Acura Trailer Hitches

Trailer Hitches for Your Acura

Replacing your Acura Trailer Hitches shouldn’t cost you an arm and a leg. That’s why we offer plenty of options for you to choose from, making it easy to find top rated Trailer Hitches brands at a fraction of the cost.

Essential Acura Trailer Hitches

Hopkins – Connector (Part No.46365)

Connector

from

$99.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights. The Short-Proof Power Taillight Converter is also a self-resetting power converter that will reset after the short has been fixed in the trailer wiring, providing extra protection for the vehicle wiring.

Product Features:
  • For Vehicles w/Independent Bulb Turn Signals/Common Bulb System
  • Protects Tow Vehicle Electronics And Itself From Wiring Shorts
  • Self-Resetting
  • Includes 12 Ga. Power Lead Wire
  • Includes Fuse/Fuse Assembly/Splices/Cable Ties
  • Powers Up To 8.0 Amps Per Output
  • Receives Power Directly From The Battery
  • Includes Vehicle Side 4 Flat
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

Hopkins – Trailer Tail Light Converter: Protects Vehicle Electronics, Powers up to 5.0A (Part No.46255)

Trailer Tail Light Converter: Protects Vehicle Electronics, Powers up to 5.0A

from

$70.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.

Product Features:
  • For vehicles equipped with independent bulb turn signals or common bulb systems
  • Protects tow vehicle electronics from wiring shorts
  • Includes 14 ga. power lead wire, fuse & fuse assembly, splices, and cable ties
  • Powers up to 5.0 amps per output
  • Receives power directly from the battery
  • Includes vehicle side 4 flat
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

CURT – Trailer Hitch: 2" Receiver, 4,000 LB Capacity, Installs as low as 30 Mins (Part No.13354)

Trailer Hitch: 2" Receiver, 4,000 LB Capacity, Installs as low as 30 Mins

from

$279.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Acura MDX (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 4,000 lbs. gross trailer weight and 400 lbs. tongue weight
  • Compatible with weight distribution hitch (5,000 lbs. WD / 500 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 2" Receiver, 3,500 LB Capacity, Installs as low as 30 Mins (Part No.13328)

Trailer Hitch: 2" Receiver, 3,500 LB Capacity, Installs as low as 30 Mins

from

$209.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Acura MDX and Honda Pilot (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight
  • Compatible with weight distribution hitch (5,000 lbs. WD / 500 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Husky Towing – Class Iii, Square Tube, 2" Receiver, 6000 Lb Capacity/ 900 Lb Tongue Weight (Part No.69549C)

Class Iii, Square Tube, 2" Receiver, 6000 Lb Capacity/ 900 Lb Tongue Weight

from

$393.99
Husky receiver hitches are design engineered and precision welded with a seamless collar for strength and reliability. Each hitch features an open back receiver for easy cleaning and is protected inside and out with an industry-leading rust-resistant finish. All Husky receiver hitches are rigorously tested to meet SAE J684 standards for safety. With a full line of unique applications, Husky receiver hitches offer a custom fit solution for nearly every vehicle on the road today.

Product Features:
  • Manufactured With A Vehicle-Specific Design For A Custom Fit
  • Precisely-Welded For Superior Strength And Fit
  • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
  • Strengthened With A Welded, Seamless Collar
  • Open-Back Receiver For Easy Cleaning
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity, Installs as low as 30 Mins (Part No.12083)

Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity, Installs as low as 30 Mins

from

$173.99
Whatever the next checkpoint is on your adventure — whether it’s getting your bike on the trail before sunrise or making it to the campground before dark — CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Acura RDX (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4″ receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid A-coat and black powder coat, giving them long-lasting rust and wear resistance.

