2024 Ram 1500 Car Parts & Accessories

For the heavy-duty hauler and hardworking trailer blazer, a headache rack is a must-have truck accessory. It does not take much for a two-by-four, steel pipe or other loose cargo to put a good size crack in the rear window of your truck cab, especially when you stick to the off-road trail more than the paved road. The ARIES classic headache rack offers a hardy design and sturdy structure to make sure your truck is ready to work. Made from 1″ x 2″ carbon steel tubing, ARIES classic headache racks provide excellent protection for your truck cab, from both the heat of the sun and potential impact from unsecure cargo in your truck bed. The full louvers help keep your cab cooler throughout the day, and their heavy-duty construction helps block any damage from behind. The ARIES classic headache rack also features a dual-layer E-coat and semi-gloss black powder coat finish to maintain its sleek appearance, preventing damage from rust, scratches and UV rays. Installation is quick and easy with the ARIES headache rack. It is compatible with cross-bed truck tool boxes and includes all necessary hardware for a complete installation. When your pickup truck is more than just a show horse, ARIES has you covered. We understand that it’s about more than goofing off in the mud. When you have a job to finish and a workhorse to drive, an ARIES classic headache rack is a reliable tool in your belt.

Product Features:

• Heavy-duty 1″ x 2″ steel tube construction for a solid frame
• Dual-layer E-coat and black powder coat finish for maximum corrosion resistance
• Fully louvered center section to protect the cab and passengers
• Louvers also help keep the cab cooler by blocking direct sunlight
• Flat steel brackets bolt onto the truck bed walls (drilling may be required)
• Compatible with most crossover truck tool boxes

If you are looking for tailgate operation so smooth you could virtually use a single finger, then Dee Zee Tailgate assist is the choice for you. It allows easy operation, even when your hands are full, and avoid the bone-jarring thud from your truck bed slamming down. Our single dampened gas shock is extensively tested and works in conjunction with factory cables. Truck Tailgate Assist is designed specifically for each make and model, which makes installation a breeze.

Product Features:

• Safely Controls The Drop Rate Of Your Tailgate
• Designed Specifically For Each Make And Model
• Tested To Handle Heavy Daily Use
• Works In Conjunction With Factory Cables
• Easy, No Drill Installation With Simple Hand Tools

New Standard Replacement Tailgate Access Panel

Product Features:

• Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Laser Measured MudFlaps are custom fit and protect your vehicle fenders and exterior from rocks, mud, road grime and other debris picked up by your vehicle wheels. No drilling required and installs in Minutes.

Product Features:

• Contoured Specifically For Each Application And Molded From A Proprietary Thermoplastic Resin
• MudFlap Will Offers Undeniable Vehicle Protection
• Features The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provides Protection For Your Vehicles Most Vulnerable Areas Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Laser Measured For A Perfect Fit Set Literally Mounts In Minutes (In Most Applications) Without The Need For Wheel Or Tire Removal
• Most Importantly -Mounts Without The Need For Drilling Into The Vehicle Fragile Painted Metal Surface

For solid footing, a comfortable step and a bold look for your truck, ARIES 6″ oval side bars are a step up. They are designed to mimic the style popular original equipment side bars and running boards, featuring two professional finish options, large non-skid step pads and tapered end caps. This particular pair of 6″ ovals is made with 304 stainless steel, meaning they are high in nickel content to be truly resistant to rust and corrosion. For a lasting shine and a bright accent on your vehicle, they are given a highly polished, mirror-like finish. They are also available in semi-gloss black powder-coated aluminum. To protect the interior of the tubes, all 6″ oval sides are equipped with hard ABS plastic end caps. The end caps come pre-attached to the tubes and feature a tapered design, lending to the overall OE look of the side bars and providing a professional finishing touch on your truck or SUV. For a sure step every time you climb into your vehicle, ARIES 6″ ovals are equipped with extra-wide step pads. The step pads are made from tough polypropylene and provide a generous 5″ width. The large, flat surface offers comfortable footing and has a textured surface to prevent slipping, even when wet. The polypropylene construction makes the step pads durable and crack-resistant for long-lasting use. ARIES 6″ oval side bars are also made for easy, no-drill installation. The boards themselves feature a track system for versatile application, and they mount using vehicle-specific brackets for a custom fit. The mounting brackets are made from high-strength carbon steel and use pre-existing holes to eliminate drilling during the installation process (NOTE: Mounting brackets for these side bars are sold separately. See the application information to find which brackets and side bars fit your vehicle).

Product Features:

• 6″ wide, OE-style tube with hard ABS plastic end caps
• 304 stainless steel construction to be strong and truly rust-resistant
• Mirror-like polished stainless steel finish for a bright, clean accent
• Extra-wide, non-skid step pads for safe, comfortable entry and exit
• Universal track mounting system for easy, secure installation
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty, powder-coated steel mounting brackets for a solid step

Weathertech mudflap laser measured for a perfect fit set literally mounts in minutes without the need for wheel and tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Quickturn fastening system protects the fender and rocker panel from stone chips, slush, dirt and debris.

Product Features:

• QuickTurn Fastening System Features The Patented QuickTurn Hardened Stainless Steel Fastening System Provides Protection For Your Vehicles Most Vulnerable Areas
• Laser Measured MudFlaps Are Custom Fit And Protect Your Vehicle s Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Your Vehicle s Wheels
• Protects The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Contoured Specifically For Each Application And Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

Weathertech mudflap laser measured for a perfect fit set literally mounts in minutes (in most applications) without the need for wheel and tire removal, and most importantly without the need for drilling into the vehicle fragile painted metal surface. Quickturn fastening system, protects the fender and rocker panel from stone chips, slush, dirt and debris.

Product Features:

• QuickTurn Fastening System Features The Patented QuickTurn Hardened Stainless Steel Fastening System Provides Protection For Your Vehicles Most Vulnerable Areas
• Laser Measured MudFlaps Are Custom Fit And Protect Your Vehicle s Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Your Vehicle s Wheels
• Protects The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Contoured Specifically For Each Application And Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

TONNEAUS

TONNO PRO TONNEAUS

Weathertech TechLiner is the easiest to install, custom-fit solution for protecting and preserving pick-up truck beds ¿ PERIOD  TechLiner armors your investment against scratches, dents and paint damage by seamlessly lining the truck bed and tailgate.  The liner soft touch material helps to prevent cargo from shifting yet provides ease to loading or unloading. Made from a 100 Percent recyclable and odorless thermoplastic elastomer, TechLiner is durable, flexible and UV resistant. Custom-fit for each application, the liner securely fits the exact contours of the truck bed. Will not crack, break or warp in even extreme temperatures. Installation takes only minutes, without the need for drilling or use of chemical applications.

