BMW 1 Series M Cooling and Climate Controls

Essential BMW 1 Series M Cooling and Climate Controls

Dorman – Thermostat Assembly: Includes Complete Housing Assembly, 207 Degrees (Part No.902-816)

Thermostat Assembly: Includes Complete Housing Assembly, 207 Degrees

from

$194.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

Behr – Blower Motor Regulat (Part No.R2041441822BEH)

Blower Motor Regulat

from

$137.18
Blower Motor Regulat

Valeo – Air Flap Actuator (Part No.R2046700055VAL)

Air Flap Actuator

from

$124.15
Air Flap Actuator

Carquest Premium – Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack (Part No.T64)

Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack

from

$27.99
Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack

ACM – Heater Core O-Ring Kit (Part No.R3002389082ACM)

Heater Core O-Ring Kit

from

$49.85
ACM is a supplier of Original Equipment quality climate control products.
See More

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.6683)

A/C Condenser and Receiver Drier Assembly

from

$419.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

KAI – Radiator Fan Assembly, 323/328I/Xi Sedan And Coupe (Part No.BM3117101)

Radiator Fan Assembly, 323/328I/Xi Sedan And Coupe

from

$394.99
New Platinum Pro Radiator Fan Assembly, 323/328I/Xi Sedan And Coupe

Product Features:
  • 323/328I/Xi Sedan And Coupe, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C New; w/ Clutch; w/ 7SEU17C Compressor (Part No.T158382)

A/C New; w/ Clutch; w/ 7SEU17C Compressor

from

$765.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – Engine Electric Water Pump: New, Aluminum Housing (Part No.T2322)

Engine Electric Water Pump: New, Aluminum Housing

from

$481.99
This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. All necessary gaskets and seals are included.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
See More

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83077)

A/C Desiccant Bag Kit

from

$32.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

VDO Continental – Electric Water Pump With An Integrated Control Unit (Part No.A2C59514607)

Electric Water Pump With An Integrated Control Unit

from

$519.99
VDO now offers an Electric Water Pump with an integrated Control Unit. VDOs Electric Water Pump is the exact OEM part and manufactured to the highest quality and original equipment specifications. It is identical in fit, form, and function and provides the exact quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation, fit, and performance. Our water pump is built in OE ISO TS certified facilities and manufactured to the highest quality standards. VDO also supplies separately the mounting screws associated with installation of our water pump. The Electric Water Pump is mounted with 3 screws. Please refer to OE application and guidelines for screw selection as three variants exist. With VDO you can count on dependable performance and robust design by being original equipment while still maintaining a competitive price.

Product Features:
  • Precise engine temperature control through variation of coolant volume flow
  • Use of energy meeting the demands
  • Operation independent from main cooling circuit and combustion engine operation
  • Vehicle Specific fit and function
  • Made in ISO certified facilities OEM Product
See More

ACM – A/C Evaporator (Part No.R1130313395ACM)

A/C Evaporator

from

$255.69
ACM is a supplier of Original Equipment quality climate control products.
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Original Equipment – Coolant Level Sensor (Part No.G1050335088OEA)

Coolant Level Sensor

from

$25.60
Coolant Level Sensor

Dorman – Pressurized Coolant Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-334)

Pressurized Coolant Reservoir: Black, Plastic, Original Equipment Replacement

from

$107.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part
  • Ideal solution – engineered for a seamless installation
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Behr – Radiator (Part No.G1000277804BEH)

Radiator

from

$319.08
Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:
  • OE-Equivalent
  • Direct fit for easy installation.
  • High quality corrosion resistant materials.
  • OE Style mounting brackets and hose connections.
  • Mechanically bonded aluminum core.
  • Integrated transmission oil cooler when applicable.
See More

ACM – ACM A/C Expansion Valve (Part No.R1045397112ACM)

ACM A/C Expansion Valve

from

$60.41
The ACM A/C Expansion Valve that is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meet or exceed OEM specifications.
  • Utilizes the factory style fittings and connectors
  • Compatible with R12 and R134a refrigerant. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.
See More

Dorman – Brass Coolant Air Bleeder Screw (Part No.902-404HP)

