2025 Ford Car Parts

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Anchor 2557 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1987-2022
• Weight approx: 4 Lbs
• Mount Holes On Center: 5.5 In. /139.7 mm
• Studs On Center: 2.70 Inch/68.58 Mm
• Height: 2.7 Inch/68.58 Mm
• Studs And Mount Offset: 0.25 Inch/6.1 Mm

Anchor 3445 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2008-2022
• Weight approx: 7 Lbs

Anchor 3465 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2011-2022
• Weight approx: 9 Lbs

Anchor 3294 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2011-2022
• Weight approx: 2 Lbs

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

• Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
• The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
• Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.

The Motorcraft Speed Sensor Assembly is the transmission-mounted induction coil that creates an electrical signal as the teeth of an internal rotating transmission ring/gear spin past it.

Product Features:

• The sensor’s signal generated communicates the vehicle’s speed to the electronic engine control (EEC) module as well as to the instrument panel speedometer gauge.
• Every Motorcraft Speed Sensor Assembly is engineered and manufactured to demanding Ford OE specifications, ensuring O.E. quality and performance for this key vehicle component.

TCR was established by a group of industry veterans determined to create a torque converter company that puts customers and people first. Our people have the values, knowledge, and experience to provide our customers with great products and personal service. Our products are built by highly skilled professionals with decades of experience. Our product line includes automotive, heavy duty and high performance converters for all makes and models.

Product Features:

• TCR ensures the highest quality with its remanufactured torque converters utilizing O.E. bearing and new seals when possible.
• TCR automotive, heavy duty and high performance converters are built by professionals with decades of experience.

aFe POWER’s Pro Series transmission pan brings performance engineering to the protection of your truck’s transmission. The Pro Series transmission pan is constructed out of durable die-cast aluminum with reinforced ribs inside and out for maximum strength and heat transfer. This cover fits the Ford 10R60 and 10R80 transmissions. This Transmission pan has an increased fluid capacity of approximately 2.3 quarts over stock for better performance over a longer duration. Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling. Transmission pan comes with necessary hardware for installation. This pan incorporates a magnetic drain plug to capture loose particles for maximum protection.

Product Features:

• Constructed out of durable, die-cast aluminum
• Black Powder Coat with Machined Fins
• Neodymium magnetic drain plug is used for maximum gear protection
• Extra Capacity Provides Better Cooling While Towing
• Fits Ford Trucks and SUVs with 10R60 or 10R80 Transmissions

Product Features:

• This mount supports the transmission and dampens vibration.
• Natural and SBR rubber provide maximum life and performance.
• Steel fasteners are heat treated grade 5 bolts.
• A special bonding agent is used to ensure a rubber to metal bond.
• Rubber material is mixed to specific Durometer, hardness.
• Limited Warranty.

Anchor 3425 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2011-2022
• Weight approx: 7 Lbs

This mount supports the transmission and dampens vibration. All mounts are engineered and designed to OEM standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality. Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance, aging stability to ensure maximum life, and performance. Any included fasteners are hardened steel with heat treated Grade 5 bolts. Chemlock bonding agent is used to ensure a superior rubber-to-metal bond. All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements. Hydraulic Mounts, applicable where OE, are engineered for high vibration and torque applications and filled with special hydraulic fluid to dampen excess noise and vibration.

Product Features:

• This mount supports the transmission and dampens vibration.
• Natural and SBR rubber provide maximum life and performance.
• Steel fasteners are heat treated grade 5 bolts.
• A special bonding agent is used to ensure a rubber to metal bond.
• Rubber material is mixed to specific Durometer, hardness.
• Limited Warranty.
• All mounts are specifically engineered and designed to OE standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality.
• Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance and aging stability to ensure maximum life and performance.
• Any included fasteners are hardened steel with heat treated Grade No. 5 bolts.
• Chemlock bonding agent is used to ensure a superior rubber-to-metal bond.
• All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements.
• Hydraulic Mounts, applicable where OE, are specifically engineered for high vibration and torque applications and are filled with special hydraulic fluid to dampen excess noise and vibration.

This automatic transmission oil cooler is designed to match the function of an original cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion, or damage.