Product Features:

• 100 Percent Recyclable, Odorless Material
• Flexible And Durable
• Chemical And UV Resistant
• Provides Additional Protection Against Paint Damage
• No Messy Sprays Or Drilling Required
• Deal For Users Of Truck Caps And Transporting Equipment Or Other Materials
• Secured To The Truck Bed With The Use Of A Hook And Loop System That Allow For An Effortless Fit And The Ability To Remove The Liner If Necessary
• Fits To The Exact Contours Of Application
• Easiest To Install Pick-Up Bed Protection

Laser Measured MudFlaps are custom fit and protect your vehicle fenders and exterior from rocks, mud, road grime and other debris picked up by your vehicle wheels. No drilling required and installs in Minutes.

Product Features:

• Contoured Specifically For Each Application And Molded From A Proprietary Thermoplastic Resin
• MudFlap Will Offers Undeniable Vehicle Protection
• Features The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provides Protection For Your Vehicles Most Vulnerable Areas Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Laser Measured For A Perfect Fit Set Literally Mounts In Minutes (In Most Applications) Without The Need For Wheel Or Tire Removal
• Most Importantly -Mounts Without The Need For Drilling Into The Vehicle Fragile Painted Metal Surface

The new Lund Hard Fold tonneau cover is our latest addition to our top selling premium tonneau covers. The Hard Fold has been designed exclusively with an aluminum under body frame covered with the highest marine grade cover on top. Maximum security is provided through impact resistant panels that simplifies installation and operation. To open, simply unclamp the locking handles and fold the cover forward. The nylon straps hold the cover in an open position when you need to haul your cargo. This cover comes completely assembled – no drilling required. Installation time is less than 10 minutes and is backed by our limited lifetime warranty.

Product Features:

• 6063 All Aluminum Sub-Panels
• Double-Sided/Tear Resistant
• 24.5 oz. Marine Grade Vinyl Material
• Black Epoxy Coated Sub-Panel And Support Beams
• Comes Completely Assembled
• Scuff And Dent Resistant Hard Fold Design
• Simple Clamping System For Securing Your Cover
• Provides Tension And Security
• Evenly Distributed Weight Rating Of 350 lbs.
• Removes In Less Than 3 Minutes

Hard Fold

Tonno Pro Truck Bed Tonneau Cover

NERF BARS

NERF BARS

Take a step up with a set of LUND’s 5in. Oval Bent Nerf Bars. These oval nerf bars are designed to custom fit your vehicle, complementing the overall look while providing you with safe, sure footing in and out of your vehicle – no matter your shoe type. In fact, each bar has a recessed step area with UV-resistant rubber grip pads providing solid traction and stability. LUND’s 5in. Oval Bent Nerf Bars feature chrome-plated or all black matte finishes and are designed with a tubular shape and curved style, creating a rugged yet contemporary look and feel. Designed and engineered to go the distance. LUND’s 5in. Oval Bent Nerf Bars are constructed with a cutting-edge polymer material set within a lightweight, durable aluminum frame, making these bars tough as metal and virtually corrosion-free. These bars, available in 80in. and 87in. lengths, also offers a broad stepping area designed larger than traditional step bars. Easy bolt-on installation. The nerf bars come pre-assembled and include custom mounting hardware for a direct, no-drill install. The mounting brackets, included with your order, are made to custom fit your specific truck or SUV’s make and model, and once they’re on, will provide your vehicle with added safety and convenience for years to come.

Product Features:

• UV Resistant Polymer Pad
• Recessed Aluminum Frame
• Accents The Line Of Your Vehicle

Take a step up with a set of LUND’s 5in. Oval Bent Nerf Bars. These oval nerf bars are designed to custom fit your vehicle, complementing the overall look while providing you with safe, sure footing in and out of your vehicle – no matter your shoe type. In fact, each bar has a recessed step area with UV-resistant rubber grip pads providing solid traction and stability. LUND’s 5in. Oval Bent Nerf Bars feature chrome-plated or all black matte finishes and are designed with a tubular shape and curved style, creating a rugged yet contemporary look and feel. Designed and engineered to go the distance. LUND’s 5in. Oval Bent Nerf Bars are constructed with a cutting-edge polymer material set within a lightweight, durable aluminum frame, making these bars tough as metal and virtually corrosion-free. These bars, available in 80in. and 87in. lengths, also offers a broad stepping area designed larger than traditional step bars. Easy bolt-on installation. The nerf bars come pre-assembled and include custom mounting hardware for a direct, no-drill install. The mounting brackets, included with your order, are made to custom fit your specific truck or SUV’s make and model, and once they’re on, will provide your vehicle with added safety and convenience for years to come.

Product Features:

• UV Resistant Polymer Pad
• Recessed Aluminum Frame
• Accents The Line Of Your Vehicle

When you start and end your day turning the ignition of your truck, unreliable footing just is not an option. You need a step that can bear weight with ease, provide comfortable footing and look good doing it. ARIES 4″ oval side bars are sleek, strong and custom-fitted to be a highly functional extension of your truck. ARIES 4″ oval side bars are made with strong 4″ elliptical tubing and are available in two different finish options to allow for full customization: polished stainless steel and black powder coat carbon steel. This set of side bars is constructed from 304 stainless steel, meaning high nickel content to be truly stainless. They easily resist rust and corrosion and feature a highly polished finish that is made to last. Something that sets the ARIES 4″ oval side bar apart from all others is its blended end caps and OE-style bends. Rather than capping our side bars with a plastic cap, we offer a blended end cap for a smooth, finished appearance. We also equip the ends with a special 20-degree bend and original equipment styling to perfectly contour to your vehicle. ARIES 4″ oval side bars are fitted with raised step pads to provide a wide stepping surface. The polypropylene construction will not crack over time, and because it has a textured grip, the surface is highly resistant to slips and skids, even when wet. Installation of ARIES 4″ oval side bars is quick and easy with custom-fitted mounting brackets and no drilling necessary. These nerf bars fit select model years of the Ram 1500 (see application info to verify fitment).

