2023 Acura MDX Cooling and Climate Controls
More 2023 Acura MDX Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 2023 Acura MDX, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 2023 Acura MDX Cooling and Climate Controls
Motorad – Integrated Thermostat Housing: With Seal, 172 Degrees (Part No.951-172)
from
$37.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Motorad – Integrated Thermostat Housing: With Seal, 172 Degrees (Part No.751-172)
from
$37.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Motorad – Integrated Thermostat Housing: With Seal, 180 Degrees (Part No.951-180)
from
$35.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
OPT – Engine Coolant Thermostat Gasket (Part No.G403158060OPT)
from
$3.77
The OPT Engine Coolant Thermostat Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Ishino – Stone Engine Coolant Thermostat Housing Gasket (Part No.G4020184565ISH)
from
$1.70
The Ishino Stone Engine Coolant Thermostat Housing Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Felpro – Engine Coolant Outlet Gasket (Part No.36026)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
Felpro – Engine Water Pump Gasket (Part No.35677)
from
$3.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
NPW – Water Pump (Part No.G3000167512NPW)
from
$74.78
The NPW water pump is a 100% new replacement and contains no remanufactured components, assuring original equipment performance, quality and fit.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- Advanced impeller design.
- Quality cast housing.
- Precision bearings.
- Resistant to corrosion.
- Unitized bearing assembly.
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2304)
from
$79.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- Built to meet or exceed OE fit, form and function
- All components necessary for installation are supplied with pump
- 100% tested for reliable performance
- Follow all enclosed instructions to maximize pump life and validate warranty
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2238)
from
$71.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- Built to meet or exceed OE fit, form and function
- All components necessary for installation are supplied with pump
- 100% tested for reliable performance
- Follow all enclosed instructions to maximize pump life and validate warranty
Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.57-1611)
from
$56.99
Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.
Product Features:
See More
Product Features:
- 100% Factory tested for leakage and dimensional precision
- Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
- Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
- Assembled with new, high-quality unitized shaft seals to prevent premature leakage
- Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
NOK – Water Pipe O-Ring (Part No.G202665192NOK)
from
$2.74
Water Pipe O-Ring
Sankei Switches – Sankei Switches Radiator Cap (Part No.G101045813SAK)
from
$10.06
The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.
Product Features:
See More
Product Features:
- Meets Original Equipment specifications.
- Made from premium materials.
- Designed to function on open cooling systems and overflow reservoir type systems.
Carquest Premium – Radiator Cap: 16 PSI (Part No.10242)
from
$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Santech – HVAC Pressure Transd (Part No.R21431998373SII)
from
$60.55
HVAC Pressure Transd
Carquest Premium – AC Pressure Sensor (Part No.ACA1744)
from
$31.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
KAI – A/C Desiccant Element (Part No.ARD010152)
from
$9.99
New Standard Replacement A/C Receiver Drier/Desiccant Element
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – A/C Desiccant Bag Kit (Part No.T83029)
from
$38.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
KAI – A/C Desiccant Element (Part No.ACM010005)
from
$16.99
New Standard Replacement A/C Receiver Drier And Desiccant Element
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – A/C Desiccant Element (Part No.FTT011013)
from
$9.99
New Standard Replacement A/C Receiver Drier/Desiccant Element, Cap Only, Plastic
Product Features:
See More
Product Features:
- Cap Only, Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Popular 2023 Acura MDX Cooling and Climate Controls Categories
2023 Acura MDX Cooling and Climate Controls
You count on your 2023 Acura MDX to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 12 Cooling and Climate Controls ranging in price from $2.74 to $142.67, you’re sure to find everything you need for your 2023 Acura MDX.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 8 different brands like Carquest Premium, Felpro, and Aisin. 2023 Acura MDX Cooling and Climate Controls start as low as $2.74!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 304 extensive product reviews on 2023 Acura MDX Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Sankei Switches Radiator Cap with 5.0 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2023 Acura MDX below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 2023 Acura MDX
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2023 Acura MDX running right for years to come. In our inventory you’ll find brands like Carquest Premium, Felpro, Aisin, and even more.
Popular Felpro Cooling and Climate Controls
You’ll find popular Felpro brand products across Engine Cooling Parts. All are waiting to get your 2023 Acura MDX back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Carquest Premium Cooling and Climate Controls
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Cooling and Climate Controls for your 2023 Acura MDX, and some of our most reviewed Carquest Premium parts include:
FAQs for 2023 Acura MDX Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 2023 Acura MDX?
Out of 12 Cooling and Climate Controls for the 2023 Acura MDX, the most popular in our inventory are:
What are the top-rated 2023 Acura MDX Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 2023 Acura MDX based on customer reviews/ratings are:
