2022 Ford E-450 Super Duty Ignition and Tune-Up Products

Essential Ignition and Tune-Up Products for 2022 Ford E-450 Super Duties

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.74)

DiamondFIRE Automotive Spark Plug: More Power, Saves Gas

from

$8.49
The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.74 is a 14mm, 1.000 reach plug with a taper seat. It fits a wide variety of late model applications, especially Ford applications. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:
  • E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
  • Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
  • Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
  • Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
  • E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
  • The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
  • Enhanced Heat Transfer: Three legs securing the Diamond FIRE electrode to the shell ensure excellent heat transfer and create more turbulence in the cylinder.
  • Wide Compatibility: The E3.74 spark plug is a 14mm, 1.000 reach plug with a taper seat, fitting a wide variety of late model applications, especially Ford vehicles.
  • Eco-Friendly Performance: Proven to reduce fuel consumption and improve hydrocarbon emissions, contributing to a cleaner environment.
  • Long-Term Efficiency: The Diamond FIRE side wire is designed for long-term use, maintaining increased power and reduced fuel consumption over time.
See More

Motorcraft – Spark Plug (Part No.F10003269731MTR)

Spark Plug

from

$9.10
Spark Plug

Champion – Platinum Power Spark Plug: Powerful Perfromance, OE Replacement, RES8PYB5 (Part No.3017)

Platinum Power Spark Plug: Powerful Perfromance, OE Replacement, RES8PYB5

from

$4.29
The Champion Spark Plug Platinum Power Spark Plug is a premium spark plug that delivers powerful performance. It features a Platinum center electrode that ensures long life and a fine-wire center electrode that provides greater ignitability. The V-trimmed ground electrode promotes sharper spark focus, while the Heat-Active alloy allows the electrodes to reach optimal temperature quickly. The Platinum tipped center wire resists wear and helps to reduce misfires. This spark plug is an OE replacement and has a tapered seat type. It also has a resistor type. With its exclusive Heat-Active alloy and advanced design, the Champion Platinum Power spark plug is an excellent choice for those seeking reliable and high-performance spark plugs.

Product Features:
  • Platinum Power- Premium Spark Plug.‚  Powerful Performance.
  • Platinum center electrode for long life
  • Fine-wire center electrode for greater ignitability
  • V-trimmed ground electrode promotes sharper spark focus
  • Heat-Active alloy allows electrodes to reach optimal temperature
  • Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
  • OE Replacement: This spark plug is an OE replacement, which means it is designed to meet or exceed the original equipment specifications of your vehicle’s manufacturer.
  • Tapered Seat Type: The tapered seat type of this spark plug ensures a secure fit in the cylinder head, preventing any leaks or misfires that could affect engine performance.
See More

Champion – Platinum Power Spark Plug: Powerful Perfromance, OE Replacement, RS10PYC4 (Part No.3401)

Platinum Power Spark Plug: Powerful Perfromance, OE Replacement, RS10PYC4

from

$4.49
Champion Platinum Power spark plugs deliver powerful performance. Made from exclusive Heat-Active alloy, a fine-wire center electrode and V-trimmed ground electrode provides sharp spark focus.

Product Features:
  • Platinum Power- Premium Spark Plug. Powerful Performance.
  • Platinum center electrode for long life
  • Fine-wire center electrode for greater ignitability
  • V-trimmed ground electrode promotes sharper spark focus
  • Heat-Active alloy allows electrodes to reach optimal temperature
  • Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
See More

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, ITV20TT (Part No.4719)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, ITV20TT

from

$10.99
Durability of an OE style plug combined with Power & Torque of high performance.

Product Features:
  • 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
  • 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Durability of an OE style plug combined with Power & Torque of high performance.
  • Withstands temperatures greater than 4000° Fahrenheit
  • Iridium TT
See More

NGK – Coil on Plug Boot (Part No.59022)

Coil on Plug Boot

from

$7.49
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only high temperature, premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • IMPROVED HIGH TEMPERATURE DESIGN: Solves melting problems for certain very high heat applications
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-001FMP)

Coil On Plug Insulator Boot Multi Pack, Spring included

from

$49.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

Accel – Pc Cop Boots 97-11 Ford 8-Cyl (Part No.128041)

Pc Cop Boots 97-11 Ford 8-Cyl

from

$51.99
Pc Cop Boots 97-11 Ford 8-Cyl

Motorcraft – Original Equipment Spark Plug Boot: No core (outer material Rubber) Core, Qty of 1 (Part No.WR-6128)

