Name: AT Cooling Hose
Brand: ACDelco
SKU: J2000576930ACD
Price: 60.79 USD

from

$60.79

AT Cooling Hose

from

$33.49

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$30.49

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning
Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
Elasticity allows for long-lasting performance and proper tension

from

$24.49

HVAC heater hose connectors fail when the plastic material fatigues from heat and vibration. This upgraded Dorman OE FIX replacement connector is made from corrosion-resistant stainless steel for greater durability.

Product Features:

Improved design – this HVAC heater hose connector has been redesigned for greater durability the original equipment part
Durable construction – this heater hose connector is made of stainless steel instead of the original equipment connector to reduce damage from heat fatigue and vibration
Easy to install – matches the original equipment form and dimensions for a simple replacement
Quality tested – this part has undergone try-on, corrosion, heat and pressure testing to ensure a quality fit and long service life

from

$21.99

The O-rings in this radiator coolant hose O-ring kit are designed to match the fit and function of original equipment O-rings on specified vehicles and are engineered to help securely seal hose connections when an existing O-ring has failed.

Product Features:

Direct replacement – this O-ring matches the fit and function of the original O-ring on the factory-updated version of the lower heater hose on 2014-06 GM vehicles
Cost-effective repair – inexpensive alternative to dealership forcing an entire hose replacement just to replace an O-ring
Application specific – engineered to fit only the updated OEM radiator hose on specified vehicles; it will not fit the lower radiator hose that was factory-installed on 2014-06 Chevrolet and GMC vehicles
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$41.99

Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair..

Product Features:

Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles.
Durable construction – made of fuel-resistant materials to reduce future failure potential
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$0.99

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$113.99

This replacement fuel injector line is precision-engineered to match the fit and design of the original fuel injector line on specific vehicles. It comes with any vehicle-specific mounting hardware for a complete installation.

Product Features:

Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles
Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership

from

$105.99

GM Genuine Parts Fuel Supply Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$85.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$280.99

GM Genuine Parts Fuel Feed and Return Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$1.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$29.99

Fixing a failed original plastic coolant hose connector usually requires replacing the entire coolant hose assembly. This Dorman OE FIX coolant hose connector is made from aluminum for greater durability and saves expense by allowing the replacement of just the failed connector..

Product Features:

Saves money – directly replace a failed coolant hose connector rather than buying an entire new hose assembly from the original automaker.
Improved design – made of durable aluminum instead of plastic to better resist temperature fluctuations and help prevent future failures
Ensures fit – includes hose clamps for a complete repair and perfect fit on specified makes, models and years
Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

from

$72.99

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$30.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$44.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$25.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$49.49

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$56.99

Fuel injector return line kit includes fuel line, injector fittings, fitting seals and retaining clips. Services one side of engine.

Product Features:

Includes fuel return line
Includes 4 plastic injector return fittings
Includes 4 metal fitting clips
Includes 4 fitting O-rings
Premium OE quality materials
Services one side of engine

from

$16.31

The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$40.99

This pulley is manufactured by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications for newer Buick 2.0L and 2.4L engine applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is produced based on the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Applications include G.M.. This pulley assembly Includes a new mounting bolt as well as a new washer/dust shield for ease of installation. Crosses to OE# 12605492 and others. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance.
Includes all mounting hardware – Bolt and large metal dust shield.
Pulley Assemblies save time and ensure “like new” performance
Running surface designed and engineered for proper belt tracking.
70.0mm O.D.; 16.0mm I.D; 30.8mm smooth running surface; steel. For use with a 6- rib serpentine belt. Includes bolt, 2 dust shields, and retainer.

from

$38.49

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$21.29

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$54.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$246.99

This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions.

Product Features:

Ready to install – these braided stainless steel and PTFE flexible fuel lines are already cut to specific length for standard cab GMC Sierra and Chevy Silverado pickups, with all brackets and connectors
Full length – these lines are made to the correct length for the specified vehicle, but flexible so they’re easier to route than rigid lines, saving replacement time
Upgraded materials – high-strength, corrosion-resistant braided stainless steel protects PTFE hoses for reliable longevity under all conditions
Trustworthy quality – engineered and assembled in the United States and backed by decades of aftermarket experience

from

$451.99

Original equipment fuel lines often leak due to rust and corrosion. This Dorman OE FIX kit includes upgraded stainless steel fuel lines that increase durability. They are also pre-formed to fit specific vehicles for easier installation.