Product Features:

• Direct replacement – this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle
• Ideal solution – engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Anchor 3466 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2017-2022
• Weight approx: 9 Lbs

ABS WHEEL SPEED SENS

Product Features:

• This mount supports the transmission and dampens vibration.
• Natural and SBR rubber provide maximum life and performance.
• Steel fasteners are heat treated grade 5 bolts.
• A special bonding agent is used to ensure a rubber to metal bond.
• Rubber material is mixed to specific Durometer, hardness.
• Limited Warranty.
• All mounts are specifically engineered and designed to OE standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality.
• Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance and aging stability to ensure maximum life and performance.
• Any included fasteners are hardened steel with heat treated Grade No. 5 bolts.
• Chemlock bonding agent is used to ensure a superior rubber-to-metal bond.
• All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements.
• Hydraulic Mounts, applicable where OE, are specifically engineered for high vibration and torque applications and are filled with special hydraulic fluid to dampen excess noise and vibration.

This mount supports the transmission and dampens vibration. All mounts are engineered and designed to OEM standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality. Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance, aging stability to ensure maximum life, and performance. Any included fasteners are hardened steel with heat treated Grade 5 bolts. Chemlock bonding agent is used to ensure a superior rubber-to-metal bond. All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements. Hydraulic Mounts, applicable where OE, are engineered for high vibration and torque applications and filled with special hydraulic fluid to dampen excess noise and vibration.

Product Features:

• This mount supports the transmission and dampens vibration.
• Natural and SBR rubber provide maximum life and performance.
• Steel fasteners are heat treated grade 5 bolts.
• A special bonding agent is used to ensure a rubber to metal bond.
• Rubber material is mixed to specific Durometer, hardness.
• Limited Warranty.
• All mounts are specifically engineered and designed to OE standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality.
• Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance and aging stability to ensure maximum life and performance.
• Any included fasteners are hardened steel with heat treated Grade No. 5 bolts.
• Chemlock bonding agent is used to ensure a superior rubber-to-metal bond.
• All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements.
• Hydraulic Mounts, applicable where OE, are specifically engineered for high vibration and torque applications and are filled with special hydraulic fluid to dampen excess noise and vibration.

Product Features:

• This mount supports the transmission and dampens vibration.
• Natural and SBR rubber provide maximum life and performance.
• Steel fasteners are heat treated grade 5 bolts.
• A special bonding agent is used to ensure a rubber to metal bond.
• Rubber material is mixed to specific Durometer, hardness.
• Limited Warranty.

This mount supports the transmission and dampens vibration. All mounts are engineered and designed to OEM standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality. Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance, aging stability to ensure maximum life, and performance. Any included fasteners are hardened steel with heat treated Grade 5 bolts. Chemlock bonding agent is used to ensure a superior rubber-to-metal bond. All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements. Hydraulic Mounts, applicable where OE, are engineered for high vibration and torque applications and filled with special hydraulic fluid to dampen excess noise and vibration.

Product Features:

• This mount supports the transmission and dampens vibration.
• Natural and SBR rubber provide maximum life and performance.
• Steel fasteners are heat treated grade 5 bolts.
• A special bonding agent is used to ensure a rubber to metal bond.
• Rubber material is mixed to specific Durometer, hardness.
• Limited Warranty.
• All mounts are specifically engineered and designed to OE standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality.
• Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance and aging stability to ensure maximum life and performance.
• Any included fasteners are hardened steel with heat treated Grade No. 5 bolts.
• Chemlock bonding agent is used to ensure a superior rubber-to-metal bond.
• All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements.
• Hydraulic Mounts, applicable where OE, are specifically engineered for high vibration and torque applications and are filled with special hydraulic fluid to dampen excess noise and vibration.

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• O-rings or seals are included (where applicable)
• Weather-tight connectors prevent leaks and corrosion for longer life
• Includes all necessary brackets and grommets for easier installation
• Extensive design validation testing and 100% end-of-line tested
• Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

This mount supports the transmission and dampens vibration. All mounts are engineered and designed to OEM standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality. Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance, aging stability to ensure maximum life, and performance. Any included fasteners are hardened steel with heat treated Grade 5 bolts. Chemlock bonding agent is used to ensure a superior rubber-to-metal bond. All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements. Hydraulic Mounts, applicable where OE, are engineered for high vibration and torque applications and filled with special hydraulic fluid to dampen excess noise and vibration.

