2021 Jeep Wrangler Drivetrains

Essential Drivetrains for 2021 Jeep Wranglers

Yukon Gear – Bearing Install Kit For Dana 44 JK Rubicon Reverse Front Differential (Part No.11109)

Bearing Install Kit For Dana 44 JK Rubicon Reverse Front Differential

from

$384.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits reverse rotation Dana Spicer 44 JK Rubicon
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , oil baffles and slingers , marking compound and brush.
See More

Spicer – INNER GEAR KIT (Part No.708184)

INNER GEAR KIT

from

$244.99
INNER GEAR KIT

Yukon Gear – Zip Locker For Dana 44 With 30 Spline Axles, 3.92 & Up (Part No.34020)

Zip Locker For Dana 44 With 30 Spline Axles, 3.92 & Up

from

$1302.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

Product Features:
  • Fits Dana Spicer 44 with 30 spline axles
  • 3.92 and up ratio only
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

Spicer – Axle Shft Univ Joint (Part No.5-7166X)

Axle Shft Univ Joint

from

$85.99
Axle Shft Univ Joint

Yukon Gear – Drive Shaft – Front (Part No.45025)

Drive Shaft - Front

from

$1201.99
Drive Shaft – Front

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-3010)

Drive Shaft: Not Greasable, Direct Replacement

from

$899.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

National – Multi Purpose Seal (Part No.710046)

Multi Purpose Seal

from

$17.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Crown Auto Jeep Replacmnt – OE Replacement, Np231 (Part No.83503147)

OE Replacement, Np231

from

$8.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More

USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 44 In A 4.56 Ratio (Part No.36044)

Replacement Ring & Pinion Gear Set For Dana 44 In A 4.56 Ratio

from

$281.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits standard rotation Dana Spicer 44
  • 8.50″ ring gear diameter
  • 26 spline pinion
  • 10 ring gear bolts
  • 4.56 ratio
See More

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 44JK In A 4.56 Ratio (Part No.24212)

High Performance Replacement Ring & Pinion Gear Set For Dana 44JK In A 4.56 Ratio

from

$414.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits reverse rotation Dana Spicer 44 JK Rubicon
  • 8.50″ ring gear diameter
  • Fits Dana Spicer 44 JK rear
  • 8.89″ ring gear diameter
  • 24 spline pinion
  • 10 ring gear bolts
  • 4.56 ratio
See More

Yukon Gear – Aluminum Girdle Replacement Cover For Dana 44 Ta HD (Part No.32110)

Aluminum Girdle Replacement Cover For Dana 44 Ta HD

from

$359.99
Aluminum Girdle replacement cover for Dana 44 TA HD.

Product Features:
  • Fits standard rotation Dana Spicer 44
  • Aluminum girdle cover
See More

Dorman – Differential Cover Assembly (Part No.697-728)

Differential Cover Assembly

from

$71.99
This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:
  • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
  • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
  • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (Part No.887344)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon

from

$69.99
Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
  • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
See More

NTN – Axle Shaft Bearing (Part No.K4010161677NTN)

Axle Shaft Bearing

from

$90.72
Axle Shaft Bearing

FAG US – AXLE BEARING (Part No.FC67147)

AXLE BEARING

from

$36.49
AXLE BEARING

Motive Gear – Differential Pinion Shim Kit (Part No.1112)

Differential Pinion Shim Kit

from

$16.99


Product Features:
  • PINION SHIM-DANA 30,35.50
See More

Yukon Gear – Replacement Shim Kit For Dana 30, Front & Rear, Also D36Ica & Dana 44Ica (Part No.55023)

Replacement Shim Kit For Dana 30, Front & Rear, Also D36Ica & Dana 44Ica

from

$86.99
Replacement shim kit for Dana 30, front & rear, also D36ICA & Dana 44ICA.

Product Features:
  • Complete shim kit for Dana Spicer 30 front and rear, also Dana Spicer 36
See More

Pro-King – Differential Ring Gear Bolt (Part No.742E935)

Differential Ring Gear Bolt

from

$1.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – 7/16" To 3/8" Ring Gear Bolt Spacer Sleeve. (Part No.33056)

7/16" To 3/8" Ring Gear Bolt Spacer Sleeve.

from

$7.99
7/16″ TO 3/8″ ring gear bolt spacer sleeve.

