluminum and iron castings. FTE Brake Master Cylinders are ready to bench bleed and install right out of the box.

Product Features:

Meets the brake performance requirements of SAE J1153 and J1154
Matching Original Equipment Quality
Pressure tested to ensure safe and confident braking
Direct Replacement for Original Part

Upgrade your 1980 BMW 320i with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1980 BMW 320i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Brake Parts are key to keeping your 320i functioning at its best. At Advance Auto Parts, we offer a wide selection of 15 Brake Parts for the 1980 BMW 320i, designed to meet your needs without breaking the bank. From Brake Master Cylinder replacements to Brake Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1980 BMW 320i at great prices. Our Brake Parts inventory for this model ranges from just $6.53 to $284.65, with an average price of $40.70. Our 15 Brake Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 1980 BMW 320i without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1980 BMW 320i, we stock popular OEM and aftermarket Brake Parts from top names like Carquest, and more. Carquest Brake Parts start at just $16.79 and boast an impressive 4 stars average rating from customers. With 1 customer reviews and counting, our 1980 BMW 320i Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1980 BMW 320i is always ready to roll. We’re committed to providing you with everything you need to keep your 320i in top shape, all in one place. Start shopping confidently below for your 1980 BMW 320i!

Best-Selling Brake Master Cylinders for 1980 BMW 320is

Enhance the driving experience in your BMW with 1 quality Brake Master Cylinder components, starting at $284.65.

show more show less

from

$284.65

Meets the brake performance requirements of SAE J1153 and J1154
Matching Original Equipment Quality
Pressure tested to ensure safe and confident braking
Direct Replacement for Original Part

Most Popular 1980 BMW 320i Brake Hoses

Customize your BMW with 4 Brake Hoses products like Brake Hoses, all priced under $26.99.

show more show less

from

$20.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$20.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$26.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$20.73

Highest mechanical stability under load, highest compressive strength and resistance ATE/Continental has been contributing hydraulic brake hose assemblies for the automotive industry since the 1920’s. With an annual production of approximately 40 million brake hose assemblies, ATE/Continental is one of the world leaders in this sector today. As a full brake system supplier, ATE/Continental distinctively places its direct knowledge of overall hydraulic brake design into this product. The complete OEM experience, coupled with the specialized technology of an OE world market leader, uniquely places ATE/Continental near the top for brake hose assemblies with their ATE brand. ATE brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:

More than 70 braiding machines for braid production.
Autoclaves or vulcanizing presses, and automatic surface control for the production of the inner and outer rubber layers.
Primary use of extruded connectors.
Test stands and laboratories are abundantly available for assured accuracy in satisfying the rigid criteria of all customer specifications.
Outstanding quality standards with compliance certifications for FMVSS106 on our ATE brake hose assemblies, as well as ISO 14001 certification for production.
In-house ATE N standards that exceed the legal requirements. Original ATE Brake hoses – Presentation

Top Picks for 1980 BMW 320i Wheel Cylinders

Upgrade BMW 320is with top-quality Wheel Cylinders parts, including 2 OEM and aftermarket selections for your 1980 model.

show more show less

from

$37.08

Resistant to corrosion and to brake fluid
Provides a longer service life
Made with high quality EPDM rubber cups and boots for long lasting performance
Manufactured to OE Quality specifications

from

$21.38

Wheel Cylinder

In-Demand Brake Kits for 1980 BMW 320is

Select from 1 premium Brake Kits parts for your 1980 BMW 320i.

show more show less

from

$21.62

Guaranteed factory fit to original equipment specifications
Meets or exceeds original equipment factory safety standards

Most Sold 1980 BMW 320i Brake Pads and Shoes

Explore our best-selling BMW parts for the 1980 320i among 4 OEM and aftermarket options starting from $6.53.

show more show less

from

$34.87

ATE Original brake pads provide quality friction just like the OE pads they replace, providing customer-pleasing brake performance. With the best mixture of materials on the market and a production process which emphasizes quality all the way through, original ATE brake pads represent the state-of-the-art. In order to prevent noise during braking, highly effective primary and secondary measures are both used on brake pads. Primary measures act directly on the point of friction. Here, the main issue is optimization of the materials used for the relevant parts. In many cases, ATE uses the most effective variant and the best primary measure for noise suppression in the industry: the intermediate layer or underlayer! On the other hand, secondary measures are intended to prevent the structure-borne sound which is produced from reaching the ear of the driver and pedestrians. Secondary measures can generally be divided into four groups: damping plates, damping foils, paints and greases. ATE works with over 150 different mixtures of friction material to ensure that the optimal result is always achieved for any particular application. The friction materials are always being refined and developed for this purpose. The pad material consists of various components which each fulfill different functions during braking

Product Features:

OE engineered brake system technology assures optimum fit and performance
Advanced friction vehicle specific formulations
Reduced dusting and extend pad life
Application matched premium quality friction grade
Underlayer design helps reduce noise, vibration and harshness
Shims, chamfers, slots, wear sensors and other premium features included Original ATE Brake pads – Presentation

from

$16.79

Triggers a warning light on the dashboard
Should be replaced each time the brake pad is replaced
Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

from

$7.51

Exact Replacement with OE Fittings and Connectors
Highly Durable and Resistant to Temperatures
Supplied with OE style electrical connectors
Bowa is an OE supplier to Brake and Vehicle Manufacturers

from

$6.53

Exact Replacement with OE Fittings and Connectors
Resistant to Extreme High Heat
Highly Durable
Supplied with all required hardware
PEX is an OE supplier to Brake and Vehicle Manufacturers