Product Features:

• This mount supports the transmission and dampens vibration.
• Natural and SBR rubber provide maximum life and performance.
• Steel fasteners are heat treated grade 5 bolts.
• A special bonding agent is used to ensure a rubber to metal bond.
• Rubber material is mixed to specific Durometer, hardness.
• Limited Warranty.
• All mounts are specifically engineered and designed to OE standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality.
• Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance and aging stability to ensure maximum life and performance.
• Any included fasteners are hardened steel with heat treated Grade No. 5 bolts.
• Chemlock bonding agent is used to ensure a superior rubber-to-metal bond.
• All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements.
• Hydraulic Mounts, applicable where OE, are specifically engineered for high vibration and torque applications and are filled with special hydraulic fluid to dampen excess noise and vibration.

No matter what the application, there is a unique Motorcraft and Ford Part designed, manufactured and comprehensively tested to perform to exacting Ford specifications and quality standards, including Key Life testing to the equivalent of 10-years / 150,000 miles for passenger cars and light trucks.

Product Features:

• Backed by the Motorcraft Service Parts, unlimited mileage, limited labor cost and no commercial exceptions. Warranty is supported nationwide by Ford/Lincoln dealers and Ford Authorized Distributors.
• The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.
• Motorcraft kits are the only pigtails recommended by Ford Motor Company.
• Each pigtail kit includes everything needed to make a complete repair; including: Wiring pigtail; Heat shrink tubing; Butt splices.
• All Pigtail kits include OE connectors.
• Motorcraft offers nearly 900 pigtail kits which meet strict Ford engineering specifications and are designed to repair factory harnesses with factory componentry.

This automatic transmission shifter cable lever is designed to match the fit and function of the original lever on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this automatic transmission shifter cable lever is designed to match the fit and function of the original lever
• Restores functionality – reliable replacement for an original part that has failed due to corrosion
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust
• Includes all the parts necessary to complete the repair unless otherwise noted

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
• SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

• Provides proper seal to ensure leak prevention
• Stops engine blow by
• High quality construction
• Meets all OEM specifications

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
• SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

This engine harmonic balancer bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this engine harmonic balancer bolt matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• SUPERIOR SEAL – Manufactured with rubber compounds to help ensure a consistent and long-life seal
• PRECISE DESIGN – Engineered to work with the embossed cover and pan flanges
• PREVENTS OVERTIGHTENING – Features compression limiters incorporated into the design to help eliminate overtightening (application specific)
• OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Application specific design to ensure a perfect fit
• Meets or exceeds all original equipment specifications
• Engineered and manufactured specifically for repair applications
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Engineered with technology that provides increased accuracy with a stronger, more consistent signal
• Sensors are based on proven hall effect and variable reluctance technology
• Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
• O-rings and seals are included if required.
• Weather-tight connectors prevent leaks and corrosion for better reliability.
• Extensive design validation testing and 100% end-of-line tested.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

The only parts recommended by Ford Motor Company for Ford and Lincoln vehicles. Motorcraft Seals are designed and tested to Ford’s rigorous engineering standards. Motorcraft parts fit right the first time for quicker, easier installation.

Anchor 3371 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2007-2022
• Weight approx: 7 Lbs

Anchor 3250 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2005-2022
• Weight approx: 4 Lbs
• Hydraulic
• Part Group: 3250, 3250

Anchor 3372 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2007-2022
• Weight approx: 9 Lbs

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.

Product Features:

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
• Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
• Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Road tested to ensure real world performance and to verify that each design meets our high standards for quality
• Coating salt spray tested for over 200 hours to insure durability

Carquest Premium crankshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Engineered with technology that provides increased accuracy with a stronger, more consistent signal
• Sensors are based on proven hall effect and variable reluctance technology
• Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
• O-rings and seals are included if required.
• Weather-tight connectors prevent leaks and corrosion for better reliability.
• Extensive design validation testing and 100% end-of-line tested.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

DENSO’s camshaft position sensors are manufactured to the strictest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s camshaft position sensors offer leading edge sensing technology which helps control ignition timing more precisely.

