2011 Audi R8 Belts and Hoses
Find Your Specific 2011 Audi R8 Belts and Hoses
Below you will find various in-demand Audi Belts and Hoses, components and accessories for your 2011 R8. Advance Auto Parts has popular R8 parts like Serpentine and V Belts, Engine Cooling Hoses, Pulleys and more. You’ll also find aftermarket and OEM Belts and Hoses for other R8 model years including
2009,
2010,
2012,
2014,
2015,
2017,
2018,
2020,
2021 and more. Select a category of 2011 Audi R8 Belts and Hoses below and start saving instantly.
Popular 2011 Audi R8 Belts and Hoses Categories
Essential Belts and Hoses for 2011 Audi R8s
APA/URO Parts – C Clip Retainer (Part No.G2050240713APA)
from
$1.38
C Clip Retainer
Meistersatz – Water Pipe O-Ring (Part No.G2026860201MEI)
from
$2.50
Water Pipe O-Ring
Bando – Multi Rib (Serpentine) Belt (Part No.W100027682BAN)
from
$21.22
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
Bando – Multi Rib (Serpentine) Belt (Part No.W100026398BAN)
from
$20.67
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578652ACD)
from
$88.35
ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
- Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
- Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
- Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
- Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life
Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter (Part No.900170A)
from
$27.99
This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Germany using the O.E. specified split steel pulley design and meets all performance and durability requirements. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Dayco – Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (Part No.5050380)
from
$35.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
- Made in the USA
Dayco – Poly Rib Belt Serpentine Belt; 37.5 Long, 5 Rib Count (Part No.5050375)
from
$29.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
- Made in the USA
Gates – Micro-V« Serpentine Drive Belt (Part No.K050380)
from
$35.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Driveworks – Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (Part No.380K5)
from
$19.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Upgrade your 2011 Audi R8 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 2011 Audi R8, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Belts and Hoses are key to keeping your R8 functioning at its best. At Advance Auto Parts, we offer a wide selection of 12 Belts and Hoses for the 2011 Audi R8, designed to meet your needs without breaking the bank.
From
Serpentine and V Belt
replacements to
Engine Cooling Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2011 Audi R8 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $1.38 to $88.35, with
an average price of $23.51.
Our 12 Belts and Hoses in stock come from 10 trusted brands, so you’re sure to find the right part for your 2011 Audi R8 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2011 Audi R8, we stock popular OEM and aftermarket Belts and Hoses from top names
like Dayco, Litens, Driveworks, and more.
Dayco Belts and Hoses
start at just $29.99 and boast an impressive 5 stars average rating from customers.
Litens and Driveworks also bring quality to the table, with Belts and Hoses available starting at $19.79, and at an average 5 stars rating.
With 34 customer reviews and counting, our 2011 Audi R8 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2011 Audi R8 is always ready to roll. We’re committed to providing you with everything you need to keep your R8 in top shape, all in one place.
Start shopping confidently below for your 2011 Audi R8!
Best-Selling Serpentine and V Belts for 2011 Audi R8s
Enhance the driving experience in your Audi with 8 quality Serpentine and V Belt components, starting at $14.27.
Driveworks – Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (Part No.380K5)
from
$19.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Dayco – Poly Rib Belt Serpentine Belt; 37.5 Long, 5 Rib Count (Part No.5050375)
from
$29.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
- Made in the USA
Dayco – Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (Part No.5050380)
from
$35.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
- Made in the USA
ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578652ACD)
from
$88.35
ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
- Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
- Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
- Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
- Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life
Gates – Micro-V« Serpentine Drive Belt (Part No.K050380)
from
$35.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Bando – Multi Rib (Serpentine) Belt (Part No.W100027682BAN)
from
$21.22
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
Bando – Multi Rib (Serpentine) Belt (Part No.W100026398BAN)
from
$20.67
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
Worldpac – Drive Belt (Part No.W10001986574API)
from
$14.27
Drive Belt
Most Popular 2011 Audi R8 Engine Cooling Hoses
Customize your Audi with 2 Engine Cooling Hoses products
like Radiator Coolant Hose Flange Seals and
Radiator Hose Clamps, all
priced under $4.22.
