Name: Wire Assembly
Brand: Motorcraft
SKU: WPT-322
Price: 69.99 USD

from

$69.99

Wire Assembly

from

$75.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$67.99

CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:

Each unit is 100% tested to OE specifications.
Includes new o-rings and seals made of premium OE quality materials.
Includes application specific technical bulletin, where applicable.

from

$314.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$35.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$126.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$105.77

The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles.

Product Features:

Helps ensure optimal performance and durability
Designed for long service life under harsh conditions in under-hood environment
Works with other vehicle sensors to deliver optimal fuel efficiency and emissions
Adherence to OE specs helps minimize repeat repairs and false Check Engine warnings
Design includes OE innovations and upgrades
100 percent coverage of Ford and Lincoln vehicles

from

$95.93

Motorcraft MAP sensors are the only MAP sensors recommended by Ford Motor Company for use in Ford and Lincoln vehicles.

Product Features:

New and remanufactured available to help meet your customers’ needs
Units come ready to plug and play, with no need for modifications
Optimizes fuel consumption and emissions to help ensure vehicles meet various state smog-level requirements
Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
Design includes OE innovations and upgrades

from

$102.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$28.26

Fuel Sender Lock Rin

from

$542.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
Meets OE specifications

from

$17.92

Air Mass Sensor

from

$86.43

Re-engineered to address failure points in the original materials and design, Dorman’s Fuel Pump Driver Module is powder-coated for high corrosion resistance and long-lasting durability. Newly designed rubber bushings on the mounting screws help to sustain years of service.

Product Features:

Dorman’s fully re-engineered micro-processor provides greater response time and reliability
Comes with rubber mounting bushings to position the module away from the steel frame for increased protection from corrosion and damage to the metal housing
Regulates voltage to the fuel pump in order to maintain proper fuel pressure over the full operating range of the engine
Vehicle simulator testing has been conducted on this part to ensure quality performance

from

$15.99

Product Features:

Premium OE quality materials
Includes upper o-ring
Includes upper o-ring retainer
Includes plastic washer
Includes combustion seal
Includes retainer clip

from

$111.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$191.34

Motorcraft, Fuel Injector O-Ring Kit

from

$297.99

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:

Reduces Throttle Response Time
Improves Acceleration
Easy To Install
Does Not Affect The Vehicles Electronic System

from

$19.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$49.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$80.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$51.32

Vapor Canister Vent

from

$75.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$91.71

Vapor Canister Vent

from

$90.99

A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.

Product Features:

Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
Quality construction – manufactured from premium materials for a long service life
Excellent value – original equipment function at a lower price
Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance

from

$33.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.