Product Features:

• OE technology adapted for the aftermarket
• Reduces emissions, increased performance
• Delivers the highest reliability and detection accuracy

The Engine Cylinder Head Temperature Sensor provides an input to the engine control module concerning the engine operating temperature. Similar to the engine coolant temperature sensor input, the engine control module will make engine operating condition changes based on engine temperature.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Application matched components ensures system operation in like new condition.

aFe Power’s new engine oil pan brings performance engineering to the protection of your Ford Super Duty F-250/F-350 w/ Power Stroke turbo diesel engines. This oil pan is constructed out of durable A356 cast aluminum with machined fins for maximum strength and styling. This cover incorporates a magnetic drain plug to capture loose particles for maximum engine protection. All necessary hardware is included for a hassle-free installation. Built-in External and Internal Fins: Built-in External and Internal fins transfer heat from the fluid to the outside air for maximum cooling. Magnetic Drain Plug: This system incorporates a magnetic drain plug that captures loose particles for maximum engine protection. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:

• Constructed of Durable A356 Cast Aluminum
• Raw Finish w/Machined Fins
• Reinforcing Ribs
• Magnetic Drain Plug Captures Loose Particles

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

• Designed as premium OEM replacement balancers for serpentine and V-belt drives
• Manufactured with ductile iron casting and injection bonded dampening rubber
• Engineered to offer superior bonding strength between the balancer rings

BladeRunner 3" Aluminum Hot and Cold Charge Pipe Kit, Black

aFe POWER BladeRunner Charge Pipes feature smooth transitions in the mandrel-bent aluminum pipes to decrease turbulence and minimize pressure loss, lowering operating temperatures and increasing power. The factory-style billet aluminum quick-connect adaptors with O-ring seals ensure a leak-free fit while maintaining superior strength and durability. The premium stainless-steel hardware and heavy-duty 5-ply polyester reinforced silicone couplings are designed to withstand high vibration and heat tolerance for an added security. Finished in a powder coated surface and laser-etched aFe POWER logo the charge pipes provide a custom look.

aFe POWER BladeRunner Charge Pipes feature smooth transitions in the mandrel-bent aluminum pipes to decrease turbulence and minimize pressure loss, lowering operating temperatures and increasing power. The factory-style billet aluminum quick-connect adaptors with O-ring seals ensure a leak-free fit while maintaining superior strength and durability. The premium stainless-steel hardware and heavy-duty 5-ply polyester reinforced silicone couplings are designed to withstand high vibration and heat tolerance for an added security. Finished in a powder coated surface and laser-etched aFe POWER logo the charge pipes provide a custom look.

aFe POWER BladeRunner Charge Pipes feature smooth transitions in the mandrel-bent aluminum pipes to decrease turbulence and minimize pressure loss, lowering operating temperatures and increasing power. The factory-style billet aluminum quick-connect adaptors with O-ring seals ensure a leak-free fit while maintaining superior strength and durability. The premium stainless-steel hardware and heavy-duty 5-ply polyester reinforced silicone couplings are designed to withstand high vibration and heat tolerance for an added security. Finished in a powder coated surface and laser-etched aFe POWER logo the charge pipes provide a custom look.

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel, SmartSeal clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durabilityFinished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.

Product Features:

• Free-flowing, heat-resistant aluminum charge pipes
• TIG-Welded 2-1/4″ Hot Side and 2-3/4″ Cold Side Aluminum Pipes
• Features Premium Stainless-Steel SmartSeal Clamps And 5-Ply Silicone Couplings
• 1/8″ NPT Ports are Provided for Connecting Sensors or Water Methanol Injection
• Powder Coated Wrinkle Black for Heat and Corrosion Resistance

BladeRunner 3" Aluminum Hot Charge Pipe, Black

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This charge pipe kit also features factory style billet aluminum quick-connect adaptor with O-ring seal to ensure a leak-free fit while maintaining superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.

aFe Power’s new engine oil pan brings performance engineering to the protection of your Ford Super Duty F-250/F-350 w/ Power Stroke turbo diesel engines. This oil pan is constructed out of durable A356 cast aluminum with machined fins for maximum strength and styling. This cover incorporates a magnetic drain plug to capture loose particles for maximum engine protection. All necessary hardware is included for a hassle-free installation. Built-in External and Internal Fins: Built-in External and Internal fins transfer heat from the fluid to the outside air for maximum cooling. Magnetic Drain Plug: This system incorporates a magnetic drain plug that captures loose particles for maximum engine protection. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:

• Constructed of Durable A356 Die Cast Aluminum
• Wrinkle Black Powder coat Finish w/Machined Fins
• Reinforcing Ribs
• Magnetic Drain Plug Captures Loose Particles