Top-Rated Brake Parts Brands For Your 1980 BMW 320i

Shop for the best-rated brands offering Brake Parts and other products for your 1980 BMW 320is. Below you’ll find some of our best rated Brake Parts from Carquest, and more. Brake Parts from these brands that fit a 1980 320i start at just $16.79 and are rated as high as 4 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 1980 BMW 320i Brake Parts

When it comes to maintaining or upgrading your 1980 BMW 320i, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Brake Parts, specifically designed for the 1980 BMW 320i. With over 4 Carquest brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $16.79, with an average price of just $21.44. Plus, with over 1 customer reviews and an average rating of 4 stars, you can trust that our Carquest Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$26.99

This product is not rated

Brake Hose Assembly: Copper Washers Included

“”

from
$20.99

This product is not rated

Brake Hose Assembly: Copper Washers Included

“”

from
$16.79

This product is not rated

Brake Pad Wear Sensor

“”

FAQs for 1980 BMW 320i Brake Parts

Which Brake Parts are best-sellers for 1980 BMW 320is?

Out of 15 Brake Parts that fit 1980 BMW 320is, the following parts are the top sellers:

Brake Hose Assembly: Copper Washers Included (18650588) – $20.99
Brake Hose Assembly: Copper Washers Included (18650618) – $26.99
Booster Check Valve (11193688) – $43.33

What’s the price range for 1980 BMW 320i Brake Parts?

Brake Part prices for the 1980 BMW 320i start at $6.53 and go up to $284.65 for the most premium parts.

What’s the average price of a Brake Part for a 1980 BMW 320i?

The average price for Brake Parts for the 1980 BMW 320i is $40.70. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other BMW 320i model years?

Yes, we currently carry Brake Parts for 12 model years of BMW 320is between 1977 and 2018. Brake Parts are bought most frequently for the following model years: 2018, 2017, 2016, 2015, 2014, 2013, 1983, 1982, and 1981.

What are the cheapest Brake Parts for my 1980 BMW 320i?

The cheapest 1980 BMW 320i Brake Parts we carry in stock are:

Brake Pad Wear Sensor (10847690) – $6.53
Brake Pad Wear Sensor (11487610) – $7.51
Brake Pad Wear Sensor (18023721) – $16.79
Original Brake Hose (10765145) – $20.73
Brake Line Junction (11528814) – $20.78

What are the top-rated Brake Parts that fit the 1980 BMW 320i?

Out of 1 reviews by customers, our 1980 BMW 320i Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1980 BMW 320i and their top-rated products:

Brake Hoses
- Brake Hose Assembly: Copper Washers Included (18650619) – $20.99

What types of Brake Parts do you sell for my 1980 BMW 320i?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1980 BMW 320i:

Can I get help with 1980 BMW 320i Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Brake Parts and more.

What is your return policy for BMW 320i Brake Parts?

Advance Auto Parts keeps returns simple. For new BMW 320i Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1980 BMW 320i Brake Parts

ATE – ATE Wheel Cylinder (Part No.N202019713ATE)

ATE – Brake Line Junction (Part No.N3084670625ATE)

Economy Black – Disc Brake Caliper Repair Kit (Part No.15439)

FAG – Brake Caliper Repair Kit (Part No.N105046483FAG)

Economy Black – Disc Brake Caliper Repair Kit (Part No.15441)

Carquest Professional Platinum – Brake Pads: With Hardware, Ceramic, Better Performance, Quiet, Less Dust (Part No.PXD1609H)

Carquest Professional Platinum – Brake Pads: With Hardware, Ceramic, Better Performance, Quiet, Less Dust (Part No.PXD1609CH)

Jurid – OE Replacement Brake Pads (Part No.N1010653880JUR)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA116467)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38002)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA113300)

Corteco – CORTECO Brake Hose (Part No.N7000386056CFW)

FAE – FAE Stop Light Switch (Part No.P305521113FAE)

Pex – Brake Pad Wear Sensor (Part No.N1030267612PEX)

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-504546)

Bowa – Brake Pad Wear Sensor (Part No.N1030267612BOW)

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1087)

Carquest Wearever – BRK PAD SENSOR WIRE (Part No.084-1949)

ATE – Booster Check Valve (Part No.N4030459144ATE)

LuK – Clutch Master Cylinder (Part No.LMC454)

FTE – FTE Brake Master Cylinder (Part No.N300019751FTE)

FTE – FTE Brake Master Cylinder (Part No.N300019751FTE)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38002)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA113300)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA116467)

ATE – Original Brake Hose (Part No.N700030384ATE)

ATE – ATE Wheel Cylinder (Part No.N202019713ATE)

Metelli – Wheel Cylinder (Part No.N202019713MTL)

FAG – Brake Caliper Repair Kit (Part No.N105046483FAG)

ATE – Original OE Formuld Brake Pad Set (Part No.N101019703ATE)

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1087)

Bowa – Brake Pad Wear Sensor (Part No.N1030267612BOW)

Pex – Brake Pad Wear Sensor (Part No.N1030267612PEX)