Product Features:
  • Ring gear bolt sleeve
  • Adapts 7/16″ to 3/8″
See More

National – Multi Purpose Seal (Part No.710627)

Multi Purpose Seal

from

$24.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Omix – Transfer Case Input Shaft Oil Seal (Part No.18680.13)

Transfer Case Input Shaft Oil Seal

from

$24.99
Tired of looking at the stains on your driveway? Gaskets are a cheap solution to prevent or stop leaks. Omix-ADA offers high quality replacement gaskets designed specifically for your Jeep.

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (Sold by each) (Part No.615-095)

Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (Sold by each)

from

$10.79
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Spindle Nut Kit For Dana 30, Dana 44 & GM 8.5" – Not CJ Or Scout (Part No.33475)

Spindle Nut Kit For Dana 30, Dana 44 & GM 8.5" - Not CJ Or Scout

from

$37.99
Spindle nut kit for Dana 30, Dana 44 & GM 8.5″. Not CJ or Scout. This replaces Spicer part number 28068X.

Product Features:
  • Spindle nut kit for Dana Spicer 30, Dana Spicer 44 and GM 8.5″
  • Will not fit Jeep CJ or Scout applications
See More

Dorman – Spindle Nut M24-1.5 Hex Size 36mm (Sold by each) (Part No.615-096)

Spindle Nut M24-1.5 Hex Size 36mm (Sold by each)

from

$11.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Transfer Case Switch (Part No.J7101397467DOR)

Transfer Case Switch

from

$40.65
The harsh conditions underneath your car can degrade exposed parts. However, Dorman’s Transfer Case Switch resists corrosion and water intrusion, meaning that your Four-Wheel Drive smoothly and consistently engages.

Product Features:
  • Direct replacement for a proper fit every time
  • Easy to install
  • Weather-resistant for long-lasting use
  • Quality tested to ensure durability
See More

Dorman – 4WD Switch, Transfer Case Mounted, Electric (Part No.600-551)

4WD Switch, Transfer Case Mounted, Electric

from

$20.99
This transfer case switch directly replaces the original equipment switch on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this 4WD switch matches the fit and function of the original switch on specific vehicle applications
  • Effective fix – restores proper 4WD operation after original switch degrades and fails
  • Durable construction – built for reliable longevity, free of defects in materials and craftmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Dorman – Help – Transfer Case Switch (Part No.49314)

Transfer Case Switch

from

$21.99
This transfer case switch directly replaces the original equipment switch on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this 4WD switch matches the fit and function of the original switch on specific vehicle applications.
  • Effective fix – restores proper 4WD operation after original switch degrades and fails
  • Durable construction – built for reliable longevity, free of defects in materials and craftmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Upgrade your 2021 Jeep Wrangler with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2021 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Drivetrains are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 42 Drivetrains for the 2021 Jeep Wrangler, designed to meet your needs without breaking the bank. From Spindle replacements to Transfer Cases upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2021 Jeep Wrangler at great prices. Our Drivetrains inventory for this model ranges from just $5.49 to $1,036.99, with an average price of $226.99. Our 42 Drivetrains in stock come from 11 trusted brands, so you’re sure to find the right part for your 2021 Jeep Wrangler without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2021 Jeep Wrangler, we stock popular OEM and aftermarket Drivetrains from top names like Royal Purple, Valvoline, Spicer, and more. Royal Purple Drivetrains start at just $12.99 and boast an impressive 5 stars average rating from customers. Valvoline and Spicer also bring quality to the table, with Drivetrains available starting at $19.99, and at an average 5 stars rating. With 12,696 customer reviews and counting, our 2021 Jeep Wrangler Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2021 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place. Start shopping confidently below for your 2021 Jeep Wrangler!

Best-Selling Spindles for 2021 Jeep Wranglers

Enhance the driving experience in your Jeep with 2 quality Spindle components, starting at $10.79.

Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (Part No.05177)

Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm

from

$11.79
Our Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (Sold by each) (Part No.615-095)

Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (Sold by each)

from

$10.79
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Most Popular 2021 Jeep Wrangler Transfer Cases

Customize your Jeep with 4 Transfer Cases products like Transfer Case Output Shaft Seals, Input Shaft Seals, and Transfer Case Switches, all priced under $87.99.