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Manufactured to fit a specific application
• Ensures that oil is evenly distributed in the engine system
• Each oil pump is tested for pressure and flow under conditions designed to duplicate actual engine operating conditions before leaving plant
• Every pump is engineered, manufactured and assembled to the highest material and production standards
• Utilizes ISO & QS certified manufacturing

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and a heavy-duty, 5-ply, polyester reinforced silicone coupling. This charge pipe kit also features factory style billet aluminum quick-connect adaptor with O-ring seal to ensure a leak-free fit while maintaining superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function
• Contains all gaskets and seals to remove and replace exhaust manifold

Configure your 2024 Mustang GT for the sound you want, when you want it! MagnaFlow’s premium performance exhaust offering, the xMOD Series, provides an unrivaled exhaust experience! The MagnaFlow 2024 Ford Mustang GT xMOD Series Cat-Back Performance Exhaust System 19646 offers a completely modular exhaust system with all the benefits a MagnaFlow premium exhaust is known for: limited warrantied stainless-steel construction, all-new dyno-proven performance chambered mufflers and fast-flowing mandrel bent pipes. xMOD Muffler Module features a straight-through H core design resonator, and race bred v-band clamps for quick installation and removal. Easily switch from the deep, aggressive signature MagnaFlow exhaust note to the wild straight-pipe race car sound offered by the xMOD xTreme Delete H-Pipe. xMOD xTreme Delete H-Pipe for the Mustang comes equipped with the same race bred v-bands which allow removal of the muffler module for that unmatched xMOD xTreme sound experience. Please check to ensure compliance with local noise regulations.

Product Features:

• No-Drone-Technology (NDT) allows for a quiet cabin
• xTreme Delete Modules for a straight-pipe setup
• Configurable sound from mild to wild

The MagnaFlow 2024 Ford Mustang GT Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This Ford Mustang cat-back exhaust kit is designed to enhance your 5.0L 2024 Ford Mustang GT with dyno-proven performance made possible thanks to a resonator-delete H-pipe, fast-flowing mandrel bent 3in. diameter piping that passes 2 all-new dyno-proven performance chambered mufflers ending in a quad split rear exit with 4in. welded-on double wall angle cut folded edge tips featuring a sporty black chrome finish. The direct-fit design allows for an easy, do-it-yourself installation process. Exhaust system 19643 is engineered to make your Ford Mustang’s engine produce moderate interior and aggressive exterior sound levels, befitting its competition-oriented design. 19643 is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited finish warranty and limited construction warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

The MagnaFlow 2024 Ford Mustang EcoBoost Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This Ford Mustang cat-back exhaust kit is designed to enhance your 2.3L 2024 Ford Mustang EcoBoost with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. diameter piping that passes 2 all-new dyno-proven performance chambered mufflers ending in a quad split rear exit with 4in. welded-on double wall angle cut folded edge tips featuring a sporty black chrome finish. The direct-fit design allows for an easy, do-it-yourself installation process. Exhaust system 19640 is engineered to make your Ford Mustang’s engine produce moderate interior and aggressive exterior sound levels, befitting its competition-oriented design. 19640 is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s 1-year limited finish warranty and limited construction warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Aggressive exterior sound
• Increased horsepower and torque
• Crafted from 409 stainless steel with all mandrel-bent tubing

The MagnaFlow 2024 Ford Mustang GT Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This Ford Mustang cat-back exhaust kit is designed to enhance your 5.0L 2024 Ford Mustang GT with dyno-proven performance made possible thanks to a resonator-delete H-pipe, fast-flowing mandrel bent 3in. diameter piping that passes 2 all-new dyno-proven performance chambered mufflers ending in a dual split rear exit with 4.5in. welded-on double wall angle cut folded edge tips featuring a sporty black chrome finish. The direct-fit design allows for an easy, do-it-yourself installation process. Exhaust system 19645 is engineered to make your Ford Mustang’s engine produce moderate interior and aggressive exterior sound levels, befitting its competition-oriented design. 19645 is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited finish warranty and limited construction warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

EXHAUST SYSTEM KIT

The MagnaFlow 2024 Ford Mustang EcoBoost Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This Ford Mustang cat-back exhaust kit is designed to enhance your 2.3L 2024 Ford Mustang EcoBoost with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. diameter piping that passes 2 straight-through resonator chambers ending in a dual split rear exit with 4.5in. welded-on double wall angle cut folded edge tips featuring a sporty black chrome finish. The direct-fit design allows for an easy, do-it-yourself installation process. Exhaust system 19639 is engineered to make your Ford Mustang’s engine produce moderate interior and aggressive exterior sound levels, befitting its competition-oriented design. 19639 is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s 1-year limited finish warranty and limited construction warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Aggressive exterior sound
• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque

EXHAUST SYSTEM KIT

EXHAUST SYSTEM KIT

Gemini XV 3" 304 Stainless Steel Cat-Back Exhaust System

Constructed from 3 IN Mandrel-Bent 304 Stainless Steel Tubing.

MACH Force-Xp 304 Stainless Steel Cat-Back Exhaust System with Polished Tip

The MagnaFlow Ford F-150 NEO Series Cat-Back Performance Exhaust System 19584 transforms your 2021-2025 F-150 with the 3.5L engine into a dyno-proven powerhouse that produces a modern take on our signature exhaust sound. This Ford F-150 exhaust system features 3″ diameter mandrel bent main piping that passes through a single 18″ straight-through oval muffler before ending in a dual split rear exit with 5″ double-wall angle-cut rolled-edge black-coated tips. Exhaust kit 19584 is engineered to be easy-to-install and replace all the OEM exhaust components from near the catalytic converter on back. Each of these performance exhaust systems is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited warranty.

Product Features:

• Increased Horsepower and Torque
• No-Drone-Technology (NDT) allows for a quiet cabin
• 100% Stainless Steel

EXHAUST SYSTEM KIT

EXHAUST SYSTEM KIT

Product Features:

• Dual 4-1/2 IN Diameter Black 304 Stainless Steel Clamp-On Exhaust Tips
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• All Necessary Hardware is Included for a Hassle-Free Installation

Constructed from 3 IN Mandrel-Bent 304 Stainless Steel Tubing.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19562 is compatible with all 2021-2025 engine variants of the Ford F-150. Enjoy the newly aggressive sound of your truck’s motor, enhanced with MagnaFlow’s deep signature exhaust tone and dyno proven performance improvements, all while maintaining only moderate levels of interior noise. MagnaFlow 19562 features durable 100 percent stainless steel construction, a single straight-through muffler, 3″ mandrel bent tubing and dual-split rear exit 4″ tips with black powder-coated finish. Cutting-edge CNC precision robotic manufacturing is used to ensure that the exhaust kit’s direct-fit layout bolts on as intended for easy installation.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

EXHAUST SYSTEM KIT

EXHAUST SYSTEM KIT

EXHAUST SYSTEM KIT

EXHAUST SYSTEM KIT

EXHAUST SYSTEM KIT

Force II Kit

This cat-back exhaust system is constructed of 3 IN – 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a mild sound. Finishing off this exhaust system are dual 4 IN diameter carbon fiber 304 stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo for a unique style. This system produces a mild sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

Product Features:

• Constructed from 3 IN – 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing.
• Dual 4 IN Diameter Carbon Fiber 304 Stainless Steel Clamp-On Exhaust Tips
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This cat-back exhaust system is constructed of 3 IN – 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a mild sound. Finishing off this exhaust system are dual 4 IN diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. This system produces a mild sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

Product Features:

• Constructed from 3 IN – 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing.
• Dual 4 IN Diameter Black 304 Stainless Steel Clamp-On Exhaust Tips
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

The MagnaFlow Ford Bronco Overland Series Cat-Back Performance Exhaust system No. 19556 is the perfect solution to further improve the off-road utility of your already-capable 2021-2025 Ford Bronco equipped with the 2.3L turbo I-4. This cat-back, direct-fit exhaust kit is designed to install easily and fit perfectly thanks to the hard work of the engineers at MagnaFlow’s Tech Center, who made detailed 3D scans of the entire vehicle in order to ensure perfect fitment. The advantage of such precise tolerances is that the entire performance exhaust system is mounted closer to the undercarriage of the vehicle than the stock system, resulting in significantly improved ground clearance. No. 19556 also features 3″ main piping that leads to a straight-through muffler before terminating in a single 2.5″ high-clearance side exit, which further improves the rear departure angle versus the standard tailpipe. The result of this upgrade is improved rock crawling capability and the ability to get out of tricky situations on the trail more easily. This Ford Bronco exhaust system utilizes a tunable NDT (No Drone Technology) quarter-wave resonator to eliminate unwanted noises at cruising speeds en route to your destination, with the added benefit of improving situational awareness when you’re out exploring or camping in the middle of nowhere. Exhaust kit No. 19556 is engineered to produce MagnaFlow’s deep signature exhaust tone at mild interior and moderate exterior sound levels, ideal for enjoying the character of your engine without scaring Mother Nature away. This performance exhaust system is made of durable stainless steel backed by MagnaFlow’s limited warranty.