Product Features:
  • Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Husky Towing – Class Iii, Round Tube, 2" Receiver, 4K Lb Capacity/ 400 Lb Tongue Weight (Part No.69576C)

Class Iii, Round Tube, 2" Receiver, 4K Lb Capacity/ 400 Lb Tongue Weight

from

$441.99
Husky receiver hitches are design engineered and precision welded with a seamless collar for strength and reliability. Each hitch features an open back receiver for easy cleaning and is protected inside and out with an industry-leading rust-resistant finish. All Husky receiver hitches are rigorously tested to meet SAE J684 standards for safety. With a full line of unique applications, Husky receiver hitches offer a custom fit solution for nearly every vehicle on the road today.

Product Features:
  • Manufactured With A Vehicle-Specific Design For A Custom Fit
  • Precisely-Welded For Superior Strength And Fit
  • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
  • Strengthened With A Welded, Seamless Collar
  • Open-Back Receiver For Easy Cleaning
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 30 Mins (Part No.112903)

Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 30 Mins

from

$233.99
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Acura CL, Acura TL and Honda Accord (see application info to verify fitment). The hitch integrates with the vehicle’s frame and provides a useful and dependable 1-1/4″ x 1-1/4″ receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4″ trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you’re headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.

Product Features:
  • Rated to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • 1-1/4″ x 1-1/4″ ball mount features a 3/4″ hole to accept a trailer ball shank
  • Ball mount can be flipped to provide drop or rise for level towing
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 2" Receiver, 4,000 LB Capacity, Installs as low as 30 Mins (Part No.13130)

Trailer Hitch: 2" Receiver, 4,000 LB Capacity, Installs as low as 30 Mins

from

$174.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Acura RDX (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 4,000 lbs. gross trailer weight and 600 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Hopkins – LITE MATE 3-2 CONVTR (Part No.48915)

LITE MATE 3-2 CONVTR

from

$18.79
Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.

Product Features:
  • 60 in. Long
  • Adapts Tow Vehicles Taillight System To The Trailers
  • Powers Up To 2.1 Amps Per Output
  • Double-Molded Weatherproof Design; Includes Dust Cover
  • Corrosion Resistant Terminals
  • Includes Splices And Terminal Grease
  • Complete With Splices And Circuit Tester
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity, Installs as low as 30 Mins (Part No.120833)

Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity, Installs as low as 30 Mins

from

$366.99
A CURT trailer hitch is the key to pursuing your passions, whether you’re taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Acura RDX (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4″ x 1-1/4″ hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4″ trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.

Product Features:
  • Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • 1-1/4″ x 1-1/4″ ball mount features a 3/4″ hole to accept a trailer ball shank
  • Ball mount can be flipped to provide drop or rise for level towing
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 45 Mins (Part No.114553)

Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 45 Mins

from

$332.99
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Acura TSX (see application info to verify fitment). The hitch integrates with the vehicle’s frame and provides a useful and dependable 1-1/4″ x 1-1/4″ receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4″ trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you’re headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.

Product Features:
  • Rated to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • 1-1/4″ x 1-1/4″ ball mount features a 3/4″ hole to accept a trailer ball shank
  • Ball mount can be flipped to provide drop or rise for level towing
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 2" Receiver, 4,000 LB Capacity, Installs as low as 30 Mins (Part No.13154)

Trailer Hitch: 2" Receiver, 4,000 LB Capacity, Installs as low as 30 Mins

from

$321.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Acura RDX (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 4,000 lbs. gross trailer weight and 400 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins (Part No.13098)

Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins

from

$303.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Acura SLX and Isuzu Trooper (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
  • Compatible with weight distribution hitch (6,000 lbs. WD / 600 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 45 Mins (Part No.110853)

Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 45 Mins

from

$302.99
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Acura TSX and Honda Accord (see application info to verify fitment). The hitch integrates with the vehicle’s frame and provides a useful and dependable 1-1/4″ x 1-1/4″ receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4″ trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you’re headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.

Product Features:
  • Rated to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • 1-1/4″ x 1-1/4″ ball mount features a 3/4″ hole to accept a trailer ball shank
  • Ball mount can be flipped to provide drop or rise for level towing
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 45 Mins (Part No.115353)

Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 45 Mins

from

$295.99
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Acura TLX (see application info to verify fitment). The hitch integrates with the vehicle’s frame and provides a useful and dependable 1-1/4″ x 1-1/4″ receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4″ trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you’re headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.