Brass Coolant Air Bleeder Screw

from

$8.79
This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:
  • Upgraded material – this brass coolant air bleeder screw reduces future maintenance costs by replacing the original equipment plastic screw on specified BMW, Mini, Chrysler, Dodge, Jeep, and Ram vehicles
  • Ideal solution – instead of wasting time wrestling with a deformed plastic screw head, this sturdy brass screw ensures easy, reliable removal and reuse
  • Durable construction – made of quality brass for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Original Equipment – A/C Pressure Switch (Part No.R1054668713OEA)

A/C Pressure Switch

from

$29.54
A/C Pressure Switch

Dorman – Blower Motor Resistor (Part No.973-113)

Blower Motor Resistor

from

$171.99
Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:
  • Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
  • Restores performance – fixes a fan that’s only operating on one speed or not working at all
  • Thoroughly tested – examined and validated to perform safely and effectively
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

ACM – A/C Evaporator Temperature Sensor (Part No.R1071273277ACM)

A/C Evaporator Temperature Sensor

from

$34.47
ACM is a supplier of Original Equipment quality climate control products. Heater / Evaporator Temperature Sensor
See More

ATE – ATE ABS Speed Sensor (Part No.N6030570847ATE)

ATE ABS Speed Sensor

from

$56.25
The ATE OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
See More

Carquest Premium – Thermostat Kit: Gasket Included (Part No.85957)

Thermostat Kit: Gasket Included

from

$185.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • 100% virgin resin material to insure durability
  • 100% leak tested
  • Direct-fit replacement for ease of installation
  • Includes quality thermostat
See More

Mahle – Thermostat Assembly (Part No.G4002282254MAH)

Thermostat Assembly

from

$128.93
Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:
  • OE quality and design
  • Maintenance-free, durable elements
See More

Helping You Find the Right Cooling and Climate Controls for Your BMW 1 Series M

You love your 1 Series M. So we’ve made it easier than ever to help you find BMW 1 Series M Cooling and Climate Controls in our online catalog. Our inventory holds 69 aftermarket and OEM Cooling and Climate Controls for your BMW 1 Series M, ranging from $2.99 to $854.99.

We offer parts from 22 brands trusted to make quality Cooling and Climate Controls for your BMW 1 Series M. Before you buy, take some time to read through customer reviews. We currently have 527 reviews of BMW 1 Series M Cooling and Climate Controls from previous customers. Some of the top rated parts include Thermostatic Fan Control – Preset with 3.0 stars and Coolant Air Bleeder Screw with 3.4 stars.

Find your 1 Series M Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 1 Series M part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Cooling and Climate Controls Brands for Your BMW 1 Series M

Our inventory holds Cooling and Climate Controls for your BMW 1 Series M from 22 trusted brands. You’ll find OEM and aftermarket parts from brands like Permatex, Imperial, and Dorman, all of which can keep that BMW happy.
We have ACM parts available for your BMW 1 Series M in categories like Air Conditioning Parts. Some of the top-rated ACM parts in these categories are:
A/C Evaporator Temperature Sensor
from $34.47
(1)
A/C Evaporator Temperature Sensor
AC Evaporator Anti-Ice Sensors

Top-Rated Permatex Cooling and Climate Controls

Leading Permatex Cooling and Climate Controls

We carry Permatex brand parts for your BMW 1 Series M across several catalog categories, including Engine Cooling Parts. Some of our most reviewed Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for BMW 1 Series M Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the BMW 1 Series M?

Out of 69 Cooling and Climate Controls for the BMW 1 Series M, the most popular in our inventory are:
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
Radiator Fan Motors
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers

What are the top-rated BMW 1 Series M Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your BMW 1 Series M based on customer reviews/ratings are:
Thermostatic Fan Control - Preset
from $38.49
(8)
Thermostatic Fan Control – Preset
“I’ve been using this kit for several years on my off road truck. It’s hooked up to a powerful flex-a-lite fan and handles the load with ease. I have”
Coolant Air Bleeder Screw
from $4.99
(5)
Coolant Air Bleeder Screw
“Fixed the problem in 5mins….no more coolant leaking from my bleeder screw.”
Engine Electric Water Pump: New, Aluminum Housing
from $481.99
(4)
Engine Electric Water Pump: New, Aluminum Housing
“Fixed the problem .”