2023 Ford F-150 Exhaust System Kits

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 3.5 in. Mandrel Bend 409 Stainless Steel Tubing
• Maximum Flow
• Free Flow Muffler
• Polished Stainless Tip Included

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 4 in. Cat-Back System
• Hassle Free Installation
• Free-Flow Muffler
• Aggressive Sound

The MagnaFlow 2011-2014 Ford F-150 Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.7L, 5.0L, 6.2L 2011-2014 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15000 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15000 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

aFe POWER ATLAS Exhaust System is constructed out of mandrel-bent aluminized steel tubing and produce optimum flow and an aggressive sound. This system is perfect combination of performance, fit and value. Quality OE style flange and band clamps are used for a complete 360 degree sealing surface. A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip locks into the hanger bushing for an OE style fit that does not change with time. Includes an extension pipe to fit multiple cab configuration and uses factory mounting locations, providing stability and hassle-free installation.

Product Features:

• Best Combination of Performance, Fit, and Value
• Includes Stainless Steel High-Flow Muffler
• Mandrel-Bent Tubing for Improved Flow
• OE-style flanges and Stainless Clamps for Improved Sealing Surface

BORLA(R) ATAK(R) (Acoustically-Tuned Applied Kinetics) Technology Is Designed For High-Performance. ATAK(R) equipped exhaust systems deliver the highest available Decibel levels in the BORLA(R) street-legal lineup and unlike inferior brands that lose significant sound quality at higher volumes, ATAK(R) is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. ATAK(R) technology is based on specifically-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound. The power of BORLA(R) Multicore(R) technology, with the sound of vehicle-specific acoustic tuning.

Product Features:

• Designed For High-Performance
• Equipped Exhaust Systems Deliver The Highest Available Decibel Levels
• Tuned Like A Graphic Equalizer To Shape And Focus Sound Waves For Optimum High-Volume Output
• Perforation Patterns, Diameters And Other Characteristics Of The Internal Cores To Optimize Sound On A Vehicle-By-Vehicle Basis
• Sound Waves Are Attenuated And Tuned While Passing And Deflecting Through Multiple Core Walls
• Exhaust Gas Velocity Maintained Throughout Temperature Range
• ATAK(R) Technology Is Based On Specifically-Tuned Attributes Of The Internal Muffler Cores, Which Are Calibrated On A Vehicle-By-Vehicle Basis To Deliver The Mostádesirableásound

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2″ with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2″ MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22″ free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

Product Features:

• Unique Dual Center Exit Exhaust System
• High-Flow Stainless Steel Muffler
• Mandrel Bent Stainless Steel Tubing
• Bolt-On Installation

aFe introduces the MACH Force XP exhaust system for the BMW M5 F10 twin-turbo. In recent testing this system produced 18 horsepower and 30 lbs. x ft. of torque. This unique exhaust system is constructed from TIG-welded, 3 in. mandrel bent 304 stainless steel and uses quad, high-flow mufflers. This system was designed and engineered by tuning the perfect tube lengths, ultimately maximizing performance across the power band while maintaining a great tone. Also included is an X-pipe balance tube which equalizes and evenly distributes exhaust pulses for increased flow and minimizing exhaust drone. To finish off this system, aFe uses four 4 in. carbon fiber tips with 303 stainless steel machined finish inserts. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary. All aFe exhaust systems are manufactured in our Corona, California manufacturing facility.

Product Features:

• 3 in. Mandrel Bent Stainless Steel
• 100% Hand TIG Welded
• Leak Free Seal
• Aggressive Sound

aFe is proud to introduce the MACH Force-Xp “Hi-Tuck” Cat-Back exhaust system for the Ford F-150 Raptor with the V6-3.5L EcoBoost twin-turbo engine. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3″ into 3-1/2″ mandrel-bent 304 stainless steel tubing and comes complete with free-flowing high temp metallic black powder-coated muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with a dual 304 stainless steel, single wall slash cut tips for an aggressive style. Hi-Tuck: This exhaust system is finished off with Hi-Tuck tips that are developed to give you extra clearance during extreme angle climbs or descents. Gives the truck an “Old School” traditional look. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel high temp 24″ length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Dual 4″ Tips: Finishing off this system are dual 4″ diameter, 304 stainless steel tips. This is a dual rear exit system. Y-Merge Assemblies: The Y-merge assemblies evenly distributes exhaust pulses and minimizes exhaust drone to enhance the tone. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Round Muffler
• Dual Y-Merge Assemblies For Enhanced Tone
• Dual Polished 304 Stainless Steel Tips

This Atlas Cat-Back exhaust system is constructed of 4 in. mandrel-bent steel. Comes with Tubing; OE Style bayonet hangers; band clamps and all hardware necessary for a hassle free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. Installation is a snap. This system uses all factory mounting locations providing stability and a hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface eliminating leak paths. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions.

Product Features:

• Aluminized Steel
• Hassle Free Installation
• Free Flow Muffler
• Aggressive Sound

aFe is proud to introduce the MACH Force-Xp “Hi-Tuck” Cat-Back exhaust system for the Ford F-150 Raptor with the V6-3.5L EcoBoost twin-turbo engine. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3″ into 3-1/2″ mandrel-bent 304 stainless steel tubing and comes complete with free-flowing high temp metallic black powder-coated muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with a dual 304 stainless steel, single wall slash cut tips for an aggressive style. Hi-Tuck: This exhaust system is finished off with Hi-Tuck tips that are developed to give you extra clearance during extreme angle climbs or descents. Gives the truck an “Old School” traditional look. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel high temp 24″ length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Dual 4″ Tips: Finishing off this system are dual 4″ diameter, 304 stainless steel tips. This is a dual rear exit system. Y-Merge Assemblies: The Y-merge assemblies evenly distributes exhaust pulses and minimizes exhaust drone to enhance the tone. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Round Muffler
• Dual Y-Merge Assemblies For Enhanced Tone
• Dual RAW 304 Stainless Steel Tips

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

The MagnaFlow 2015-2020 Ford F-150 Street Series Cat-Back Performance Exhaust System 19497 brings out the personality of your 2.7L, 3.5L, 5.0L 2015-2020 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Before Passenger Rear Tire exit with 3.5in. Black Coated Clamp-On Double Wall Angle Cut Cut Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150’s to shame. With this system your vehicle will be producing Very Aggressive exterior and Aggressive interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19497 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19497 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow 2011-2014 Ford F-150 Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.0L 2011-2014 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Before Passenger Rear Tire exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150’s to shame. With this system your vehicle will be producing Very Aggressive exterior and Aggressive interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15101 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15101 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow Ford F-150 D-Fit Muffler Replacement Kit Performance Exhaust System with Muffler #19572 is compatible with all 2015-2023 Ford F-150s, offering enthusiasts an easy way to upgrade their trucks with the deep signature sound and dyno-proven performance that MagnaFlow exhaust systems are famous for. This easy-to-install bolt-on solution is designed to clamp on to the stock break points and replaces the restrictive factory muffler with a MagnaFlow straight-through muffler while retaining the OEM piping and tailpipe. MagnaFlow #19572 is engineered to produce a moderate level of exterior sound, allowing you to enjoy the deep rumble of your truck¿s engine while maintaining mild noise levels in the vehicle¿s interior. The exhaust kit utilizes mandrel bent 3¿ tubing and is produced using CNC precision robotic manufacturing techniques. Each exhaust system features durable 100% stainless steel construction, all backed by a limited lifetime construction warranty.

Product Features:

• 409 Stainless Steel Construction
• Mandrel Bent Stainless Steel Tubing
• Maintains the OEM piping and tailpipe