Audi R8 Belts and Hoses

Essential Audi R8 Belts and Hoses

Dayco – Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (Part No.5050380)

Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count

from

$35.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Driveworks – Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (Part No.380K5)

Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count

from

$19.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 37.5 Long, 5 Rib Count (Part No.5050375)

Poly Rib Belt Serpentine Belt; 37.5 Long, 5 Rib Count

from

$29.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K050380)

Micro-V« Serpentine Drive Belt

from

$35.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Meistersatz – Water Pipe O-Ring (Part No.G2026860201MEI)

Water Pipe O-Ring

from

$2.50
Water Pipe O-Ring

Bando – Multi Rib (Serpentine) Belt (Part No.W100027682BAN)

Multi Rib (Serpentine) Belt

from

$21.22
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W100026398BAN)

Multi Rib (Serpentine) Belt

from

$20.67
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578652ACD)

Professional V-Ribbed Serpentine Belt

from

$88.35
ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
  • Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
  • Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
  • Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
  • Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life
See More

APA/URO Parts – C Clip Retainer (Part No.G2050240713APA)

C Clip Retainer

from

$1.38
C Clip Retainer

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter (Part No.900170A)

Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter

from

$27.99
This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Germany using the O.E. specified split steel pulley design and meets all performance and durability requirements. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Helping You Find the Right Belts and Hoses for Your Audi R8

You love your R8. So we’ve made it easier than ever to help you find Audi R8 Belts and Hoses in our online catalog. Our inventory holds 12 aftermarket and OEM Belts and Hoses for your Audi R8, ranging from $1.38 to $88.35.

We offer parts from 10 brands trusted to make quality Belts and Hoses for your Audi R8. Before you buy, take some time to read through customer reviews. We currently have 350 reviews of Audi R8 Belts and Hoses from previous customers. Some of the top rated parts include Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter with 4.0 stars.

Find your R8 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Audi R8 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Belts and Hoses Brands for Your Audi R8

Our inventory holds Belts and Hoses for your Audi R8 from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Driveworks, Dayco, and Worldpac, all of which can keep that Audi happy.

FAQs for Audi R8 Belts and Hoses

What are the most purchased Belts and Hoses for the Audi R8?

Out of 12 Belts and Hoses for the Audi R8, the most popular in our inventory are:
Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count
from $19.79
(8)
Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count
Serpentine Belts
Radiator Hose Clamp
from $4.22
This product is not rated
Radiator Hose Clamp
Radiator Hose Clamps
C Clip Retainer
from $1.38
This product is not rated
C Clip Retainer
Coolant Hose Connectors

What are the top-rated Audi R8 Belts and Hoses?

Top-rated Belts and Hoses for your Audi R8 based on customer reviews/ratings are:
Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter
from $27.99
(1)
Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter
“I liked the product It fit like it was should easy to put on”