Product Features:
  • Rated to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • 1-1/4″ x 1-1/4″ ball mount features a 3/4″ hole to accept a trailer ball shank
  • Ball mount can be flipped to provide drop or rise for level towing
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 45 Mins (Part No.114963)

Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 45 Mins

from

$242.99
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Acura TL, Acura TSX and Honda Accord (see application info to verify fitment). The hitch integrates with the vehicle’s frame and provides a useful and dependable 1-1/4″ x 1-1/4″ receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4″ trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you’re headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.

Product Features:
  • Rated to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • 1-1/4″ x 1-1/4″ ball mount features a 3/4″ hole to accept a trailer ball shank
  • Ball mount can be flipped to provide drop or rise for level towing
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 45 Mins (Part No.11085)

Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 45 Mins

from

$234.99
However you define adventure — whether it’s climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere — CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Honda Accord and TSX (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4″ receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid A-coat, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.

Product Features:
  • Rated to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 2" Receiver, 3,500 LB Capacity, Installs as low as 30 Mins (Part No.13536)

Trailer Hitch: 2" Receiver, 3,500 LB Capacity, Installs as low as 30 Mins

from

$229.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Acura RDX (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 300 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 3,500 lbs. gross trailer weight and 300 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Draw-tite Hitches – Class II Hitch (Part No.36427)

Class II Hitch

from

$153.99
Class V Trailer Hitch

Product Features:
  • 1-1/4″ Square Receiver Tube Opening
  • Removable Drawbar, Pin and Clip Sold Separately
  • Neat Appearance, All Frame Attachments
  • A-Coat Base with Black Powder Coat Finish
  • Rated up to 3,500 lbs. (GTW) Weight Carrying (WC)
  • Solid All-Welded Construction for Maximum Strength and Safety
  • Custom Built According to Manufacturer & Model Year
  • Ensures Perfect Fit and Top Towing Performance
  • Computer-Aided Design and Fatigue Stress Testing
  • Designed to Withstand Road Abuse Within Specified Capacities
See More

CURT – Powered 3-to-2-Wire Taillight Converter (Part No.56190)

Powered 3-to-2-Wire Taillight Converter

from

$62.99
When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicle’s electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname “taillight converters”. Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution. This CURT electrical converter is designed to convert a 3-wire system to a 2-wire system and provides a standard 4-way flat connector socket to plug in your trailer. It is designed to fit certain years of the Audi Q5 (except hybrid), BMW 328i xDrive sedan, BMW X5 SUV, Infiniti M37x sedan or Mercedes SLK250 (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com).This converter is made with cutting-edge surface-mount technology (SMT) circuitry, featuring electrical components that are mounted directly to the surface of the board rather than being inserted into a series of holes. SMT circuits have longer life cycles, lower resistance, reduced heat generation and are more reliable than through-hole-mounted components.

Product Features:
  • Converts 3-wire vehicle electrical system to standard 2-wire trailer wiring
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Constructed with SMT circuitry for better performance and durability
  • Color-coded wires for easier installation
  • Snap locks included for fast, secure splicing
  • No heavy-duty flasher required
  • Dust cover included to keep connector clean when not in use
See More

Compare Deals on Acura Trailer Hitches

Shop Acura Trailer Hitches today. Advance Auto Parts carries top rated Trailer Hitches brands for your Acura. Search through our selection of popular aftermarket or OEM parts, we are confident you can find the Trailer Hitches deal that will fit your vehicle hassle-free.

Compare before you buy, we offer customer reviews and star ratings on all of our Acura Trailer Hitches. Once you have reviewed your options and selected the deal that fits your budget, all that is left for you to decide is how to have your new Acura parts delivered. You can either have the Trailer Hitches shipped directly to you or you can pick them up at your local Advance Auto Parts store.

Start shopping below and watch your savings grow!