from

$23.95

Steering Rack Boot Kit

from

$4.84

Power Steering Seal

from

$60.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Engineered to meet or exceed OE requirements
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$159.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$18.49

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$32.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$29.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Can solve excessive tire wear and steering issues
Part can help bring vehicle back to factory specification
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Loose or worn chassis parts can lead to premature tire wear

from

$48.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$8.99

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$15.42

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$264.99

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

100% replacement of rubber sealing components.
Application of specialized lubricant(s) for extended life.
Finished in protective coating to prevent corrosion and rust.
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

from

$11.49

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$65.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$69.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$59.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$26.86

Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:

Delphi tie rods are fatigue tested to avoid failure
Delphi includes the necessary accessories for a complete job
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

from

$20.99

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

Zinc coated tubes protect against rust and corrosion

from

$9.29

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Forged housing provides exceptional strength and durability
Oxidation film on the surface of the metal protects against corrosion
Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination

from

$234.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features: