2025 Acura MDX Cooling and Climate Controls
Find Your Specific 2025 Acura MDX Cooling and Climate Controls
Below you will find various in-demand Acura Cooling and Climate Controls, components and accessories for your 2025 MDX. Advance Auto Parts has popular MDX parts like Engine Cooling Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other MDX model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2022,
2023 and more. Select a category of 2025 Acura MDX Cooling and Climate Controls below and start saving instantly.
Popular 2025 Acura MDX Cooling and Climate Controls Categories
Essential Cooling and Climate Controls for 2025 Acura MDXes
Carquest Premium – Coolant Temperature Sensor 1TS1029 (Part No.WTC1203)
from
$41.99
Product Features:
See More
- Designed to meet or exceed OE specifications for fit, form and function
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
- O-rings, seals or thread sealant are included if required
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
NTK – Engine Coolant Temperature Sensor (Part No.EF0110)
from
$63.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to ensure proper air/fuel ratio along with proper operation of the cooling fans and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include, check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clips included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Carquest Premium – Coolant Temp Switch (Part No.ACA1517)
from
$42.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The Coolant Temperature Switch monitors the temperature of the engine’s coolant, activating fans at factory designated temperature set-points ensuring proper engine temperature levels and peak engine performance are maintained.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your Coolant Temperature Switch.
- All units are tested using advanced end-of-line equipment that exposes the switch to actuation temperatures, confirms proper calibration and checks for leaks to ensure each part meets manufacturing specifications before packaging.
NTK – Engine Coolant Temperature Sensor (Part No.EF0069)
from
$39.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to ensure proper air/fuel ratio along with proper operation of the cooling fans and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include, check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clips included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Delphi – Engine Coolant Temperature Sensor (Part No.TS10288)
from
$47.99
Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.
Product Features:
See More
Product Features:
- Delphi temperature sensors deliver accurate readings and optimal performance
- Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
- Each sensor is electrically insulated to eliminate interference from other components in the vehicle
- Delphi temperature sensors are impervious to electrical noise and interference
Carquest – Coolant Temperature Sensor (Part No.WT5068)
from
$35.49
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Delphi – Engine Coolant Temperature Sensor (Part No.TS10180)
from
$56.99
Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.
Product Features:
See More
Product Features:
- Delphi temperature sensors deliver accurate readings and optimal performance
- Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
- Each sensor is electrically insulated to eliminate interference from other components in the vehicle
- Delphi temperature sensors are impervious to electrical noise and interference
Felpro – THERMOSTAT GASKET (Part No.35741)
from
$4.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Radiator Cap: 16 PSI (Part No.10242)
from
$16.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic/Rubber, 1 Pack (Part No.54370)
from
$28.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
- Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
- Seamless fit – reverse-engineered from the original equipment to fit perfectly
- Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
Dorman – Help – Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack (Part No.54228)
from
$17.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
- Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
- Seamless fit – reverse-engineered from the original equipment to fit perfectly
- Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
Dorman – Thermostat Assembly: Includes Gasket, Housing, and Thermostat, 180 Degrees (Part No.902-5836)
from
$49.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Motorad – Integrated Thermostat Housing: With Seal, 172 Degrees (Part No.951-172)
from
$42.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Motorad – Integrated Thermostat Housing: With Seal, 180 Degrees (Part No.951-180)
from
$39.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Dorman – Thermostat Assembly: Includes Gasket, Housing, and Thermostat, 172 Degrees (Part No.902-5834)
from
$48.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Motorad – Integrated Thermostat Housing: With Seal, 172 Degrees (Part No.751-172)
from
$40.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Upgrade your 2025 Acura MDX with Top-Quality Cooling and Climate Controls
When it comes to maintaining or upgrading your 2025 Acura MDX, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Acura or enhancing its overall performance, Cooling and Climate Controls are key to keeping your MDX functioning at its best. At Advance Auto Parts, we offer a wide selection of 4 Cooling and Climate Controls for the 2025 Acura MDX, designed to meet your needs without breaking the bank.
Affordable Prices and Wide Selection
Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2025 Acura MDX at great prices.
Our Cooling and Climate Controls inventory for this model
ranges from just $4.99 to $41.99, with
an average price of $25.99.