Product Features:

• 20-degree bends to contour to the body of the vehicle
• Seamless, welded end caps for a superior, finished look
• Raised, custom, non-skid step pads for safe, comfortable entry and exit
• 304 stainless steel construction to be strong and truly rust-resistant
• Mirror-like polished stainless steel finish for a bright, clean accent
• Elliptical, 4″ wide, heavy-wall tube design
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

BULL BARS

Lund Elite Roll-Up Tonneau Cover: The Ultimate Protection and Convenience

TONNEAUS

NERF BARS

TONNEAUS

TONNEAUS

NERF BARS

NERF BARS

NERF BARS

When the factory transmission fluid filter requires servicing on certain vehicles, you have to replace the entire oil pan. This Dorman OE FIX replacement features a serviceable filter for easier future service, with all necessary hardware. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

• Transmission Pan With Drain Plug, Gasket And Bolts
• Transmission Oil Pan: Direct Fit, Plastic, 8.8 Quart
• Smart replacement – this replacement transmission oil pan features a removable filter to simplify future service
• Complete kit – includes new transmission pan, filter, gasket and bolts for complete conversion

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:

• Precision engineered for a custom fit on your vehicle with modern, curved design
• Easy installation with no-drilling or special hardware required
• Attaches easily with 3M automotive-grade adhesive above the window
• Made from durable, impact-resistant acrylic
• Available in dark smoke and chrome finishes

With a low profile, flush-mount design, the Aeroskin® offers ultimate hood protection against bugs, dirt and road debris for Trucks, SUVs, CUVs, Cars and Vans. The Aeroskin hood shield provides a tough defense against bugs, dirt and road debris for vehicle hoods, fenders and windshields; keeping your hood looking showroom new. Combining modern styling with durable construction and maximum protection, the AVS Aeroskin is an innovative hood protector that looks as good as it functions. Its low-profile flush-mount design sits on the front of your vehicle to provide sleek, aerodynamic protection. Installing your AVS Aeroskin is as simple as can be. It features a simple no-drill installation process that uses 3M automotive-grade tape that will keep it securely mounted to your vehicle. Since it mounts flush to your vehicle as well, it’s perfect for those who want a non-obtrusive look that complements your ride’s appearances. Options include a dark smoke finish, matte black or chrome made of high-quality ABS impact resistant acrylic which makes each AVS Aeroskin durable and built to last. With its forward thinking design, awesome aesthetics, and durable construction, the AVS Aeroskin is perfect to keep you hood and windshield safe and clean.

Product Features:

• Custom-molded with precision engineering to ensure a perfect fit
• Provides sleek, aerodynamic hood protection with low-profile, flush-mount design
• Cool, contoured and classy styling accent
• Easy, no-drill installation — installs using 3M automotive-grade adhesive
• Car wash safe
• Available in dark smoke, chrome, matte black, OEM Paint Code Color-match finishes

AVS hood shields provide a tough defense against bugs, dirt and road debris for vehicle hoods, fenders and windshields; keeping your hood looking showroom new. Whether you drive a truck, SUV, CUV, or passenger car, you can choose from a variety of styles to suit your design preferences and vehicle style. AVS Hoodflector(R) is a medium profile version of hood protection. The Hoodflector helps to prevent damage from road debris. It installs quickly and easily due to the custom applications for trucks, vans, SUVs and CUVs.

Product Features:

• Provides deflection to protect hood, fenders, and windshield
• Medium Profile, wrap-around design for Trucks and SUVs
• Off-the-hood design allows for easy cleaning and waxing
• Durable, impact-resistant acrylic construction
• Available in dark smoke
• Easy, no-drill installation

AVS In-Channel Ventvisor® offers a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle. AVS; the creator of the side window deflector category, lets fresh air in while keeping rain out. The best exterior window protection with a large selection of window deflectors and for cars, trucks, SUV’s and CUV’s.

Product Features:

• Precision engineered for a custom fit on your vehicle with modern, curved low-profile design
• Installs in the window channel for a sleek, aerodynamic appearance
• Made from durable, impact-resistant acrylic
• Available in dark smoke finish

AVS Bugflector® helps prevent damage to the hood, windshield and fenders from road debris and bugs. Bugflector comes in a traditional hood width design that improves the look of your vehicle and protects your investment. Bugflectors install quickly and are molded with a higher profile with custom fit applications for trucks, vans, SUVs and CUVs. Whether you drive a truck, SUV, CUV or passenger car, you can choose from the style that suits your design preferences and vehicle style.

Product Features:

• Provides deflection to protect hood, fenders, and windshield
• High profile, narrow tapered design for Trucks, SUVs, and Vans
• Off-the-hood design allows for easy cleaning and waxing
• Durable, impact-resistant acrylic construction
• Available in dark smoke finish
• Easy, no-drill installation

Keep your front-end looking showroom new with the AVS Bugflector II(R); an innovative high-profile hood shield with a wrap-around design. The AVS Bugflector II(R) is constructed using proprietary, impact resistant ABS material, and it offers maximum coverage area to stop rocks from dinging your hood and to keep insects off your windshield. Car wash safe with an easy non-drill installation, the AVS Bugflector II(R) means minimal downtime without sacrificing protection for your vehicle.

Product Features:

• Provides deflection to protect hood, fenders, and windshield
• High profile, full-wrap design for Trucks, SUVs, and Vans
• Off-the-hood design allows for easy cleaning and waxing
• Durable, impact-resistant acrylic construction
• Available in dark smoke or chrome
• Easy, no-drill installation

Beat the elements and add some attitude to your Truck, Van or SUV. Sidewind Deflectors allow you to keep your windows partially open, to provide ventilation to the interior. Today’s modern aerodynamic body styles with form fitting doors and windows no longer feature “rain gutters” to channel away water. The result is usually water dripping into the interior. Sidewinds act like a “drip-edge” for your vehicle, this allows you to keep your window partially open for ventilation, without the rain getting in. As air flows around the outside edge of the sidewind it creates a small low pressure area underneath it (much like an airplane wing) which creates suction to keep out the wind and draw out the stale air from inside your vehicle.

Product Features:

• Mounts securely into the window channel without taping to any painted surface
• Precision engineered for a perfect fit and an integrated low-profile look
• Available in impact-resistant acrylic with a smoke finish
• Made in USA

With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:

• Precision engineered for a custom fit on your vehicle with modern, curved design
• Easy installation with no-drilling or special hardware required
• Attaches easily with 3M automotive-grade adhesive above the window
• Made from durable, impact-resistant acrylic
• Available in dark smoke and chrome finishes

The WeatherTech Stone and Bug Deflector is designed to safeguard the front of your hood and windshield from rocks, bugs and other airborne debris. The advanced acrylic material is scratch resistant to provide long lasting durability. Stone and Bug Deflector attaches easily to most SUVs, trucks, minivans or cars. Add this protective product to your vehicle for the ultimate in stone and bug protection.