Dorman – Transfer Case Indicator Mode Switch (Part No.600-555)

Transfer Case Indicator Mode Switch

from

$87.99
This transfer case switch directly replaces the original equipment switch on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this 4WD switch matches the fit and function of the original switch on specific vehicle applications.
  • Effective fix – restores proper 4WD operation after original switch degrades and fails.
  • Durable construction – built for reliable longevity, free of defects in materials and craftmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

SKF – Trans Case Input Sft (Part No.J7120366730SKF)

Trans Case Input Sft

from

$45.78
Trans Case Input Sft

SKF – Output Shaft Seal (Part No.J1157216245SKF)

Output Shaft Seal

from

$36.10
Output Shaft Seal

SKF – Trans Case Input Sft (Part No.J7120366723SKF)

Trans Case Input Sft

from

$23.71
Trans Case Input Sft

Top Picks for 2021 Jeep Wrangler Drive Shafts and Axles

Upgrade Jeep Wranglers with top-quality Drive Shafts and Axles parts, including 8 OEM and aftermarket selections for your 2021 model.

Spicer – Universal Joint (Part No.5-1310X)

Universal Joint

from

$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Spicer – Universal Joint (Part No.5-1350X)

Universal Joint

from

$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Dorman – Spindle Nut (Part No.K10021062725DOR)

Spindle Nut

from

$17.00
Spindle Nut

NTN – Axle Shaft Bearing (Part No.K4010161677NTN)

Axle Shaft Bearing

from

$90.72
Axle Shaft Bearing

Yukon Gear – Drive Shaft – Rear (Part No.45029)

Drive Shaft - Rear

from

$1036.99
Drive Shaft – Rear

Yukon Gear – Drive Shaft – Front (Part No.45030)

Drive Shaft - Front

from

$1036.99
Drive Shaft – Front

Yukon Gear – Drive Shaft – Front (Part No.45028)

Drive Shaft - Front

from

$1036.99
Drive Shaft – Front

Spicer – Axle Shft Univ Joint (Part No.5-7166X)

Axle Shft Univ Joint

from

$85.99
Axle Shft Univ Joint

In-Demand Differentials for 2021 Jeep Wranglers

Select from 28 premium Differentials parts for your 2021 Jeep Wrangler, with prices ranging from $5.49 to $439.99.

Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)

High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT

from

$12.99
High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

Product Features:
  • Better Wear Protection
  • Increased Protection against Low Speed Pre-Ignition
  • Increased Fuel Efficiency
  • Better Protection for Vehicle Exhaust Emissions Equipment
  • Improved Compatibility with Fuels Containing Ethanol
  • Superior Corrosion Protection
  • Made in USA
See More

Royal Purple – MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (Part No.01301)

MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT

from

$25.99
Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:
  • Maximizes horsepower
  • Extends gear and bearing life
  • Reduces operating temperature
  • Lower coefficient of friction
  • Superior corrosion protection
  • Separates rapidly from water
  • For use with open, limited-slip and locking differential
  • Contains limited-slip friction modifier
  • Made in USA
See More

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (Part No.887344)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon

from

$69.99
Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
  • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
See More

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart (Part No.889787)

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart

from

$19.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:
  • FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
  • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
See More

Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart) (Part No.11744)

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

from

$12.99
Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:
  • Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
  • Formulated with robust zinc/phosphorus anti-wear compounds combined with royal purple’s proprietary additive technology
  • Hmx is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
  • Reduces friction and metal-to-metal contact for peak engine performance
  • Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
  • High-Mileage Formula: Specifically designed for engines with more than 75,000 miles, this full synthetic engine oil helps minimize wear and restore lost performance.
See More

Motive Gear – Ring Gear Bolt (Part No.F75Z4216AA)

Ring Gear Bolt

from

$5.49


Product Features:
  • F9.75″ RING GEAR BOLT SOLD INDIVIDUALLY
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1112)

Differential Pinion Shim Kit

from

$16.99


Product Features:
  • PINION SHIM-DANA 30,35.50
See More

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 30 With 27 Spline Axles (Part No.16073)

Replacement Standard Open Spider Gear Kit For Dana 30 With 27 Spline Axles

from

$155.99
Yukon replacement standard open spider gear kit for Dana 30 with 27 spline axles and with or without quick disconnect. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Dana Spicer 30 open differential with 27 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Ring&Pinion Gear Set (Part No.24801)

