2024 Toyota 4Runner Body Parts

New Standard Replacement Passenger Side Front Bumper Cover Lower Molding, Chrome, Limited

Product Features:

• Chrome, Limited, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Stainless or Black

Product Features:

• Lightweight Aluminum Powder Coated Frame
• Full Length Protective Accent Trim
• Slip Resistant Raised Rubber Grommets On The Step Area
• NRT(TM) Powder Coated Steel Braces
• No Drilling Required

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

New Standard Replacement Passenger Side Front Bumper Cover Bracket

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The Westin(TM) Ultimate Bull Bar is a front-end light bar made of 3in. diameter tubing for larger model trucks and SUVs and made of 2.5in. diameter tube for smaller trucks and SUVs. Product application is vehicle specific and comes complete with mounting

Product Features:

• 3 in. Diameter Bar
• Mount Kit Included
• License Plate Re-Locator May Be Required
• May Partially Cover License Plate
• Black Powder Coated Mild Steel
• Skid Plate Features Die-Cut Westin Logo
• Easy No Drill Installation
• 5 Year Warranty

Westin(TM) E-Series Bull Bars are a front-end light bar designed for trucks and larger model SUVs. It is made of 3 diameter polished stainless steel tube. It mounts utilizing existing vehicle mounting points and installation does not require any drilling to the vehicle frame. Comes complete with mounting kit the Westin(TM) E-Series Bull Bar provides a mounting point for 2 auxiliary lights up to 6 in diameter. It features a die-cut Westin(TM) block logo design on the stainless steel skid plate unique to the Westin(TM) E-Series Bull Bar.

Product Features:

• Mount Kit Included
• Made Of 3in. Diameter Stainless Steel Tubing
• Stainless Bull Bar Comes w/Brushed Skid Plate
• Black Bull Bar Comes w/Textured Black Skid Plate
• 20 in. Led Light Mounting Brackets Sold Separately
• Fully Welded Cross Tube
• 2 Light Mounting Points On The Top Of Center Bar
• License Plate Re-Locator Sold Separately

New CAPA Certified Premium Replacement Front Bumper Cover, Paint To Match

Product Features:

• Paint To Match, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Front Bumper Cover, For Trail Edition/Trd Pro, Paint To Match

Product Features:

• For Trail Edition/Trd Pro, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Lower Grille. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille Molding Upper, Chrome, Bumper Mounted, Under Emblem. It is Designed to Replace Your Existing Grille Molding. Check to Be Sure it Fits Your Vehicle.

Product Features:

• Chrome, Bumper Mounted, Under Emblem, Made Of ABS Thermoplastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Front Bumper Cover Bracket

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Front Bumper Cover Bracket

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New, Standard Replacement Passenger Side Front Bumper Support

Product Features:

• Meets All Federal Motor Safety Standards
• No Drilling Or Modifications Needed For Installation
• Same Form Fit As OE

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal
• Non-Stick Back-Up Ring
• Hardened Nitride Plated Steel Shaft
• Engineered In USA To OE Quality Standards For Performance And Durability
• IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
• Easy To Install In Just Minutes. No Special Tools Required.
• Exact Fit Original Equipment Design Guarantees Correct Fit And Function
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

New Standard Replacement Front Bumper Lower Air Shield, 2WD Limited [With Chrome] Models

Product Features:

• 2WD Limited [With Chrome] Models, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Front Bumper Lower Air Shield Cover, Except Limited

Product Features:

• Excludes Limited, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Front Lower Bumper Air Shield, For 4-Wheel Drive Limited Models, With Chrome Trim

Product Features:

• For 4-Wheel Drive Limited Models, With Chrome Trim, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Front Bumper Cover Center Retainer

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Front Bumper Cover Retainer Bracket, For Limited Model

Product Features:

• For Limited Model, Made Of ABS Thermoplastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Front Bumper Cover Retainer, For Limited Model

Product Features:

• For Limited Model, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Front Bumper Cover Retainer Bracket, For Limited Model

Product Features:

• For Limited Model, Made Of ABS Thermoplastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

• Vehicle Specific Mounting Kit Required; Sold Separately
• 4 in. Oval Tube
• Injection Molded Polymer Step Pad
• Molded Oval End Caps
• Bolt-On Installation; No Drilling Required
• Limited Lifetime Warranty

The LUND Terrain HX Step(TM) is an aggressive but functional design, these nerf bars provide a rugged off-road look that also makes it easier to get in and out of a truck. The design adds rocker panel protection from the road debris and helps guard against door dings.

Product Features:

• Made From 3 in. 3mm Thick Heavy Duty Steel Tubing
• Hoop Steps Are Securely Welded To Main Tube
• 4 in. Drop For Easier Entry And Exit
• Incl. Non-Slip Skid Plate On Each Step
• Easy No Drill Installation
• Made In The USA

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. A

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required
• 3 Year Warranty

Westins Platinum 4 Oval Nerf Step Bars feature OE styling and offer an alternative look and style to traditional round tube steps. Their larger size provides strength and confidence with a full 4″ wide recessed step area. Platinum 4 Oval Nerf Step Bars ar

Product Features:

• 90 Degree Mandrel Bends
• 4 in. Wide Step Pad
• 4.25 in. Wide At Widest Dimension
• Black Powdercoat E-Coat Mild Steel
• Mount Kit Included
• 3 Year Limited Warranty

ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Toyota 4Runner (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:

• Unique bends to contour to the body of the vehicle
• Custom, non-skid step pads for safe entry and exit
• 3″ diameter, heavy-wall tube design
• High-strength carbon steel construction
• Highly rust-resistant semi-gloss black powder coat and E-coat finish
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step