Product Features:

Stainless Steel Fuel Line Kit
Stainless Steel Fuel Line Kit
Original equipment fuel lines often leak due to rust and corrosion. This Dorman OE FIX kit includes upgraded stainless steel fuel lines that increase durability. They are also pre-formed to fit specific vehicles for easier installation.
Upgraded replacement – the replacement fuel lines in this kit are made of stainless steel for added corrosion resistance
Pre-formed fit – these lines are already shaped to fit specific applications for easier installation

from

$492.99

Original equipment fuel lines often leak due to rust and corrosion. This Dorman OE FIX kit includes upgraded stainless steel fuel lines that increase durability. They are also pre-formed to fit specific vehicles for easier installation.

Product Features:

Stainless Steel Fuel Line Kit
Stainless Steel Fuel Line Kit
Original equipment fuel lines often leak due to rust and corrosion. This Dorman OE FIX kit includes upgraded stainless steel fuel lines that increase durability. They are also pre-formed to fit specific vehicles for easier installation.
Upgraded replacement – the replacement fuel lines in this kit are made of stainless steel for added corrosion resistance
Pre-formed fit – these lines are already shaped to fit specific applications for easier installation

2008 GMC Sierra 3500 HD Belts and Hoses

More 2008 GMC Sierra 3500 HD Belts and Hoses Categories

Essential 2008 GMC Sierra 3500 HD Belts and Hoses

ACDelco – AT Cooling Hose (Part No.J2000576930ACD)

Dayco – Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 29 1/2 Inch Length (Part No.86836)

Dayco – Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required (Part No.4PK888EE)

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (Part No.800-409HP)

Dorman – Lower Radiator Hose O-Ring (Part No.926-160)

Dorman – Fuel Filler Neck Hose (Part No.573-159)

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.25" Inside Diameter (Sold by foot) (Part No.28407)

Dorman – Right Diesel Return Line (Part No.904-122)

GM Genuine Parts – Fuel Feed Hose (Part No.10381608)

Dayco – Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (Part No.89259)

GM Genuine Parts – Fuel Feed, Vapor, and Return Hose Assembly (Part No.15946199)

Felpro – Multi-Purpose O-Ring (Part No.35759)

Dorman – Help – Coolant Hose Junction (Part No.47157)

Dorman – Engine Oil Cooler Line (Part No.625-501)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth (Part No.89006)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.50" Diameter (Part No.E71990)

Yukon Gear – Seal Puller Tool (Part No.56063)

Gates – Premium Molded Coolant Hose (Part No.23227)

Dayco – Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set (Part No.5040378K1)

Carquest Premium – Fuel Injector Return Hose Kit (Part No.AL004)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100027998MBL)

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 70 mm Diameter (Part No.900882A)

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 76mm Dia., 30mm Width, Smooth (Part No.89165)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 36 Inch Length (Part No.80405)

Dorman – Molded Heater Hose: Rubber (Part No.626-619)

Dorman – OE Fix Stainless Steel Fuel Line Kit: 9.5 mm ID, 89"; 75" Long (Part No.819-816)

Dorman – Stainless Steel Fuel Line Kit (Part No.919-845)

Dorman – Stainless Steel Fuel Line Kit (Part No.919-874)

Popular 2008 GMC Sierra 3500 HD Belts and Hoses Categories

2008 GMC Sierra 3500 HD Belts and Hoses

Top-Rated Belts and Hoses Brands For Your 2008 GMC Sierra 3500 HD

Popular Felpro Belts and Hoses

Top-Rated Dayco Belts and Hoses

FAQs for 2008 GMC Sierra 3500 HD Belts and Hoses

What are the most purchased Belts and Hoses for the 2008 GMC Sierra 3500 HD?

What are the top-rated 2008 GMC Sierra 3500 HD Belts and Hoses?

More Popular Parts for All Makes