Original Equipment Spark Plug Boot: No core (outer material Rubber) Core, Qty of 1

from

$21.79
Motorcraft Ignition Boots are engineered to provide original equipment performance and reliability. All Motorcraft parts undergo rigorous lab and real-world tests in order to meet strict Ford engineering standards. Terminal ends are designed to help ensure they do not separate from the cable under normal service conditions. High dialectic insulation helps maintain and control voltage delivery while reducing radio frequency interference. The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles

Product Features:
  • Backed by Motorcraft’s Service Parts Warranty
  • Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
  • Boots must pass submerged and pressurized leak tests, as well as low temperature cycle tests.
  • Durability tests subject boots to 225,000 performance cycles including temperature extremes from minus 40 degrees F to 275 degrees F.
  • Motorcraft ignition components help prevent false check engine lights.
See More

Bosch – Knock Sensor (Part No.0261231316)

Knock Sensor

from

$28.99
Bosch OE quality knock sensors for optimum engine protection and fuel consumption reduction up to 9%.

Product Features:
  • Bosch OE quality knock sensors for optimum engine protection
  • Bosch OE quality knock sensors increase torque up to 5%
  • Bosch OE quality knock sensors enable the use of multiple quality fuels with various anti-knock properties
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3805)

Ignition Knock (Detonation) Sensor

from

$23.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0141)

Ignition Knock (Detonation) Sensor

from

$36.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
  • NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
  • The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
See More

Forecast – Forecast Knock Sensor (Part No.F6020200559FOR)

Forecast Knock Sensor

from

$61.30
The Forecast OE quality knock sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as first equipment.

Product Features:
  • OEM quality direct fit application
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Mounting hole is the same size as OE
  • Maintains OE specifications for frequency response
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3679)

Ignition Knock (Detonation) Sensor

from

$33.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest – Ignition Switch (Part No.CS273)

Ignition Switch

from

$29.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Motorcraft – Original Equipment (O.E.) Switch Assembly – Ignition (Part No.SW-6573)

Original Equipment (O.E.) Switch Assembly - Ignition

from

$99.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:
  • Direct-fit, OE replacement parts – identical to factory installed parts. Robust design helps provide long operating life and excellent performance.
  • All OE switch functions are maintained. Factory connectors help ensure a solid, positive connection. Provided factory mounting points ensure easy installation – new gaskets and attaching hardware is included, where applicable.
See More

Carquest Premium – Ignition Switch (Part No.CSC3797)

Ignition Switch

from

$62.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Motorcraft – Original Equipment (O.E.) Switch Assembly – Ignition (Part No.SW-6958)

Original Equipment (O.E.) Switch Assembly - Ignition

from

$83.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:
  • Direct-fit, OE replacement parts – identical to factory installed parts. Robust design helps provide long operating life and excellent performance.
  • All OE switch functions are maintained. Factory connectors help ensure a solid, positive connection. Provided factory mounting points ensure easy installation – new gaskets and attaching hardware is included, where applicable.
See More

Motorcraft – Ignition Switch (Part No.M5050675470MTR)

Ignition Switch

from

$78.12
Ignition Switch

Carquest Premium – Ignition Switch (Part No.CSC2484)

Ignition Switch

from

$47.99
The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Motorcraft – Ignition Switch (Part No.M5050485141MTR)

Ignition Switch

from

$92.40
Ignition Switch

Driveworks – Ignition Coil (Part No.26326)

Ignition Coil

from

$59.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48688)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$79.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Edelbrock – COIL ON PLUG (Part No.22781)

COIL ON PLUG

from

$229.99
COIL ON PLUG

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count (Part No.EBC1045-4)

Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count

from

$344.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1045)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$117.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-6000)

Original Equipment Quality Direct Ignition Coil

from

$79.99
As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

PerTronix – Flame Thrower Coil On Plug: 1998-2009, Ford 2 Valve, 15% More Spark Energy, 8 ea, OE Replacement (Part No.30728)

Flame Thrower Coil On Plug: 1998-2009, Ford 2 Valve, 15% More Spark Energy, 8 ea, OE Replacement

from

$242.99
Flame-Thrower COP for 2 valve Ford engines feature an optimized coil design which increases the spark energy by 15% over the OEM coils. Molded epoxy prevents premature failure from moisture or winding fatigue. OEM replacement.