Product Features:

• No-Drone-Technology (NDT) allows for a quiet cabin
• Dyno proven performance
• High clearance exit

EXHAUST SYSTEM KIT

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:

• Designed to allow high flow rates and a consistent flow of oil to your engine
• Pleated synthetic-blend filtration media removes most harmful contaminants
• Fast and easy Wrench-Off removal using the welded one-inch hex nut
• High capacity to withstand the service intervals recommended by vehicle manufacturers
• Heavy-duty canister for outstanding durability
• Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
• Designed to operate with all synthetic, conventional, and blended motor oils
• 1-Year Limited Warranty

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:

• ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
• RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
• 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
• CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
• REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
• ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
• EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
• REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:

• ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
• RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
• 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
• CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
• REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
• ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
• EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
• REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)

The BDX hand-held performance tuner gives drivers the edgepower they need, whether tackling tough terrain, pulling a heavy payload, or maximizing fuel economy on the highway. Its sleek design, full-color display, and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Cloud-based tune delivery over built-in WiFi means that the BDX will always be running the latest tuning – enabling drivers to stay one step ahead of the packÿ.

Product Features:

• Monitor and display vehicle data using the on-screen virtual gauges.
• Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
• Reads and clears DTC (Diagnostic Trouble Codes) with ease
• Product might not be available in all states due to local laws.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

• DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
• IMPROVED ENGINE SOUND: Hear the power under the hood
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
• HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
• Will not void vehicle warranty(limited)

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Limited Warranty.
• Will not void vehicle warranty.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 15.07 HP and up to 19.66 ft.lbs. Torque
• HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed
• DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system
• BETTER ACCELERATION: K&N’s cold air intake kit improves acceleration by improving throttle response and overall horsepower and torque
• FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles
• DURABLE ROTO-MOLDED INTAKE TUBE & CUSTOM HEAT SHIELD: A high-density polyethylene (HDPE) rotationally-molded intake tube helps increase the volume of airflow to your engine, while the heat shield helps protect intake air from the high temperature of you
• PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Limited Warranty protects for the life of your vehicle

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

Dual Large 5-Layer Performance Air Filters: This sealed intake system utilizes pre-oiled, large 7″ tall radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Top Mounted Heat Shield Design: aFe developed this sturdy 18 gauge steel wrinkle-black powder-coated heat shield to snap onto the top of the lower half of the factory airbox to provide a hassle-free installation utilizing factory mounting locations. Large Dual 3″ Intake Tubes: Dual Mandrel-bent Wrinkle-black Powder-coated aluminum intake tubes are designed with an H-pipe to balance intake tubes. Hassle-Free Installation: All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Product Features:

• Balanced Intake Tube Pressures
• Maximizes Air Flow and Velocity
• Powder coated One Piece Steel Housing
• Dual Pro 5R Pre-Oil Air Filters

The K&N DRYFLOW Air Intake System replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The DRYFLOW Air Intake System features an oil-free synthetic filter media providing increased airflow and exceptional engine protection without requiring oil. This allows cooler, denser air to be directed through a custom intake tube into the engine’s throttle body for a guaranteed power gain. The system can typically be installed in less than 60 minutes.

Product Features:

• Guaranteed to increase horsepower and torque.
• Designed to improve throttle response and engine sound
• Replaces entire factory air intake system
• Filter only requires cleaning every 50,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• K&N No-Hassle Limited Warranty
• Will not void vehicle warranty

K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your F150 or Raptor truck and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable Powerflow Cotton Air Filter for ultimate airflow. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine.
• DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
• IMPROVED ENGINE SOUND – HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
• BETTER TOWING: K&N Air intake kit improves acceleration and uphill performance when towing by improving throttle response, overall horsepower and torque. Excellent for daily and highway driving.
• PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle.
• HIGH-FLOW REUSABLE AIR FILTER: 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway drivin
• EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools.
• MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.