Product Features:

• Sleek And Low Profile
• Aerodynamically Designed To Provide Excellent Protection Against Stone Chips And Bug Stains
• Sleek, Low Profile Provides An OEM Look And Feel
• A Beautiful And Protective Addition To Any Vehicle
• Attaches Easily To Most SUVs, Trucks, Minivans Or Cars Using Either A 3M Brand Automotive Adhesive Tape Or Fasteners That Use Existing Holes In Your Vehicle s Hood
• No Drilling Is Required For Installation

With a low profile, flush-mount design, the Aeroskin® offers ultimate hood protection against bugs, dirt and road debris for Trucks, SUVs, CUVs, Cars and Vans. The Aeroskin hood shield provides a tough defense against bugs, dirt and road debris for vehicle hoods, fenders and windshields; keeping your hood looking showroom new. Combining modern styling with durable construction and maximum protection, the AVS Aeroskin is an innovative hood protector that looks as good as it functions. Its low-profile flush-mount design sits on the front of your vehicle to provide sleek, aerodynamic protection. Installing your AVS Aeroskin is as simple as can be. It features a simple no-drill installation process that uses 3M automotive-grade tape that will keep it securely mounted to your vehicle. Since it mounts flush to your vehicle as well, it’s perfect for those who want a non-obtrusive look that complements your ride’s appearances. Options include a dark smoke finish, matte black or chrome made of high-quality ABS impact resistant acrylic which makes each AVS Aeroskin durable and built to last. With its forward thinking design, awesome aesthetics, and durable construction, the AVS Aeroskin is perfect to keep you hood and windshield safe and clean.

Product Features:

• Custom-molded with precision engineering to ensure a perfect fit
• Provides sleek, aerodynamic hood protection with low-profile, flush-mount design
• Cool, contoured and classy styling accent
• Easy, no-drill installation — installs using 3M automotive-grade adhesive
• Car wash safe
• Available in dark smoke, chrome, matte black, OEM Paint Code Color-match finishes

TechShade is a custom fit windshield and window sun shade that protects your vehicle interior from harmful UV rays. Its clever design helps keep interior temperatures cool in the summer or flip it around and help prevent frost build-up in the winter.

Product Features:

• Reflective Film Chases The Sun Away In Summer
• Keep Your Vehicle Cool In The Summer And Help Prevent Frost Build Up In The Winter
• Reverse Side Absorbs The Heat
• Perfect For Any Season
• When Not In Use, The TechShade Is Easily Removed, Rolled And Secured With A Hook And Loop Strap
• Custom Fit For Each Vehicle

Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.

Product Features:

• Maximum protection to your hood to complement the look of your vehicle
• Precision engineered for a perfect fit to your vehicle
• Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
• Available in smoke, chrome, American flag and camo finishes
• UV and scratch-resistant while being car-wash safe

With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:

• Precision engineered for a custom fit on your vehicle with modern, curved design
• Easy installation with no-drilling or special hardware required
• Attaches easily with 3M(TM) automotive-grade adhesive above the window
• Made from durable, impact-resistant acrylic
• Available in dark smoke and chrome finishes

Laser measured and custom fit, the 3D Floor Mat not only covers your carpeted floors, but also features a raised outer edge to partially cover the front, back and sides of your vehicle s footwell. That s a full 3 Dimensions of protection. Advanced surface designs on the 3D Floor Mat create channels that carry fluids, dirt and other away from your shoes, boots and clothes and into a lower reservoir. The lower reservoir keeps these unsightly messes locked down in one place on the mat and not all over your vehicle s carpet. Created using an advanced rubber like, Thermoplastic Elastomer compound, the 3D Floor Mat is both flexible and durable. 100 Percent recyclable, this material is latex and PVC free. Engineered and created to stand up for the most extreme weather conditions, 3D Floor Mats won t crack, curl or break down.

Product Features:

• Advanced Rubber Like Thermoplastic Elastomer (TPE) Makes These Flexible And Durable
• Secure Into Factory Floor Retention
• Anti-Skid Nibs On The Underside Prevent Shifting
• Advanced Surfacing Carries And Locks Fluids And Debris To A Lower Reservoir
• Features A Raised Outer Edge To Partially Cover The Front, Back And Sides Of Your Vehicles Footwell
• 100 Percent Recyclable Material No Latex, PVC s, Cadmium Or Lead
• Tactile Feel
• Digitally Laser Measured To Perfectly Fit Your Vehicle Model
• Tactile Feel

WeatherTech’s talented designers and engineers have taken our already advanced FloorLiner into the future. Laser measured and custom fit, FloorLiner HP is the next generation of high performance FloorLiner. Designed to protect your carpeted floors as well as the front, back and sides of your vehicle’s footwell. FloorLiner HP is made using advanced rubber-like, Thermoplastic Elastomer (TPE) compound making it both soft and durable. Engineered and created to stand up to the most extreme weather conditions, it won’t crack, curl or break down. This material is also 100 Percent recyclable and is both latex and PVC-free. A specially designed retention system and non-slip nibs keep the FloorLiner HP locked in place, so there’s no sliding. Its beveled edge prevents walls from curving in, for the ultimate in stability. A watertight sill around the retention clasps prevents messes from leaking onto your vehicle’s interior carpet. Optimal side trim lines cut away to display the seal plate on your vehicle.

Product Features:

• Custom Fit For Vehicles Make And Model
• High-Walled Design Helps Contain Messes Of Any Kind
• Anti-Skid Nibs And Underside Texture Keep FloorLiner HP In Place
• Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound Won’t Break Down In Extreme Weather Environments
• Tactile Feel
• Retention Systems And Anti-Skid Texturing On The Underside Of The Mat Ensure Placement Without Any Shifting Or Sliding
• Protects The Bottom, Front, Back And Sides Of Vehicles Footwell
• 100 Percent Recyclable Material: No Latex, PVCs, Cadmium Or Lead

Beat the elements and add some attitude to your Truck, Van or SUV. Sidewind Deflectors allow you to keep your windows partially open, to provide ventilation to the interior. Today’s modern aerodynamic body styles with form fitting doors and windows no longer feature “rain gutters” to channel away water. The result is usually water dripping into the interior. Sidewinds act like a “drip-edge” for your vehicle, this allows you to keep your window partially open for ventilation, without the rain getting in. As air flows around the outside edge of the sidewind it creates a small low pressure area underneath it (much like an airplane wing) which creates suction to keep out the wind and draw out the stale air from inside your vehicle.

