2021 Ford F-350 Super Duty Exhaust System Kits

Our Black Series performance exhaust systems offer a true murdered-out style without compromising on quality and performance. With fully sealed seams to resist rust you can count on this system to really hold up. The black coat finish is specifically formulated to withstand the extreme heat and abrasive conditions an exhaust system is exposed to.

Product Features:

• Black Series Cat Back System
• Built To Perform, Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures Your Truck Will Use Less Gas, Last Longer And Perform Better
• Dyno Proven From The Vehicle Specific Muffler Design To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Your System Gets Exhaust Out Fast
• Exhaust System Is The Starting Point To Getting The Most From Cold Air Intakes, Programmers, Modules And Downloaders
• Sound And Style Specifically Tuned To Get The Optimal Sound From Your Ride
• Built To The Most Exacting Standards In The Industry
• Easy To Install, Bolt-On, No Weld Design Makes Installation A No Hassle One And A Half To Two Hour Project

Force II Kit

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19351 brings out the personality of your 6.2L 2017-2022 Ford with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19351 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19351 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

aFe’s Rebel XD Series DPF-back exhaust system performs as good as it looks. Made with 4″ mandrel bent 409 stainless steel tubing to improve exhaust flow for more HP, torque and lower EGT’s. The Rebel XD is MIG welded for durability and includes high quality hardware to provide a quick, hassle-free installation. Finished with dual 5″ black stainless steel tips with intercooling vents make it the perfect combination of performance, value and style.

Product Features:

• MIG Welded
• Factory Mounting Locations
• High Quality Band Clamps

Flow and Performance: This ATLAS exhaust system is 100% hand MIG-welded and Constructed from 4″ mandrel-bent aluminized steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. A mitered merge collector is also incorporated to eliminate dead space that can cause turbulence and hinder flow. Perfect Fit: This system uses all factory mounting locations providing stability. Includes OE-style bayonet hangers which are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Some cutting maybe required during install. Please see instruction sheet for Cab configuration for further details. 5″ Angle-Cut Rolled Edge Polished Intercooled Clamp-On Tips: Finishing off the exhaust are dual side exit 5″ stainless steel intercooled clamp-on tips with a polished finish. A unique laser-cut aFe Power logo plate is riveted on for an aggressive style.

Product Features:

• Mandrel Bent Aluminized Steel Tubing
• Dual Side Exit
• Matte-Black Stainless Steel Clamp-On Tips
• Tips w/Laser-Cut Stainless Steel aFe Power Plate

aFe POWER’s Rebel XD Series DPF-back exhaust system performs as good as it looks. Made with 4″ mandrel bent 409 stainless steel tubing to improve exhaust flow for more HP, torque and lower EGT’s. The Rebel XD is MIG welded for durability and includes high quality hardware to provide a quick, hassle-free installation. Finished with dual 5″ polished stainless steel tips with intercooling vents make it the perfect combination of performance, value and style.

Product Features:

• MIG Welded
• Factory Mounting Locations
• High Quality Band Clamps

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4″ mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with single gloss black 304 stainless steel, single wall slash cut tip for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Free Flowing Muffler
• Smooth Curves
• Hassle Free Installation

ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel – a value-oriented material that will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you are looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you Do not find yourself faced with lots of precipitation and salt, this is all you are ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine cylinders, allowing it to produce more power and improve vehicle performance and longevity.

Product Features:

• Rugged 16 Gauge T409 Construction
• More Pulling Power, Improved Throttle Response And Greater Fuel Efficiency
• MBRP Performance Exhaust System Has Been Specifically Tuned To Get The Optimal Sound From Pickup
• Stamped Logo On The Tip And Unmistakable Styling
• Bolt-On, No Weld Design Makes Installation A No Hassle One

The MagnaFlow Black Series Filter-Back Performance Exhaust System 17067 17067 brings the dyno-proven performance and deep resonating sound that we’re known for to your 6.4L, 6.7L 2008-2023 Ford in premium kit that includes tailpipe with a premium black powder-coated finish. This Ford exhaust system is designed to produce Mild interior and Moderate exterior sound levels thanks to clever tuning of its fast-flowing mandrel bent 5in. diameter main piping that ends in a Single Passenger Side Rear exit with 6in. Black Coated Welded-On Single Wall Angle Cut Rolled Edge tips. Exhaust kit 17067’s filter-back layout features a direct-fit, easy-to-install design and is made of strong, corrosion-resistant stainless steel. It is produced using CNC precision robotic manufacturing techniques and backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Mandrel Bent Tubing
• 409 Stainless Steel Construction with High Temp Satin Black Coating
• 300 Series Stainless Steel Black Coated Intercooled Tip(s)

Flow and Performance: This ATLAS exhaust system is 100% hand MIG-welded and Constructed from 4″ mandrel-bent aluminized steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. A mitered merge collector is also incorporated to eliminate dead space that can cause turbulence and hinder flow. Perfect Fit: This system uses all factory mounting locations providing stability. Includes OE-style bayonet hangers which are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Some cutting maybe required during install. Please see instruction sheet for Cab configuration for further details. 5″ Angle-Cut Rolled Edge Polished Intercooled Clamp-On Tips: Finishing off the exhaust are dual side exit 5″ stainless steel intercooled clamp-on tips with a polished finish. A unique laser-cut aFe Power logo plate is riveted on for an aggressive style.