The K&N DRYFLOW Air Intake System replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The DRYFLOW Air Intake System features an oil-free synthetic filter media providing increased airflow and exceptional engine protection without requiring oil. This allows cooler, denser air to be directed through a custom intake tube into the engine’s throttle body for a guaranteed power gain. The system can typically be installed in less than 60 minutes.

Product Features:

• Guaranteed to increase horsepower and torque
• Designed to improve throttle response and engine sound
• Replaces entire factory air intake system
• Filter only requires cleaning every 50,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• K&N No-Hassle Limited Warranty
• Will not void vehicle warranty

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER & TORQUE – Cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 19.08 HP & up to 18.35 ft.lbs. Torque
• HEAR THE GROWL – K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed
• DYNO TESTING YOU CAN TRUST – K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are included with each intake system
• BETTER ACCELERATION – K&N’s cold air intake kit improves acceleration by improving throttle response and overall horsepower and torque
• FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER – Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles
• DURABLE ROTO-MOLDED INTAKE TUBE and CUSTOM HEAT SHIELD – A high-density polyethylene (HDPE) rotationally-molded intake tube helps increase the volume of airflow to your engine, while the heat shield helps protect intake air from the high temperature of yo
• PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND – K&N air intake will not void manufacturer vehicle warranty and No-Hassle Limited Warranty protects for the life of your vehicle

SCORCHER GT Power Module

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9″ tall 360-degree radial flow air filter features a 5-3/4″ flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals, while reinforced metal provides maximum strength to prevent filter collapse. Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. Once the system is installed, the air filter can be easily removed from the housing for maintenance by only uninstalling the intake tube. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates factory air scoop inlets, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel T-bolt clamps and a silicone coupling are used for strength and durability. Momentum HD intakes are designed with fewer parts for a fast and easy installation.

This K&N NextGen cold air intake system is engineered for your FORD F150/RAPTOR V6-2.7/3.5L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 24.6 percent (driver side) and 33.25 percent (passenger side) to your engine and provides an increase of 27.20 horsepower and 40.29 torque with no tune required. This intake system is paired with a washable, reusable High-Flow lifetime Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

• Dyno-Proven Performance – Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine’s stock tune. Experience the exciting roar of your engine during acceleration, without any drone at cruising speeds.
• NextGen Airbox – The hybrid airbox features a semi-enclosed airbox that helps lower air temperatures, an enlarged fresh air inlet for improved airflow, and better protection against contaminants.
• Oversized Air Filter – An oversized air filter features an increased surface area and a radius-entry design, both engineered to increase airflow and enhance performance.
• Large-Diameter Tube – The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting airspeed and delivering more air to your engine for added performance.
• Precision Engineering – Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.
• Simplified Installation – The simplified design reduces mounting hardware, while Quick-Lock technology allows the filter to snap into place. A sealing bead secures the system with just one hose clamp.
• 50 plus Years of Trusted Protection – Since 1969, K&N filters have delivered superior filtration, extended cleaning intervals, and proven performance, trusted by racers and enthusiasts alike.
• Warranty – K&N NextGen intakes come with a No-Hassle Limited Warranty, preserving your factory warranty. Designed and engineered in the USA since 1969, K&N provides dedicated, USA-based customer service.

This K&N NextGen cold air intake system is engineered for Ford F150 V8 5.0L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 46.24% to your engine and provides an increase of 15.22 horsepower and 20.37 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

• Dyno-Proven Performance: Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine’s stock tune. Experience the exciting roar of your engine during acceleration, without any drone at cruising speeds.
• NextGen Airbox: The hybrid airbox features a semi-enclosed airbox that helps lower air temperatures, an enlarged fresh air inlet for improved airflow, and better protection against contaminants.
• Oversized Air Filter: An oversized air filter features an increased surface area and a radius-entry design, both engineered to increase airflow and enhance performance.
• Large-Diameter Tube: The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting airspeed and delivering more air to your engine for added performance.
• Precision Engineering: Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.
• Simplified Installation: The simplified design reduces mounting hardware, while Quick-Lock technology allows the filter to snap into place. A sealing bead secures the system with just one hose clamp.
• 50+ Years of Trusted Protection: Since 1969, K&N filters have delivered superior filtration, extended cleaning intervals, and proven performance, trusted by racers and enthusiasts alike.
• Warranty: K&N NextGen intakes come with a No-Hassle Limited Warranty, preserving your factory warranty. Designed and engineered in the USA since 1969, K&N provides dedicated, USA-based customer service.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)