Product Features:

• Securely mounts above the window on the door
• Precision engineered for a perfect fit to your vehicle
• Available in impact-resistant acrylic with a smoke finish
• Made in USA
• Car-wash safe

TechShade is a custom fit windshield and window sun shade that protects your vehicle interior from harmful UV rays. Its clever design helps keep interior temperatures cool in the summer or flip it around and help prevent frost build-up in the winter.

Product Features:

• Dual Purpose Design Its Dual Purpose Design Helps Keep Vehicles Cool In The Summer, And In The Winter, Also Helps Warm Up Interiors And Avert Frost Build Up
• Heats In Winter In Those Freezing Winter Months, Flip The TechShade Around To Its Dark Surface And It Will Help Attract The Sunlight
• Cools In Summer In The Summer Months, When Temperatures Can Soar Into The Triple Digits, The Techshade Significantly Reduces The Temperature Of The Vehicle s Dashboard And Steering Wheel
• Effortless Storage, TechShade Can Easily Be Rolled Up And Stored With The Help Of Its Hook And Loop Strap System
• Sturdy Core Features A Foam Core, Which Makes For Easy Handling And A Sturdy Fit In Vehicle Windows And Windshields
• Custom-Fit, Custom Fit For Each Vehicle, And When Properly Installed, Will Remain Snug In Each Window Opening

Laser measured and custom fit, the 3D Floor Mat not only covers your carpeted floors, but also features a raised outer edge to partially cover the front, back and sides of your vehicle s footwell. That s a full 3 Dimensions of protection. Advanced surface designs on the 3D Floor Mat create channels that carry fluids, dirt and other away from your shoes, boots and clothes and into a lower reservoir. The lower reservoir keeps these unsightly messes locked down in one place on the mat and not all over your vehicle s carpet. Created using an advanced rubber like, Thermoplastic Elastomer compound, the 3D Floor Mat is both flexible and durable. 100 Percent recyclable, this material is latex and PVC free. Engineered and created to stand up for the most extreme weather conditions, 3D Floor Mats won t crack, curl or break down.

Product Features:

• Advanced Rubber- Like Thermoplastic Elastomer (TPE) Makes These Flexible And Durable
• Secure Into Factory Floor Retention
• Anti-Skid Nibs On The Underside Prevent Shifting
• Advanced Surfacing Carries And Locks Fluids And Debris To A Lower Reservoir
• Features A Raised Outer Edge To Partially Cover The Front, Back And Sides Of Your Vehicles Footwell
• 100 Percent Recyclable Material, No Latex, PVC’s, Cadmium Or Lead
• Tactile Feel
• Digitally Laser Measured To Perfectly Fit Your Vehicle Model
• Tactile Feel

Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.

Product Features:

• Maximum protection to your hood to complement the look of your vehicle
• Precision engineered for a perfect fit to your vehicle
• Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
• Available in smoke, chrome, American flag and camo finishes
• UV and scratch-resistant while being car-wash safe

Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.

Product Features:

• Maximum protection to your hood to complement the look of your vehicle
• Precision engineered for a perfect fit to your vehicle
• Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
• Available in smoke, chrome, American flag and camo finishes
• UV and scratch-resistant while being car-wash safe

Beat the elements and add some attitude to your Truck, Van or SUV. Sidewind Deflectors allow you to keep your windows partially open, to provide ventilation to the interior. Today’s modern aerodynamic body styles with form fitting doors and windows no longer feature “rain gutters” to channel away water. The result is usually water dripping into the interior. Sidewinds act like a “drip-edge” for your vehicle, this allows you to keep your window partially open for ventilation, without the rain getting in. As air flows around the outside edge of the sidewind it creates a small low pressure area underneath it (much like an airplane wing) which creates suction to keep out the wind and draw out the stale air from inside your vehicle.

Product Features:

• Securely mounts above the window on the door
• Precision engineered for a perfect fit to your vehicle
• Available in impact-resistant acrylic with a smoke finish
• Made in USA
• Car-wash safe

WeatherTech’s talented designers and engineers have taken our already advanced FloorLiner into the future. Laser measured and custom fit, FloorLiner HP is the next generation of high performance FloorLiner. Designed to protect your carpeted floors as well as the front, back and sides of your vehicle’s footwell. FloorLiner HP is made using advanced rubber-like, Thermoplastic Elastomer (TPE) compound making it both soft and durable. Engineered and created to stand up to the most extreme weather conditions, it won’t crack, curl or break down. This material is also 100 Percent recyclable and is both latex and PVC-free. A specially designed retention system and non-slip nibs keep the FloorLiner HP locked in place, so there’s no sliding. Its beveled edge prevents walls from curving in, for the ultimate in stability. A watertight sill around the retention clasps prevents messes from leaking onto your vehicle’s interior carpet. Optimal side trim lines cut away to display the seal plate on your vehicle.

Product Features:

• Custom Fit For Vehicles Make And Model
• High-Walled Design Helps Contain Messes Of Any Kind
• Anti-Skid Nibs And Underside Texture Keep FloorLiner HP In Place
• Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound Won’t Break Down In Extreme Weather Environments
• Tactile Feel
• Retention Systems And Anti-Skid Texturing On The Underside Of The Mat Ensure Placement Without Any Shifting Or Sliding
• Protects The Bottom, Front, Back And Sides Of Vehicles Footwell
• 100 Percent Recyclable Material: No Latex, PVCs, Cadmium Or Lead

WeatherTech’s talented designers and engineers have taken our already advanced FloorLiner into the future. Laser measured and custom fit, FloorLiner HP is the next generation of high performance FloorLiner. Designed to protect your carpeted floors as well as the front, back and sides of your vehicle’s footwell. FloorLiner HP is made using advanced rubber-like, Thermoplastic Elastomer (TPE) compound making it both soft and durable. Engineered and created to stand up to the most extreme weather conditions, it won’t crack, curl or break down. This material is also 100 Percent recyclable and is both latex and PVC-free. A specially designed retention system and non-slip nibs keep the FloorLiner HP locked in place, so there’s no sliding. Its beveled edge prevents walls from curving in, for the ultimate in stability. A watertight sill around the retention clasps prevents messes from leaking onto your vehicle’s interior carpet. Optimal side trim lines cut away to display the seal plate on your vehicle.