Product Features:
  • 30,000 Volts. Direct OEM replacement.
  • Optimized coil design yields at least 15% more energy available for the spark than the most common OEM coils.
  • Provides the spark energy throughout the RPM range and with no energy degradation up to 11,000 engine RPMs. Plated Copper terminals for added current conduction.
  • Moisture resistant construction ensures long life in harsh environments. High-temp boot sustains seal and form. Epoxy molded for shock and vibration resistance.
See More

Upgrade your 2022 Ford E-450 Super Duty with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2022 Ford E-450 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your E-450 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 14 Ignition and Tune-Up Products for the 2022 Ford E-450 Super Duty, designed to meet your needs without breaking the bank. From Ignition Switch replacements to Ignition Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 2022 Ford E-450 Super Duty at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $7.99 to $258.18, with an average price of $59.30. Our 14 Ignition and Tune-Up Products in stock come from 6 trusted brands, so you’re sure to find the right part for your 2022 Ford E-450 Super Duty without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2022 Ford E-450 Super Duty, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like NGK, Motorcraft, E3, and more. NGK Ignition and Tune-Up Products start at just $13.99 and boast an impressive 5 stars average rating from customers. Motorcraft and E3 also bring quality to the table, with Ignition and Tune-Up Products available starting at $7.99, and at an average 5 stars rating. With 178 customer reviews and counting, our 2022 Ford E-450 Super Duty Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2022 Ford E-450 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your E-450 Super Duty in top shape, all in one place. Start shopping confidently below for your 2022 Ford E-450 Super Duty!

Best-Selling Ignition Switches for 2022 Ford E-450 Super Duties

Enhance the driving experience in your Ford with 3 quality Ignition Switch components, starting at $70.99.

Carquest Premium – Ignition Switch (Part No.CSC1044)

Ignition Switch

from

$70.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Motorcraft – Original Equipment (O.E.) Switch Assembly – Ignition (Part No.SW-6958)

Original Equipment (O.E.) Switch Assembly - Ignition

from

$83.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:
  • Direct-fit, OE replacement parts – identical to factory installed parts. Robust design helps provide long operating life and excellent performance.
  • All OE switch functions are maintained. Factory connectors help ensure a solid, positive connection. Provided factory mounting points ensure easy installation – new gaskets and attaching hardware is included, where applicable.
See More

Motorcraft – Ignition Switch (Part No.M5050485141MTR)

Ignition Switch

from

$92.40
Ignition Switch

Most Popular 2022 Ford E-450 Super Duty Ignition Sensors

Customize your Ford with 1 Ignition Sensors products like Knock Sensors, all priced under $23.99.

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3805)

Ignition Knock (Detonation) Sensor

from

$23.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Top Picks for 2022 Ford E-450 Super Duty Ignition Coils and Boots

Upgrade Ford E-450 Super Duties with top-quality Ignition Coils and Boots parts, including 2 OEM and aftermarket selections for your 2022 model.

Worldpac – DIRECT IGNITION COIL (Part No.F30053386988MTR)

DIRECT IGNITION COIL

from

$258.18
DIRECT IGNITION COIL

Carquest Premium – Ignition Coil (Part No.EBA2001)

Ignition Coil

from

$201.99
Ignition Coil

In-Demand Spark Plugs for 2022 Ford E-450 Super Duties

Select from 7 premium Spark Plugs parts for your 2022 Ford E-450 Super Duty, with prices ranging from $7.99 to $14.79.

NGK – Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, LTR7BHX (Part No.95605)

Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, LTR7BHX

from

$14.79
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug; Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.

Product Features:
  • HIGH IGNITABILITY PROJECTED SQUARE PLATINUM ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with a unique cut-back PSPE ground electrode
  • RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
  • PSPE DESIGN: Projected square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modern vehicles using OE PSPE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
  • Enhanced Fuel Burn: Provides a more complete fuel burn, resulting in quicker throttle response, smoother idle, and better cold starts.
  • Industry-Leading Durability: Ruthenium center electrode ensures exceptional durability and longevity.
See More

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.74)

DiamondFIRE Automotive Spark Plug: More Power, Saves Gas

from

$8.49
The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.74 is a 14mm, 1.000 reach plug with a taper seat. It fits a wide variety of late model applications, especially Ford applications. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:
  • E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
  • Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
  • Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
  • Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
  • E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
  • The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
  • Enhanced Heat Transfer: Three legs securing the Diamond FIRE electrode to the shell ensure excellent heat transfer and create more turbulence in the cylinder.
  • Wide Compatibility: The E3.74 spark plug is a 14mm, 1.000 reach plug with a taper seat, fitting a wide variety of late model applications, especially Ford vehicles.
  • Eco-Friendly Performance: Proven to reduce fuel consumption and improve hydrocarbon emissions, contributing to a cleaner environment.
  • Long-Term Efficiency: The Diamond FIRE side wire is designed for long-term use, maintaining increased power and reduced fuel consumption over time.
See More

NGK – OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, LTR7CP13 (Part No.94862)

OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, LTR7CP13

from

$13.99
NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
  • PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
See More

DENSO – Iridium Power Spark Plug (Part No.F1000312474ND)

Iridium Power Spark Plug

from

$13.24
DENSO Iridium Power spark plugs represent a performance breakthrough. The laser-welded center electrode is only 0.4mm in diameter – the slimmest iridium electrode in the industry. The taper-cut side electrode complements the design, delivering reliable spark energy under the most gruelling pressures and temperatures. DENSO engineers used the power of this miraculous metal to produce an iridium center electrode that is only 0.4mm in diameter. With its superior thermal qualities, this whisker-fine electrode is capable of taking the most extreme heat and punishment. This breakthrough was matched to one of DENSO’s most famous innovations, the patented U-Groove ground electrode. The combination of these two features resulted in the Iridium Power® plug, one of the most advanced and innovative spark plugs on the market.

Product Features:
  • Tapered cut, U-Groove ground electrode
  • 0.4mm iridium center electrode
  • 360-degree laser welding assembly process
  • Required ignition voltage reduced
  • Unsurpassed center electrode durability
  • Available for many performance and power sports applications, including Corvette, Viper, and Harley-Davidson The Iridium Power plug delivers greater spark energy while demanding significantly less secondary required voltage from the ignition system.
See More

Motorcraft – Original Equipment Platinum Iridium Spark Plug (Part No.F1000411669MTR)

Original Equipment Platinum Iridium Spark Plug

from

$9.33
Motorcraft Original Equipment Platinum Iridium spark plugs are designed, engineered and recommended by Ford Motor Company.

Product Features:
  • Same part installed when the engine rolled off the assembly line
  • 100,000-mile service interval
  • Platinum ball on the center electrode minimizes gap erosion for longer life
  • Proprietary platinum ball welding process provides a consistent point of contact for better adhesion
  • Fewer misfires and reduced gap erosion
  • Optimizes engine performance to provide improved fuel economy
See More

Motorcraft – Spark Plug (Part No.F10003269731MTR)

Spark Plug

from

$9.10
Spark Plug

Motorcraft – High-Performance Spark Plug: Enhances Fuel Efficiency (Part No.SP-589)

High-Performance Spark Plug: Enhances Fuel Efficiency

from

$7.99
Engineered for superior ignition performance, the Motorcraft High-Performance Spark Plug is designed to optimize fuel efficiency and ensure reliable starts. Crafted with precision, this spark plug offers exceptional durability and consistent performance, making it an ideal choice for maintaining your vehicle’s peak performance. Upgrade to Motorcraft and experience the difference in your engine’s responsiveness and fuel economy.

Product Features:
  • Enhances Fuel Efficiency: The Motorcraft High-Performance Spark Plug is specifically designed to optimize fuel efficiency, helping you save on fuel costs.
  • Superior Ignition Performance: Engineered for superior ignition performance, this spark plug ensures reliable starts every time.
  • Exceptional Durability: Crafted with precision, the Motorcraft High-Performance Spark Plug offers exceptional durability, providing long-lasting performance.
  • Consistent Performance: This spark plug delivers consistent performance, making it an ideal choice for maintaining your vehicle’s peak performance.
  • Improved Engine Responsiveness: Upgrade to Motorcraft and experience a noticeable difference in your engine’s responsiveness and overall fuel economy.
  • Enhances Fuel Efficiency: The Motorcraft High-Performance Spark Plug is specifically designed to optimize fuel efficiency, helping you save on fuel costs.
  • Superior Ignition Performance: Engineered for superior ignition performance, this spark plug ensures reliable starts every time.
  • Exceptional Durability: Crafted with precision, the Motorcraft High-Performance Spark Plug offers exceptional durability, providing long-lasting performance.
  • Consistent Performance: This spark plug delivers consistent performance, making it an ideal choice for maintaining your vehicle’s peak performance.
  • Improved Engine Responsiveness: Upgrade to Motorcraft and experience a noticeable difference in your engine’s responsiveness and overall fuel economy.
See More

Most Sold 2022 Ford E-450 Super Duty Ignition Boots

Explore our best-selling Ford parts for the 2022 E-450 Super Duty among 1 OEM and aftermarket options starting from $21.79.