Ring&Pinion Gear Set

from

$439.99
Ring&Pinion Gear Set

Yukon Gear – Ring&Pinion Gear Set (Part No.24807)

Ring&Pinion Gear Set

from

$429.99
Ring&Pinion Gear Set

Powertrax – Grip PRO Traction System (Part No.GT443027)

Grip PRO Traction System

from

$427.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

aFe POWER – Differential Cover (Part No.46-71031B)

Differential Cover

from

$397.99
aFe Power’s new front differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs for maximum strength. This cover comes with all necessary hardware for easy installation. Pro Series differential covers include an oil level sight glass and magnetic deep reach fill plug. This cover is finished with black powder-coating and machined fins for a distinctive look. PRO Guard D2 Synthetic 75W-90 Gear Oil: The supplied gear oil (2 quarts) exceeds the performance requirements of API GL-5 recommended for both open and limited slip applications. Increased Oil Capacity: This cover has an increased oil capacity over stock for better performance over a longer duration. Built-in Internal/External Fins: Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling. Magnetic Plugs: This system incorporates a magnetic drain and deep reach fill plug to capture loose particles for maximum protection. Calibration Plug: Calibration plug set to the factory oil level to eliminate overfilling. Oil Level Sight Glass: A pre-installed oil level sight glass allows quick and easy oil inspection. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:
  • Constructed out of durable cast aluminum
  • Wrinkle-black powder-coating with machined fins
  • Dual neodymium magnetic plugs are used for maximum gear protection
  • Large oil level sight glass with calibration plug set to the factory oil level to eliminate overfilling
See More

aFe POWER – Differential Cover (Part No.46-71011B)

Differential Cover

from

$397.99
aFe Power’s new front differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs for maximum strength. This cover comes with all

Product Features:
  • Durable Cast Aluminum
  • Magnetic Drain and Fill Plugs Capture Loose Particles
  • Calibration Plug Set to Factory Fill Level Eliminates Overfilling
  • Oil Level Sight Glass for Quick/Easy Inspection
See More

Yukon Gear – DiffrlPartsKit (Part No.14231)

DiffrlPartsKit

from

$384.99
DiffrlPartsKit

aFe POWER – Differential Cover (Part No.46-71030R)

Differential Cover

from

$374.00
aFe Power’s new front differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs for maximum strength. This cover comes with all necessary hardware for easy installation. Pro Series differential covers include an oil level sight glass and magnetic deep reach fill plug. This cover is finished with red powder-coating and machined fins for a distinctive look. Increased Oil Capacity: This cover has an increased oil capacity over stock for better performance over a longer duration. Built-in Internal/External Fins: Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling. Magnetic Plugs: This system incorporates a magnetic drain and deep reach fill plug to capture loose particles for maximum protection. Calibration Plug: Calibration plug set to the factory oil level to eliminate overfilling. Oil Level Sight Glass: A pre-installed oil level sight glass allows quick and easy oil inspection. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:
  • Constructed out of durable cast aluminum
  • Red powder-coating with machined fins
  • Dual neodymium magnetic plugs are used for maximum gear protection
  • Large oil level sight glass with calibration plug set to the factory oil level to eliminate overfilling
See More

aFe POWER – Differential Cover (Part No.46-71000R)

Differential Cover

from

$374.00
aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and a red powder coated finish with machined fins for maximum strength and styling. This cover comes with all necessary hardware for easy installation. The Pro Series differential covers include a oil level sight glass. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum front-end protection. Also included is a 1/8″ NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.

Product Features:
  • Durable Cast Aluminum
  • Magnetic Drain and Fill Plugs Capture Loose Particles
  • Calibration Plug Set to Factory Fill Level Eliminates Overfilling
  • Oil Level Sight Glass for Quick/Easy Inspection
See More

aFe POWER – Differential Cover (Part No.46-71010R)

Differential Cover

from

$374.00
aFe Power’s new front differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and machined fins for maximum strength and styling. This cover comes with all necessary hardware for easy installation. The Pro Series differential covers include a oil level sight glass. This cover has about a 2 quart lube capacity at the factory line. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum front-end protection. Also included is a 1/8″ NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.