Product Features:

• Custom Fit For Vehicles Make And Model
• High-Walled Design Helps Contain Messes Of Any Kind
• Anti-Skid Nibs And Underside Texture Keep FloorLiner HP In Place
• Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound Won’t Break Down In Extreme Weather Environments
• Tactile Feel
• Retention Systems And Anti-Skid Texturing On The Underside Of The Mat Ensure Placement Without Any Shifting Or Sliding
• Protects The Bottom, Front, Back And Sides Of Vehicles Footwell
• 100 Percent Recyclable Material: No Latex, PVCs, Cadmium Or Lead

WeatherTechs talented designers and engineers have taken our already advanced FloorLiner into the future. Laser measured and custom fit, FloorLiner HP is the next generation of high performance FloorLiner. Designed to protect your carpeted floors as well as the front, back and sides of your vehicles footwell. FloorLiner HP is made using advanced rubber like, Thermoplastic Elastomer (TPE) compound making it both soft and durable. Engineered and created to stand up to the most extreme weather conditions, it Would not crack, curl or break down. This material is also 100 Percent recyclable and is both latex and PVC free. A specially designed retention system and non slip nibs keep the FloorLiner HP locked in place, so there is no sliding. Its beveled edge prevents walls from curving in, for the ultimate in stability. A watertight sill around the retention clasps prevents messes from leaking onto your vehicles interior carpet. Optimal side trim lines cut away to display the seal plate on your vehicle.

Product Features:

• Custom Fit For vehicles Make And Model
• High Walled Design Helps Contain Messes Of Any Kind
• Anti Skid Nibs And Underside Texture Keep FloorLiner HP In Place
• Advanced Rubber Like Thermoplastic Elastomer (TPE) Compound Would not Break Down In Extreme Weather Environments
• Tactile Feel
• Retention Systems And Anti Skid Texturing On The Underside Of The Mat Ensure Placement Without Any Shifting Or Sliding
• Protects The Bottom, Front, Back And Sides Of vehicles Footwell
• 100 Percent Recyclable Material, No Latex, PVCs, Cadmium Or Lead

WeatherTechs talented designers and engineers have taken our already advanced FloorLiner into the future. Laser measured and custom fit, FloorLiner HP is the next generation of high performance FloorLiner. Designed to protect your carpeted floors as well as the front, back and sides of your vehicles footwell. FloorLiner HP is made using advanced rubber like, Thermoplastic Elastomer (TPE) compound making it both soft and durable. Engineered and created to stand up to the most extreme weather conditions, it Would not crack, curl or break down. This material is also 100 Percent recyclable and is both latex and PVC free. A specially designed retention system and non slip nibs keep the FloorLiner HP locked in place, so there is no sliding. Its beveled edge prevents walls from curving in, for the ultimate in stability. A watertight sill around the retention clasps prevents messes from leaking onto your vehicles interior carpet. Optimal side trim lines cut away to display the seal plate on your vehicle.

Product Features:

• Custom Fit For vehicles Make And Model
• High Walled Design Helps Contain Messes Of Any Kind
• Anti Skid Nibs And Underside Texture Keep FloorLiner HP In Place
• Advanced Rubber Like Thermoplastic Elastomer (TPE) Compound Would not Break Down In Extreme Weather Environments
• Tactile Feel
• Retention Systems And Anti Skid Texturing On The Underside Of The Mat Ensure Placement Without Any Shifting Or Sliding
• Protects The Bottom, Front, Back And Sides Of vehicles Footwell
• 100 Percent Recyclable Material, No Latex, PVCs, Cadmium Or Lead

WeatherTechs talented designers and engineers have taken our already advanced FloorLiner into the future. Laser measured and custom fit, FloorLiner HP is the next generation of high performance FloorLiner. Designed to protect your carpeted floors as well as the front, back and sides of your vehicles footwell. FloorLiner HP is made using advanced rubber like, Thermoplastic Elastomer (TPE) compound making it both soft and durable. Engineered and created to stand up to the most extreme weather conditions, it Would not crack, curl or break down. This material is also 100 Percent recyclable and is both latex and PVC free. A specially designed retention system and non slip nibs keep the FloorLiner HP locked in place, so there is no sliding. Its beveled edge prevents walls from curving in, for the ultimate in stability. A watertight sill around the retention clasps prevents messes from leaking onto your vehicles interior carpet. Optimal side trim lines cut away to display the seal plate on your vehicle.

Product Features:

• Custom Fit For vehicles Make And Model
• High Walled Design Helps Contain Messes Of Any Kind
• Anti Skid Nibs And Underside Texture Keep FloorLiner HP In Place
• Advanced Rubber Like Thermoplastic Elastomer (TPE) Compound Would not Break Down In Extreme Weather Environments
• Tactile Feel
• Retention Systems And Anti Skid Texturing On The Underside Of The Mat Ensure Placement Without Any Shifting Or Sliding
• Protects The Bottom, Front, Back And Sides Of vehicles Footwell
• 100 Percent Recyclable Material, No Latex, PVCs, Cadmium Or Lead

WeatherTechs talented designers and engineers have taken our already advanced FloorLiner into the future. Laser measured and custom fit, FloorLiner HP is the next generation of high performance FloorLiner. Designed to protect your carpeted floors as well as the front, back and sides of your vehicles footwell. FloorLiner HP is made using advanced rubber like, Thermoplastic Elastomer (TPE) compound making it both soft and durable. Engineered and created to stand up to the most extreme weather conditions, it Would not crack, curl or break down. This material is also 100 Percent recyclable and is both latex and PVC free. A specially designed retention system and non slip nibs keep the FloorLiner HP locked in place, so there is no sliding. Its beveled edge prevents walls from curving in, for the ultimate in stability. A watertight sill around the retention clasps prevents messes from leaking onto your vehicles interior carpet. Optimal side trim lines cut away to display the seal plate on your vehicle.

Product Features:

• Custom Fit For vehicles Make And Model
• High Walled Design Helps Contain Messes Of Any Kind
• Anti Skid Nibs And Underside Texture Keep FloorLiner HP In Place
• Advanced Rubber Like Thermoplastic Elastomer (TPE) Compound Would not Break Down In Extreme Weather Environments
• Tactile Feel
• Retention Systems And Anti Skid Texturing On The Underside Of The Mat Ensure Placement Without Any Shifting Or Sliding
• Protects The Bottom, Front, Back And Sides Of vehicles Footwell
• 100 Percent Recyclable Material, No Latex, PVCs, Cadmium Or Lead

Ahead of the curve as always and continue its high-quality automotive accessories made, AVS proudly debuts its Aeroskin(R) Lightshield(TM) Hood Protector, the only hood protector that offers amber LED marker lights for the edge of your hood! The light bar consists of 5 LED marker lights and is powered by connecting into the vehicle’s parking lights for a seamless integration. This is the hood protector to choose for peace-of-mind protection and a dramatic distinctive look.

