2022 Dodge Durango Engine Parts
More 2022 Dodge Durango Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 2022 Dodge Durango, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 2022 Dodge Durango Engine Parts
Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.MS 95462)
from
$18.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
WSO – Camshaft Position Se (Part No.A4015341220WSO)
from
$31.28
Camshaft Position Se
Elring – Crankshaft Seal (Part No.A8060368232ELR)
from
$28.90
Crankshaft Seal
PowerBond – Premium OEM Replacement Harmonic Balancer; 183mm Diameter (Part No.PB1186N)
from
$82.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
Cloyes Gear – Engine Timing Chain (Part No.C393)
from
$49.99
A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Felpro – TIMING COVER GASKET SET (Part No.TCS 46162)
from
$77.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Cloyes Gear – Engine Timing Chain Guide (Part No.9-5599)
from
$12.99
A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, timing guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Designed to meet or exceed OEM performance requirements
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5489)
from
$28.99
A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Meet or exceed OEM performance requirements
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Carquest Premium – Crankshaft Sensor (Part No.CSC1136)
from
$22.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including the
Product Features:
See More
Product Features:
- Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
- Manufactured in an anti-static environment to ensure reliability and stability.
- Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
- Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.3280)
from
$70.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHRY 12-14; DODGE 11-22; JEEP 11-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2011-2022
- Weight approx: 4 Lbs
- HYDRAULIC
- PART GROUP: 3280, 3280
- DISCARD TOP BLOCK IF NOT NEEDED
Felpro – Oil Pan Gasket Set PermaDry Molded Rubber W/ Gasket Sealant W/ Snap-Ups® 7 Piece (Part No.OS 30750 R)
from
$72.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Dorman – Steel Cup Expansion Plug 45/64 In., Height 0.220 (sold by each) (Part No.555-082)
from
$1.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Mahle – Valve Cover Gasket Set (Part No.A8029845307MAH)
from
$73.73
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Utilizes OE equivalent or better materials
- Packaged in shrink wrapped tray
- Every part you need to complete your gasket repair in one package unless otherwise stated
NTK – Engine Coolant Temperature Sensor (Part No.EF0034)
from
$32.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 120, 44 Links, Timing/Oil Pump Components, With Sprockets (Part No.9-0511S)
from
$429.99
Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.
Product Features:
See More
Product Features:
- Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
- Utilizes the latest in design and technology to offer a complete chain kit solution
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Dorman – Multiple Displacement Solenoid (Part No.916-511XD)
from
$113.99
Certain MDS solenoids have plastic housings and low-grade O-rings that fail in extreme heat. This Dorman OE FIX solution upgrades the plastic housing to aluminum and adds premium, compression-tested O-rings to prevent premature failures.
Product Features:
See More
Product Features:
- Upgraded design – this MDS solenoid replaces the original plastic housing with full aluminum construction for greater durability
- Complete assembly – solenoid includes new gasket and mounting bolt for a complete repair
- Application specific – made to directly replace the original MDS solenoid on certain Chrysler, Dodge and Jeep applications from 2005 to 2009
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1422)
from
$107.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Melling – Stock Replacement OE Type Oil Pump (Part No.M342)
from
$188.99
Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality
National – Shaft Repair Sleeve (Part No.99189)
from
$38.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Driveworks – Main Bearing Repair Sleeve (Part No.S-99181)
National – Oil Seal (Part No.711030)
from
$184.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
MAHLE Original – REAR MAIN SEAL (Part No.67964)
from
$87.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S1023)
from
$46.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S889)
from
$31.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
National – Shaft Repair Sleeve (Part No.99393)
from
$32.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Felpro – Engine Crankshaft Seal Kit (Part No.BS 40181)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Mahle – Oil Pick-up Tube Gas (Part No.A62761159653MAH)
from
$2.35
Oil Pick-up Tube Gas
Popular 2022 Dodge Durango Engine Parts Categories
2022 Dodge Durango Engine Parts
You count on your 2022 Dodge Durango to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 45 Engine Parts ranging in price from $2.35 to $179.99, you’re sure to find everything you need for your 2022 Dodge Durango.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 10 different brands like Felpro, Carquest Premium, and Anchor. 2022 Dodge Durango Engine Parts start as low as $2.35!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 144 extensive product reviews on 2022 Dodge Durango Engine Parts. Some of the top-rated Engine Parts products we carry are Harmonic Balancer Assembly with 5.0 stars.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 2022 Dodge Durango below to get started!
Top-Rated Engine Parts Brands For Your 2022 Dodge Durango
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2022 Dodge Durango running right for years to come. In our inventory you’ll find brands like Felpro, Carquest Premium, Anchor, and even more.
Popular Anchor Engine Parts
You’ll find popular Anchor brand products across Engine Mounts. All are waiting to get your 2022 Dodge Durango back on the road. Some of the top-rated Anchor products in these categories are:
Top-Rated Felpro Engine Parts
If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Engine Parts for your 2022 Dodge Durango, and some of our most reviewed Felpro parts include:
FAQs for 2022 Dodge Durango Engine Parts
What are the most purchased Engine Parts for the 2022 Dodge Durango?
Out of 45 Engine Parts for the 2022 Dodge Durango, the most popular in our inventory are:
What are the top-rated 2022 Dodge Durango Engine Parts?
Top-rated Engine Parts for your 2022 Dodge Durango based on customer reviews/ratings are:
