2023 Audi S3 Engine Cooling Parts
More 2023 Audi S3 Engine Cooling Parts
Find your specific 2023 Audi S3 original or aftermarket Engine Cooling Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2023 Audi S3 Engine Cooling Parts
NTK – Engine Coolant Temperature Sensor (Part No.EF0153)
from
$29.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Carquest Premium – Coolant Temperature Sensor (Part No.WTC2065)
from
$29.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Elth – Water Temp. Sensor (Part No.C6020239910ELT)
from
$22.14
Water Temp. Sensor
Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC2196)
from
$50.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest – Engine Coolant Temperature Sensor (Part No.WT7257)
from
$20.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- In manufacturing, we custom form the wax pellets for different temperature range specifications. All units are calibrated & tested to confirm switch actuation at their specified temperature
- The switch is designed using a formed bimetallic contact arm. The bimetal contact movement is achieved using the different expansion rates of two metals fused together. This is a creep action device, provides precise performance
- In production, all thermal switches are factory-calibrated to make electrical contact at the specified lower-temperature set point
- Robust design and high grade materials meet the stringent demands of today’s service professional
Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA1027)
from
$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Elring – Water Pipe O-Ring (Part No.G2026551372ELR)
from
$1.60
Water Pipe O-Ring
Febi – Water Temperature Sensor O-Ring (Part No.C606032192FEB)
from
$1.79
Water Temperature Sensor O-Ring
Rein – Cap-Expansion Tank (Part No.CPE0039)
from
$15.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10249)
from
$11.99
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Popular 2023 Audi S3 Engine Cooling Parts Categories
2023 Audi S3 Engine Cooling Parts
Maybe you’re in the middle of a full rebuild of that 2023 Audi S3. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 6 different Engine Cooling Parts in our inventory ranging from $1.60 to $50.99. That means you can find the exact parts or products you need to keep that 2023 Audi S3 running smoothly.
Engine Cooling Parts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2023 Audi S3. Rein, Elring, and Febi are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Engine Cooling Parts for your 2023 Audi S3, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2023 Audi S3 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Engine Cooling Parts Brands To Make Your 2023 Audi S3 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2023 Audi S3 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your S3 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.
FAQs for 2023 Audi S3 Engine Cooling Parts
What are the most purchased Engine Cooling Parts for the 2023 Audi S3?
Out of 6 Engine Cooling Parts for the 2023 Audi S3, the most popular in our inventory are:
from
$50.99
This product is not rated
Coolant Temperature Sensor with O-Ring
Coolant Temperature Sensors