Product Features:

• Contoured design provides ultimate hood protection
• Features a light bar that consists of 5 LED marker lights that is powered by connecting into the vehicle’s parking lights for a seamless integration
• Available in textured black finish
• Custom molded and made from tough Dura-Flex® 2000 TPO material that stands up to road hazards
• Attaches with 3M automotive-grade adhesive or mechanical fasteners
• Car-wash safe

Fia NP90 Series Custom Fit Seat Covers feature highly durable, abrasion resistant water proof neoprene laminated with water resistant poly outer shell. Engineered to meet or exceed vehicle manufacturer standards, the advanced design creates a state-of-the-art interior. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers and head rest covers provide the finishing touches for the OEM look.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Foam padded supports in cushion and back rest for added support
• Center armrest/console covers and head rest covers included (most applications)
• Rear split seat 40/60, adjustable headrests, armrest w/cup holder
• Neoprene
• Black w/Gray Center Panel
• 2 Year Limited Liability

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family

Carhartt Super Dux. Born from work. Built for play. The perfect seat cover to protect seats from daily hazards like dirt, mud, spills, people and pets. Available for most pickups and SUVs.

Product Features:

• Vehicle-specific, custom-fit seat covers
• Durable Cordura fabric for strength and longevity
• Waterproof protection and Carhartt styling
• Ideal seat protection for daily use or weekend outings
• Machine washable
• Easy installation and removal

Carhartt Super Dux. Born from work. Built for play. The perfect seat cover to protect seats from daily hazards like dirt, mud, spills, people and pets. Available for most pickups and SUVs.

Product Features:

• Vehicle-specific, custom-fit seat covers
• Durable Cordura fabric for strength and longevity
• Waterproof protection and Carhartt styling
• Ideal seat protection for daily use or weekend outings
• Machine washable
• Easy installation and removal

OE S/C RAM1500 19-20

OE S/C RAM1500 19-20

Fia Oe30 Series Custom Fit Seat Covers feature highly durable, abrasion resistant original equipment standard tweed material. Engineered to meet or exceed vehicle manufacturer standards, the advanced design creates a state-of-the-art interior. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers and head rest covers provide the finishing touches for the OEM look.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Foam padded supports in cushion and back rest for added support
• Center armrest/console covers and head rest covers included (most applications)
• Front split seat 40/20/40, adjustable headrests, side airbags, center armrest w/cup holders, 2 storage compartments (center armrest, center cushion)
• Tweed
• Charcoal
• 2 Year Limited Liability

Fia Leatherlite SL60 Series Custom Fit Seat Covers are engineered with soft touch simulated leather. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers, and head rest covers provide the finishing touches for a tailored exact fit for your vehicle.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Form fit wrap around design – multidirectional stretch trim molds to the contours of the seat
• Center armrest/console covers and head rest covers included (most applications)
• Fitment: Front split seat 40/20/40, non-removable/adjustable headrests, side airbags, center seat belt, 2 storage compartments (center armrest, center cushion), cup holders.
• Material: Leatherette
• Color: Solid Black

SL S/C RAM1500 19-20

SL S/C RAM1500 19-20

Fia Oe30 Series Custom Fit Seat Covers feature highly durable, abrasion resistant original equipment standard tweed material. Engineered to meet or exceed vehicle manufacturer standards, the advanced design creates a state-of-the-art interior. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers and head rest covers provide the finishing touches for the OEM look.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Foam padded supports in cushion and back rest for added support
• Center armrest/console covers and head rest covers included (most applications)
• Front split seat 40/20/40, adjustable headrests, side airbags, center armrest w/cup holders, 1 storage compartment (center armrest), center cushion w/molded plastic organizer
• Tweed
• Charcoal
• 2 Year Limited Liability

Fia Oe30 Series Custom Fit Seat Covers feature highly durable, abrasion resistant original equipment standard tweed material. Engineered to meet or exceed vehicle manufacturer standards, the advanced design creates a state-of-the-art interior. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers and head rest covers provide the finishing touches for the OEM look.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Foam padded supports in cushion and back rest for added support
• Center armrest/console covers and head rest covers included (most applications)
• Rear split seat 40/60, adjustable headrests, armrest w/cup holder
• Tweed
• Charcoal
• 2 Year Limited Liability

Fia Leatherlite SL60 Series Custom Fit Seat Covers are engineered with soft touch simulated leather. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers, and head rest covers provide the finishing touches for a tailored exact fit for your vehicle.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Form fit wrap around design – multidirectional stretch trim molds to the contours of the seat
• Center armrest/console covers and head rest covers included (most applications)
• Rear split seat 40/60, adjustable headrests, armrest w/cup holder
• Leatherette
• Solid Black
• 2 Year Limited Liability

NP S/C RAM1500 19-20

Carhartt SeatSaver custom seat covers from Covercraft are the solution to the problem of keeping the seats in your truck or SUV clean and protected from daily use and weekend adventures. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and classic Carhartt styling, you get seat covers that look great and protect your seats from whatever you throw at them.

Product Features:

• Custom-Patterned Seat Cover: Designed to fit your specific vehicle’s seats, ensuring a tailored appearance
• Easy Installation and Removal: Hassle-free process for quick setup and removal when needed
• Machine Washable: Easy maintenance and cleaning, allowing you to keep them looking fresh
• Carhartt Tough: Made with iconic Duck Weave fabric, triple-stitched seams, and treated with Rain Defender DWR for durability, water resistance, and rugged style
• Heavy-Duty Protection: Shields your factory seats from work, hunting, fishing, pets, and anything else you throw at them; Not only is the fabric super durable, but it is highly water-resistant to bead away any moisture, spills, or drool from your pups

Carhartt SeatSaver custom seat covers from Covercraft are the solution to the problem of keeping the seats in your truck or SUV clean and protected from daily use and weekend adventures. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and classic Carhartt styling, you get seat covers that look great and protect your seats from whatever you throw at them.