Our 4 Cooling and Climate Controls in stock come from 3 trusted brands, so you’re sure to find the right part for your 2025 Acura MDX without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2025 Acura MDX, we stock popular OEM and aftermarket Cooling and Climate Controls from top names
like FELPRO Carquest Premium, and more.
FELPRO Cooling and Climate Controls
start at just $4.99 and boast an impressive 4.6 stars average rating from customers.
With 276 customer reviews and counting, our 2025 Acura MDX Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Air Intakes, Lighting Products
and more to make sure your 2025 Acura MDX is always ready to roll. We’re committed to providing you with everything you need to keep your MDX in top shape, all in one place.
Start shopping confidently below for your 2025 Acura MDX!
Best-Selling Engine Cooling Parts for 2025 Acura MDXes
Enhance the driving experience in your Acura with 4 quality Engine Cooling Part components, starting at $4.99.
Felpro – THERMOSTAT GASKET (Part No.35741)
from
$4.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Radiator Cap: 16 PSI (Part No.10242)
from
$16.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Coolant Temperature Sensor 1TS1029 (Part No.WTC1203)
from
$41.99
Product Features:
See More
- Designed to meet or exceed OE specifications for fit, form and function
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
- O-rings, seals or thread sealant are included if required
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Motorad – Integrated Thermostat Housing: With Seal, 180 Degrees (Part No.951-180)
from
$39.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Top-Rated Cooling and Climate Controls Brands For Your 2025 Acura MDX
Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2025 Acura MDXes. Below you’ll find some of our best rated Cooling and Climate Controls from FELPRO and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2025 MDX start at just $4.99 and are rated as high as 4.6 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 2025 Acura MDX Cooling and Climate Controls
When it comes to maintaining or upgrading your 2025 Acura MDX, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Cooling and Climate Controls, specifically designed for the 2025 Acura MDX. With over 1 FELPRO brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.99. Plus, with over 1 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Carquest Premium 2025 Acura MDX Cooling and Climate Controls
Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2025 Acura MDX owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2025 MDX, Advance Auto Parts carries a full inventory of 1 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Acura in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range up to $16.99, plus, with more than 137 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.
FAQs for 2025 Acura MDX Cooling and Climate Controls
Which Cooling and Climate Controls are best-sellers for 2025 Acura MDXes?
Out of 4 Cooling and Climate Controls that fit 2025 Acura MDXes, the following parts are the top sellers:
- Coolant Temperature Sensor 1TS1029 (12422902) – $41.99
- Integrated Thermostat Housing: With Seal, 180 Degrees (11685648) – $39.99
What’s the price range for 2025 Acura MDX Cooling and Climate Controls?
Cooling and Climate Control prices for the 2025 Acura MDX start at $4.99 and go up to $41.99 for the most premium parts.
What’s the average price of a Cooling and Climate Control for a 2025 Acura MDX?
The average price for Cooling and Climate Controls for the 2025 Acura MDX is $25.99. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Cooling and Climate Controls for other Acura MDX model years?
What are the cheapest Cooling and Climate Controls for my 2025 Acura MDX?
The cheapest 2025 Acura MDX Cooling and Climate Controls we carry in stock are:
- THERMOSTAT GASKET (15780991) – $4.99
- Radiator Cap: 16 PSI (17110029) – $16.99
- Integrated Thermostat Housing: With Seal, 180 Degrees (11685648) – $39.99
- Coolant Temperature Sensor 1TS1029 (12422902) – $41.99
What are the top-rated Cooling and Climate Controls that fit the 2025 Acura MDX?
Out of 276 reviews by customers, our 2025 Acura MDX Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2025 Acura MDX and their top-rated products:
- Engine Cooling Parts
- THERMOSTAT GASKET (15780991) – $4.99
- Radiator Cap: 16 PSI (17110029) – $16.99
What types of Cooling and Climate Controls do you sell for my 2025 Acura MDX?
As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2025 Acura MDX:
Can I get help with 2025 Acura MDX Cooling and Climate Control orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Acura Cooling and Climate Controls and more.
What is your return policy for Acura MDX Cooling and Climate Controls?
Advance Auto Parts keeps returns simple. For new Acura MDX Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
