Acura RDX Power Steering Parts

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

• 100% replacement of rubber sealing components.
• Application of specialized lubricant(s) for extended life.
• Finished in protective coating to prevent corrosion and rust.
• Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

Covered in black Hypalon

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

• Transmission cooler reinstallation kit
• Contains part numbers 248001, 226201, 240250 and 4 hose clamps
• Provides all hardware for reinstallation of Imperial transmission coolers
• Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

• Zinc coated tubes protect against rust and corrosion

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

• Zinc coated tubes protect against rust and corrosion

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:

• Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
• Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
• Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
• Meets or exceeds O.E. performance.

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

• All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
• All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
• Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
• Units are supplied with 100% tested and calibrated pressure relief valves.
• Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Protects Rack & Pinion surfaces from contamination
• Hardware included

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Manufactured using premium materials
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features

Steering Rack Boot K

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Transmission oil cooler hose
• 11/32″ x 4-1/2′
• Designed for transmission fluid applications
• Made for tight-radius applications found in transmission cooler installations
• Compatible with 11/32 in. OEM cooler systems
• Tube made of black chemigum (nitrile)
• Reinforced with 2-spiral synthetic
• Covered in black Hypalon
• Compatible with 11/32 in. OEM cooler systems
• Tube made of black chemigum (nitrile)
• Reinforced with 2-spiral synthetic
• Covered in black Hypalon

Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose and line assembly
• SAE J188 compliant high pressure rubber compound hose with internal noise absorber
• SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:

• Original Equipment fit, form and function
• Manufactured from premium raw materials
• Premium OE design
• Right fit the first time
• For European vehicles

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
• Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.