2020 Audi R8 Belts and Hoses

Essential Belts and Hoses for 2020 Audi R8s

Bando – Multi Rib (Serpentine) Belt (Part No.W100027682BAN)

Multi Rib (Serpentine) Belt

from

$21.22
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578652ACD)

Professional V-Ribbed Serpentine Belt

from

$88.35
ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
  • Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
  • Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
  • Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
  • Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W100026398BAN)

Multi Rib (Serpentine) Belt

from

$20.67
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K050380)

Micro-V« Serpentine Drive Belt

from

$35.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Driveworks – Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (Part No.380K5)

Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count

from

$19.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (Part No.5050380)

Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count

from

$35.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Dayco – Poly Rib Belt Serpentine Belt; 37.5 Long, 5 Rib Count (Part No.5050375)

Poly Rib Belt Serpentine Belt; 37.5 Long, 5 Rib Count

from

$29.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Upgrade your 2020 Audi R8 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2020 Audi R8, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Belts and Hoses are key to keeping your R8 functioning at its best. At Advance Auto Parts, we offer a wide selection of 6 Belts and Hoses for the 2020 Audi R8, designed to meet your needs without breaking the bank.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2020 Audi R8 at great prices. Our Belts and Hoses inventory for this model ranges from just $14.27 to $88.35, with an average price of $35.77. Our 6 Belts and Hoses in stock come from 6 trusted brands, so you’re sure to find the right part for your 2020 Audi R8 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 Audi R8, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Driveworks, and more. Dayco Belts and Hoses start at just $35.49 and boast an impressive 5 stars average rating from customers. With 28 customer reviews and counting, our 2020 Audi R8 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2020 Audi R8 is always ready to roll. We’re committed to providing you with everything you need to keep your R8 in top shape, all in one place. Start shopping confidently below for your 2020 Audi R8!

Best-Selling Serpentine and V Belts for 2020 Audi R8s

Enhance the driving experience in your Audi with 6 quality Serpentine and V Belt components, starting at $14.27.

Driveworks – Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (Part No.380K5)

Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count

from

$19.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (Part No.5050380)

Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count

from

$35.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578652ACD)

Professional V-Ribbed Serpentine Belt

from

$88.35
ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
  • Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
  • Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
  • Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
  • Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K050380)

Micro-V« Serpentine Drive Belt

from

$35.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W100027682BAN)

Multi Rib (Serpentine) Belt

from

$21.22
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Worldpac – Drive Belt (Part No.W10001986574API)

Drive Belt

from

$14.27
Drive Belt

Top-Rated Belts and Hoses Brands For Your 2020 Audi R8

Shop for the best-rated brands offering Belts and Hoses and other products for your 2020 Audi R8s. Below you’ll find some of our best rated Belts and Hoses from Dayco and Driveworks, and more. Belts and Hoses from these brands that fit a 2020 R8 start at just $19.79 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2020 Audi R8 Belts and Hoses

When it comes to maintaining or upgrading your 2020 Audi R8, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2020 Audi R8. With over 1 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $35.49. Plus, with over 6 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count
from
$35.49

(6)

Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count

“Good belt”

Popular Driveworks 2020 Audi R8 Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 2020 Audi R8 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2020 R8, Advance Auto Parts carries a full inventory of 1 Driveworks Belts and Hoses. Plus you will be keeping your Audi in peak condition while saving money because prices on these Driveworks Belts and Hoses range up to $19.79, plus, with more than 8 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

FAQs for 2020 Audi R8 Belts and Hoses

Which Belts and Hoses are best-sellers for 2020 Audi R8s?

Out of 6 Belts and Hoses that fit 2020 Audi R8s, the following parts are the top sellers:

What’s the price range for 2020 Audi R8 Belts and Hoses?

Belts and Hose prices for the 2020 Audi R8 start at $14.27 and go up to $88.35 for the most premium parts.

What’s the average price of a Belts and Hose for a 2020 Audi R8?

The average price for Belts and Hoses for the 2020 Audi R8 is $35.77. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Audi R8 model years?

Yes, we currently carry Belts and Hoses for 10 model years of Audi R8s between 2008 and 2021. Belts and Hoses are bought most frequently for the following model years: 2021, 2018, 2017, 2015, 2014, 2012, 2011, 2010, and 2009.

What are the cheapest Belts and Hoses for my 2020 Audi R8?

The cheapest 2020 Audi R8 Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 2020 Audi R8?

Out of 28 reviews by customers, our 2020 Audi R8 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2020 Audi R8 and their top-rated products:

What types of Belts and Hoses do you sell for my 2020 Audi R8?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2020 Audi R8:

Can I get help with 2020 Audi R8 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Belts and Hoses and more.

What is your return policy for Audi R8 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Audi R8 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.