Motorcraft – Original Equipment Spark Plug Boot: No core (outer material Rubber) Core, Qty of 1 (Part No.WR-6128)

Original Equipment Spark Plug Boot: No core (outer material Rubber) Core, Qty of 1

from

$21.79
Motorcraft Ignition Boots are engineered to provide original equipment performance and reliability. All Motorcraft parts undergo rigorous lab and real-world tests in order to meet strict Ford engineering standards. Terminal ends are designed to help ensure they do not separate from the cable under normal service conditions. High dialectic insulation helps maintain and control voltage delivery while reducing radio frequency interference. The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles

Product Features:
  • Backed by Motorcraft’s Service Parts Warranty
  • Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
  • Boots must pass submerged and pressurized leak tests, as well as low temperature cycle tests.
  • Durability tests subject boots to 225,000 performance cycles including temperature extremes from minus 40 degrees F to 275 degrees F.
  • Motorcraft ignition components help prevent false check engine lights.
See More

Top-Rated Ignition and Tune-Up Products Brands For Your 2022 Ford E-450 Super Duty

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 2022 Ford E-450 Super Duties. Below you’ll find some of our best rated Ignition and Tune-Up Products from NGK, Motorcraft, and E3, and more. Ignition and Tune-Up Products from these brands that fit a 2022 E-450 Super Duty start at just $7.99 and are rated as high as 5 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular NGK 2022 Ford E-450 Super Duty Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2022 Ford E-450 Super Duty, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. NGK ticks all of those boxes. We offer a wide selection of NGK Ignition and Tune-Up Products, specifically designed for the 2022 Ford E-450 Super Duty. With over 2 NGK brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.99, with an average price of just $14.39. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our NGK Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, LTR7BHX
from
$14.79

(1)

Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, LTR7BHX

“I got these for my 2019 Mustang Ecoboost and these were way better spark plugs then anything i have tried definitely a performance oriented, spark plu”

OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, LTR7CP13
from
$13.99
This product is not rated

OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, LTR7CP13

“”

Popular Motorcraft 2022 Ford E-450 Super Duty Ignition and Tune-Up Products

Motorcraft auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 2022 Ford E-450 Super Duty owner should feel confident when installing genuine Motorcraft parts in their vehicle. To ensure the best fit and performance for your 2022 E-450 Super Duty, Advance Auto Parts carries a full inventory of 6 Motorcraft Ignition and Tune-Up Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Motorcraft Ignition and Tune-Up Products range from $7.99 to $92.40, plus, with more than 1 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

Original Equipment Platinum Iridium Spark Plug
from
$9.33
This product is not rated

Original Equipment Platinum Iridium Spark Plug

“”

Original Equipment (O.E.) Switch Assembly - Ignition
from
$83.99
This product is not rated

Original Equipment (O.E.) Switch Assembly – Ignition

“”

Ignition Switch
from
$92.4
This product is not rated

Ignition Switch

“”

FAQs for 2022 Ford E-450 Super Duty Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 2022 Ford E-450 Super Duties?

Out of 14 Ignition and Tune-Up Products that fit 2022 Ford E-450 Super Duties, the following parts are the top sellers:

What’s the price range for 2022 Ford E-450 Super Duty Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 2022 Ford E-450 Super Duty start at $7.99 and go up to $258.18 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 2022 Ford E-450 Super Duty?

The average price for Ignition and Tune-Up Products for the 2022 Ford E-450 Super Duty is $59.30. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Ford E-450 Super Duty model years?

Yes, we currently carry Ignition and Tune-Up Products for 20 model years of Ford E-450 Super Duties between 2003 and 2025. Ignition and Tune-Up Products are bought most frequently for the following model years: 2023, 2024, 2021, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Ignition and Tune-Up Products for my 2022 Ford E-450 Super Duty?

The cheapest 2022 Ford E-450 Super Duty Ignition and Tune-Up Products we carry in stock are:

What are the top-rated Ignition and Tune-Up Products that fit the 2022 Ford E-450 Super Duty?

Out of 178 reviews by customers, our 2022 Ford E-450 Super Duty Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 2022 Ford E-450 Super Duty and their top-rated products:

What types of Ignition and Tune-Up Products do you sell for my 2022 Ford E-450 Super Duty?

As of 2/5/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 2022 Ford E-450 Super Duty:

Can I get help with 2022 Ford E-450 Super Duty Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Ignition and Tune-Up Products and more.

What is your return policy for Ford E-450 Super Duty Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Ford E-450 Super Duty Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.