Product Features:

• Mandrel Bent Aluminized Steel Tubing
• Dual Side Exit
• Polished Stainless Steel Clamp-On Tips
• Tips w/Laser-Cut Stainless Steel aFe Power Plate

The MagnaFlow Pro Series Filter-Back Performance Exhaust System 17872 17872 utilizes its weight-optimized, durable, corrosion resistant stainless steel design to enhance your 6.4L, 6.7L 2008-2023 Ford with MagnaFlow’s signature sound and dyno-tested performance. 17872’s 5in. diameter mandrel bent main piping features a muffler delete and terminates in a Single Passenger Side Rear exit with 6in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips. This emissions-legal filter-back exhaust kit has been tuned to create Mild interior and Moderate exterior sound levels. Exhaust system 17872 is emissions-legal and produced using CNC precision robotic manufacturing techniques that result in a direct-fit design that you can install yourself, all backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Throaty, powerful performance sound Magnaflow is famous for
• Attention grabbing design thanks to an aggressive style
• Intercooled tips

aFe LARGE BORE HD exhaust systems are constructed from mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque, while decreasing EGT. The 2-piece design and bayonet style hangers provide stability and for an easy installation. Finishing off the exhaust is a black, stainless steel slash cut tip with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style.

Product Features:

• Constructed Of Mandrel Bent Stainless Steel
• Increased Flow And Performance
• High Quality Band Clamps
• OE Style Bayonet Hangers

Interested in a new exhaust system for your 6.7 L Power Stroke. Check out the ATLAS DPF-Back exhaust system by aFe. Constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. Also included is a massive 7 in. wrinkle-black powder-coated 304 stainless steel tip with laser-cut stainless steel aFe power badge. The tip features a drain port on the bottom to keep rust and corrosion away. A unique stainless steel laser-cut aFe Power logo plate is rived on for an aggressive style. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• Mandrel Bent Aluminized Steel Tubing
• High Quality Band Clamp/OE Style Bayonet Hangers For Secure Fit
• Utilizes All Factory Mounting Locations
• Quick Hassle Free Installation

aFe LARGE BORE HD exhaust systems are constructed from mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque, while decreasing EGT. The 2-piece design and bayonet style hangers provide stability and for an easy installation. Finishing off the exhaust is a black, stainless steel slash cut tip with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style.

Product Features:

• Constructed Of Mandrel Bent Stainless Steel
• Increased Flow And Performance
• High Quality Band Clamps
• OE Style Bayonet Hangers

Our Black Series performance exhaust systems offer a true murdered-out style without compromising on quality and performance. With fully sealed seams to resist rust you can count on this system to really hold up. The black coat finish is specifically formulated to withstand the extreme heat and abrasive conditions an exhaust system is exposed to.

Product Features:

• Black Series Diesel Particulate Filter (DPF) Back System
• Built To Perform With More Pulling Power, Improved Throttle Response And Greater Fuel Efficiency
• Drops Exhaust Gas Temperature By Up To 200 Degree Fahrenheit And Minimizes Backpressure
• From The Spiral Louvered High Flow Muffler To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Gets Exhaust Out Fast
• Specifically Tuned To Get The Optimal Sound From Pickup
• New Stamped Logo On The Tip And Unmistakable Styling
• Everything Is Direct Fit To The OEM Hangers
• Bolt-On, No Weld Design Makes Installation A No Hassle, One And A Half To Two Hour Project

Interested in a new exhaust system for your 6.7 L Power Stroke. Check out the ATLAS DPF-Back exhaust system by aFe. Constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. Also included is a massive 7 in. wrinkle-black powder-coated 304 stainless steel tip with laser-cut stainless steel aFe power badge. The tip features a drain port on the bottom to keep rust and corrosion away. A unique stainless steel laser-cut aFe Power logo plate is rived on for an aggressive style. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• Mandrel Bent Aluminized Steel Tubing
• High Quality Band Clamp/OE Style Bayonet Hangers For Secure Fit
• Utilizes All Factory Mounting Locations
• Quick Hassle Free Installation

MBRP XP Series is the performance exhaust of choice for the enthusiast who needs a system that can take anything that the road throws at it. This system rugged sixteen gauge T409 construction can be counted on to withstand everything from salt to rocks, tar to grime.

Product Features:

• Built To Perform With More Pulling Power, Improved Throttle Response And Greater Fuel Efficiency
• Rugged Sixteen Gauge T409 Stainless Steel Construction Can Be Counted On To Withstand Everything From Salt To Rocks, Tar To Grime
• Drops Exhaust Gas Temperature By Up To 200 Degree Fahrenheit And Minimizes Backpressure
• From The Spiral Louvered High Flow Muffler To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Gets Exhaust Out Fast
• Specifically Tuned To Get The Optimal Sound From Pickup
• Everything Is Direct Fit To The OEM Hangers
• Bolt-On, No Weld Design Makes Installation A No Hassle, One And A Half To Two Hour Project