Product Features:
  • Durable Cast Aluminum
  • Magnetic Drain and Fill Plugs Capture Loose Particles
  • Calibration Plug Set to Factory Fill Level Eliminates Overfilling
  • Oil Level Sight Glass for Quick/Easy Inspection
See More

Yukon Gear – MstrDffrntlRebuildKt (Part No.14235)

MstrDffrntlRebuildKt

from

$369.99
MstrDffrntlRebuildKt

aFe POWER – Differential Cover (Part No.46-71030B)

Differential Cover

from

$355.00
aFe Power’s new front differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs for maximum strength. This cover comes with all

Product Features:
  • Constructed out of durable cast aluminum
  • Wrinkle-black powder-coating with machined fins
  • Dual neodymium magnetic plugs are used for maximum gear protection
  • Large oil level sight glass with calibration plug set to the factory oil level to eliminate overfilling
See More

aFe POWER – Differential Cover (Part No.46-71000B)

Differential Cover

from

$355.00
aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and a black powder coated finish with machined fins for maximum strength and styling. This cover comes with all necessary hardware for easy installation. The Pro Series differential covers include a oil level sight glass. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum front-end protection. Also included is a 1/8″ NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.

Product Features:
  • Durable Cast Aluminum
  • Magnetic Drain and Fill Plugs Capture Loose Particles
  • Calibration Plug Set to Factory Fill Level Eliminates Overfilling
  • Oil Level Sight Glass for Quick/Easy Inspection
See More

aFe POWER – Differential Cover (Part No.46-71010B)

Differential Cover

from

$355.00
aFe Power’s new front differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and machined fins for maximum strength and styling. This cover comes with all necessary hardware for easy installation. The Pro Series differential covers include a oil level sight glass. This cover has about a 2 quart lube capacity at the factory line. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum front-end protection. Also included is a 1/8″ NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.

Product Features:
  • Durable Cast Aluminum
  • Magnetic Drain and Fill Plugs Capture Loose Particles
  • Calibration Plug Set to Factory Fill Level Eliminates Overfilling
  • Oil Level Sight Glass for Quick/Easy Inspection
See More

aFe POWER – Differential Cover (Part No.46-71000A)

Differential Cover

from

$304.99
aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and machined fins for maximum strength and styling. This cover comes with all necessary hardware for easy installation. This cover fits 18-20 Jeep Wrangler (JL) with Dana M220 12 bolt rear axles. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum rear-end protection. Also included is a 1/8″ NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.

Product Features:
  • Durable Cast Aluminum
  • Magnetic Drain Plug Captures Loose Particles
  • Calibration Plug Set to Factory Fill Level Eliminates Overfilling
  • Built-In External and Internal Fins Dissipate Heat
See More

aFe POWER – Differential Cover (Part No.46-71010A)

Differential Cover

from

$304.99
aFe Power’s new front differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and machined fins for maximum strength and styling. This cover comes with all necessary hardware for easy installation. This cover fits 18-20 Jeep Wrangler (JL) Sport Dana M186 12 bolt front axles. This cover has about a 2 quart lube capacity at the factory line. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum front-end protection. Also included is a 1/8″ NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.

Product Features:
  • Durable Cast Aluminum
  • Magnetic Drain Plug Captures Loose Particles
  • Calibration Plug Set to Factory Fill Level Eliminates Overfilling
  • Built-In External and Internal Fins Dissipate Heat
See More

Rancho – rockGEAR Differential Cover (Part No.RS62119)

rockGEAR Differential Cover

from

$238.99
Designed to shield your differential from direct contact in severe off-road conditions, the Rancho® rockGEAR® front differential cover for the Jeep® Wrangler JL is manufactured from high-strength nodular iron for added axle and internal gear protection.

Product Features:
  • COMPATIBILITY — Fits Jeep Wrangler JL, Dana 44
  • BUILT FOR THE TRAIL — Protects differential cover from rocks and other obstacles while off-roading, rock crawling and trail riding
  • ADDED PROTECTION — Mounts to Dana 44 front differential for added axle and internal gear protection
  • EXTRA STRENGTH — Ribbed external construction for added strength
  • RESISTS CORROSION — Durable red powder-coat finish resists rust and corrosion
  • ENGINEERED TO LAST — High-strength ductile iron steel construction for added axle and internal gear protection
  • ACCESS FOR FILLING — Off-set, oversized fill plug for increased fluid capacity and easier/quicker filling
See More