Product Features:

• Custom-Patterned Seat Cover: Designed to fit your specific vehicle’s seats, ensuring a tailored appearance
• Easy Installation and Removal: Hassle-free process for quick setup and removal when needed
• Machine Washable: Easy maintenance and cleaning, allowing you to keep them looking fresh
• Carhartt Tough: Made with iconic Duck Weave fabric, triple-stitched seams, and treated with Rain Defender DWR for durability, water resistance, and rugged style
• Heavy-Duty Protection: Shields your factory seats from work, hunting, fishing, pets, and anything else you throw at them; Not only is the fabric super durable, but it is highly water-resistant to bead away any moisture, spills, or drool from your pups

OE S/C RAM1500 19-20

OE S/C RAM1500 19-20

Fia Oe30 Series Custom Fit Seat Covers feature highly durable, abrasion resistant original equipment standard tweed material. Engineered to meet or exceed vehicle manufacturer standards, the advanced design creates a state-of-the-art interior. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers and head rest covers provide the finishing touches for the OEM look.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Foam padded supports in cushion and back rest for added support
• Center armrest/console covers and head rest covers included (most applications)
• Front split seat 40/20/40, adjustable headrests, side airbags, center armrest, 1 storage compartment (center armrest)
• Tweed
• Charcoal
• 2 Year Limited Liability

Fia Leatherlite SL60 Series Custom Fit Seat Covers are engineered with soft touch simulated leather. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers, and head rest covers provide the finishing touches for a tailored exact fit for your vehicle.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Form fit wrap around design – multidirectional stretch trim molds to the contours of the seat
• Center armrest/console covers and head rest covers included (most applications)
• Front split seat 40/20/40, adjustable headrests, side airbags, center armrest w/cup holders, 2 storage compartments (center armrest, center cushion)
• Leatherette
• Solid Black
• 2 Year Limited Liability

Fia Leatherlite SL60 Series Custom Fit Seat Covers are engineered with soft touch simulated leather. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers, and head rest covers provide the finishing touches for a tailored exact fit for your vehicle.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Form fit wrap around design – multidirectional stretch trim molds to the contours of the seat
• Center armrest/console covers and head rest covers included (most applications)
• Front split seat 40/20/40, adjustable headrests, side airbags, center armrest w/cup holders, 2 storage compartments (center armrest, center cushion)
• Leatherette
• Black w/Gray Center Panel
• 2 Year Limited Liability

Fia Oe30 Series Custom Fit Seat Covers feature highly durable, abrasion resistant original equipment standard tweed material. Engineered to meet or exceed vehicle manufacturer standards, the advanced design creates a state-of-the-art interior. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers and head rest covers provide the finishing touches for the OEM look.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Foam padded supports in cushion and back rest for added support
• Center armrest/console covers and head rest covers included (most applications)
• Fitment: Front split seat 40/20/40, non-removable/adjustable headrests, side airbags, center seat belt, 2 storage compartments (center armrest, center cushion), cup holders.
• Material: Tweed
• Color: Charcoal

Fia Leatherlite SL60 Series Custom Fit Seat Covers are engineered with soft touch simulated leather. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers, and head rest covers provide the finishing touches for a tailored exact fit for your vehicle.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Form fit wrap around design – multidirectional stretch trim molds to the contours of the seat
• Center armrest/console covers and head rest covers included (most applications)
• Fitment: Rear split seat 40/60, adjustable headrests, armest w/cup holder. For Crew Cab.
• Material: Leatherette
• Color: Solid Black

Fia Leatherlite SL60 Series Custom Fit Seat Covers are engineered with soft touch simulated leather. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers, and head rest covers provide the finishing touches for a tailored exact fit for your vehicle.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Form fit wrap around design – multidirectional stretch trim molds to the contours of the seat
• Center armrest/console covers and head rest covers included (most applications)
• Front split seat 40/20/40, adjustable headrests, side airbags, center armrest w/cup holders, 1 storage compartment (center armrest), center cushion w/molded plastic organizer
• Leatherette
• Solid Black
• 2 Year Limited Liability

Carhartt SeatSaver custom seat covers from Covercraft are the solution to the problem of keeping the seats in your truck or SUV clean and protected from daily use and weekend adventures. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and classic Carhartt styling, you get seat covers that look great and protect your seats from whatever you throw at them.

Product Features:

• Custom-Patterned Seat Cover: Designed to fit your specific vehicle’s seats, ensuring a tailored appearance
• Easy Installation and Removal: Hassle-free process for quick setup and removal when needed
• Machine Washable: Easy maintenance and cleaning, allowing you to keep them looking fresh
• Carhartt Tough: Made with iconic Duck Weave fabric, triple-stitched seams, and treated with Rain Defender DWR for durability, water resistance, and rugged style
• Heavy-Duty Protection: Shields your factory seats from work, hunting, fishing, pets, and anything else you throw at them; Not only is the fabric super durable, but it is highly water-resistant to bead away any moisture, spills, or drool from your pups

Fia Leatherlite SL60 Series Custom Fit Seat Covers are engineered with soft touch simulated leather. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers, and head rest covers provide the finishing touches for a tailored exact fit for your vehicle.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Form fit wrap around design – multidirectional stretch trim molds to the contours of the seat
• Center armrest/console covers and head rest covers included (most applications)
• Fitment: Rear split seat 40/60, adjustable headrests, armest/storage compartment w/cup holder
• Material: Leatherette
• Color: Black w/Gray Center Panel

Fia Oe30 Series Custom Fit Seat Covers feature highly durable, abrasion resistant original equipment standard tweed material. Engineered to meet or exceed vehicle manufacturer standards, the advanced design creates a state-of-the-art interior. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers and head rest covers provide the finishing touches for the OEM look.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Foam padded supports in cushion and back rest for added support
• Center armrest/console covers and head rest covers included (most applications)
• Fitment: Rear split seat 40/60, adjustable headrests, armest w/cup holder. For Crew Cab.
• Material: Tweed
• Color: Charcoal

Fia Leatherlite SL60 Series Custom Fit Seat Covers are engineered with soft touch simulated leather. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers, and head rest covers provide the finishing touches for a tailored exact fit for your vehicle.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Form fit wrap around design – multidirectional stretch trim molds to the contours of the seat
• Center armrest/console covers and head rest covers included (most applications)
• Fitment: Rear split seat 40/60, adjustable headrests, armest/storage compartment w/cup holder
• Material: Leatherette
• Color: Solid Black