MTC – Radiator Hose Clamp (Part No.G2010939603MTC)
from
$4.22
Radiator Hose Clamp
Meistersatz – Water Pipe O-Ring (Part No.G2026860201MEI)
from
$2.50
Water Pipe O-Ring
Top Picks for 2011 Audi R8 Pulleys
Upgrade Audi R8s with top-quality Pulleys parts, including 1 OEM and aftermarket selections for your 2011 model.
Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter (Part No.900170A)
from
$27.99
This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Germany using the O.E. specified split steel pulley design and meets all performance and durability requirements. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
In-Demand Radiator Hoses for 2011 Audi R8s
Select from 1 premium Radiator Hoses parts for your 2011 Audi R8.
APA/URO Parts – C Clip Retainer (Part No.G2050240713APA)
from
$1.38
C Clip Retainer
Top-Rated Belts and Hoses Brands For Your 2011 Audi R8
Shop for the best-rated brands offering Belts and Hoses and other products for your 2011 Audi R8s. Below you’ll find some of our best rated Belts and Hoses from Dayco, Litens, and Driveworks, and more. Belts and Hoses from these brands that fit a 2011 R8 start at just $19.79 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Dayco 2011 Audi R8 Belts and Hoses
When it comes to maintaining or upgrading your 2011 Audi R8, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2011 Audi R8. With over 2 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $29.99, with an average price of just $32.74. Plus, with over 8 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Litens 2011 Audi R8 Belts and Hoses
Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 2011 Audi R8 owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 2011 R8, Advance Auto Parts carries a full inventory of 1 Litens Belts and Hoses. Plus you will be keeping your Audi in peak condition while saving money because prices on these Litens Belts and Hoses range up to $27.99, plus, with more than 1 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$27.99
$27.99
(1)
Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter
“I liked the product
It fit like it was should
easy to put on”
It fit like it was should
easy to put on”
FAQs for 2011 Audi R8 Belts and Hoses
Which Belts and Hoses are best-sellers for 2011 Audi R8s?
Out of 12 Belts and Hoses that fit 2011 Audi R8s, the following parts are the top sellers:
- Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (5063116) – $19.79
- Radiator Hose Clamp (12173124) – $4.22
- C Clip Retainer (10743533) – $1.38
What’s the price range for 2011 Audi R8 Belts and Hoses?
Belts and Hose prices for the 2011 Audi R8 start at $1.38 and go up to $88.35 for the most premium parts.
What’s the average price of a Belts and Hose for a 2011 Audi R8?
The average price for Belts and Hoses for the 2011 Audi R8 is $23.51. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Audi R8 model years?
What are the cheapest Belts and Hoses for my 2011 Audi R8?
The cheapest 2011 Audi R8 Belts and Hoses we carry in stock are:
- C Clip Retainer (10743533) – $1.38
- Water Pipe O-Ring (11831439) – $2.50
- Radiator Hose Clamp (12173124) – $4.22
- Drive Belt (50054442) – $14.27
- Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (5063116) – $19.79
What are the top-rated Belts and Hoses that fit the 2011 Audi R8?
Out of 34 reviews by customers, our 2011 Audi R8 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2011 Audi R8 and their top-rated products:
- Serpentine and V Belts
- Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (5063116) – $19.79
- Poly Rib Belt Serpentine Belt; 38 Long, 5 Rib Count (3290066) – $35.49
- Poly Rib Belt Serpentine Belt; 37.5 Long, 5 Rib Count (3290065) – $29.99
What types of Belts and Hoses do you sell for my 2011 Audi R8?
As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2011 Audi R8:
Can I get help with 2011 Audi R8 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Belts and Hoses and more.
What is your return policy for Audi R8 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Audi R8 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