Rancho – rockGEAR Differential Cover (Part No.RS62120)

rockGEAR Differential Cover

from

$238.99
Designed to shield your differential from direct contact in severe off-road conditions, the Rancho® rockGEAR® rear differential cover for the Jeep® Wrangler JL and Gladiator JT is manufactured from high-strength nodular iron for added axle and int

Product Features:
  • COMPATIBILITY — Fits Jeep Wrangler JL and Gladiator JT, Dana 44
  • BUILT FOR THE TRAIL — Protects differential cover from rocks and other obstacles while off-roading, rock crawling and trail riding
  • ADDED PROTECTION — Mounts to Dana 44 rear differential for added axle and internal gear protection
  • EXTRA STRENGTH — Ribbed external construction for added strength
  • RESISTS CORROSION — Durable red powder-coat finish resists rust and corrosion
  • ENGINEERED TO LAST — High-strength ductile iron steel construction for added axle and internal gear protection
  • ACCESS FOR FILLING — Off-set, oversized fill plug for increased fluid capacity and easier/quicker filling
See More

Motive Gear – Differential Ring and Pinion (Part No.D30-456RJK)

Differential Ring and Pinion

from

$235.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Motive Gear – Differential Ring and Pinion (Part No.D30-513RJK)

Differential Ring and Pinion

from

$209.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Motive Gear – Differential Ring and Pinion (Part No.D30-488RJK)

Differential Ring and Pinion

from

$206.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Top-Rated Drivetrains Brands For Your 2021 Jeep Wrangler

Shop for the best-rated brands offering Drivetrains and other products for your 2021 Jeep Wranglers. Below you’ll find some of our best rated Drivetrains from Royal Purple, Valvoline, and Spicer, and more. Drivetrains from these brands that fit a 2021 Wrangler start at just $12.99 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Royal Purple 2021 Jeep Wrangler Drivetrains

When it comes to maintaining or upgrading your 2021 Jeep Wrangler, using quality Drivetrains is essential to ensure durability and a perfect fit. Royal Purple ticks all of those boxes. We offer a wide selection of Royal Purple Drivetrains, specifically designed for the 2021 Jeep Wrangler. With over 3 Royal Purple brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.99, with an average price of just $17.32. Plus, with over 139 customer reviews and an average rating of 5 stars, you can trust that our Royal Purple Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)
from
$12.99
This product is not rated

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

“”

Popular Valvoline 2021 Jeep Wrangler Drivetrains

Valvoline auto parts is one of the highest quality Drivetrain brands in the market. Any 2021 Jeep Wrangler owner should feel confident when installing genuine Valvoline parts in their vehicle. To ensure the best fit and performance for your 2021 Wrangler, Advance Auto Parts carries a full inventory of 2 Valvoline Drivetrains. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Valvoline Drivetrains range from $19.99 to $69.99, plus, with more than 364 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon
from
$69.99

(364)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon

“Worked well. Smells like sulfur if you get on your clothes.”

FAQs for 2021 Jeep Wrangler Drivetrains

Which Drivetrains are best-sellers for 2021 Jeep Wranglers?

Out of 42 Drivetrains that fit 2021 Jeep Wranglers, the following parts are the top sellers:

What’s the price range for 2021 Jeep Wrangler Drivetrains?

Drivetrain prices for the 2021 Jeep Wrangler start at $5.49 and go up to $1,036.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2021 Jeep Wrangler?

The average price for Drivetrains for the 2021 Jeep Wrangler is $226.99. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Jeep Wrangler model years?

Yes, we currently carry Drivetrains for 36 model years of Jeep Wranglers between 1987 and 2024. Drivetrains are bought most frequently for the following model years: 2023, 2022, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Drivetrains for my 2021 Jeep Wrangler?

The cheapest 2021 Jeep Wrangler Drivetrains we carry in stock are:

What are the top-rated Drivetrains that fit the 2021 Jeep Wrangler?

Out of 12,696 reviews by customers, our 2021 Jeep Wrangler Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2021 Jeep Wrangler and their top-rated products:

What types of Drivetrains do you sell for my 2021 Jeep Wrangler?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 2021 Jeep Wrangler:

Can I get help with 2021 Jeep Wrangler Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Drivetrains and more.

What is your return policy for Jeep Wrangler Drivetrains?

Advance Auto Parts keeps returns simple. For new Jeep Wrangler Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.