2021 Chevrolet Silverado 1500 Exhaust Parts

Essential 2021 Chevrolet Silverado 1500 Exhaust Parts

Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18823)

SoundFX Muffler, Direct Replacement, No Fabrication Needed

from

$78.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.21356)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$142.99
The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

ACDelco – Professional RapidFire Performance Platinum Spark Plug (Part No.F1000582337ACD)

Professional RapidFire Performance Platinum Spark Plug

from

$6.22
Designed for today’s most popular autos, ACDelco’s RapidFire Platinum Spark Plugs fit engines using conventional plugs, as well as newer vehicles requiring platinum performance.

Product Features:
  • Ribless insulator that improves the plug-to-boot seal.
  • Tapered center wire electrode with a platinum pad reduces the firing diameter and helps improve the firing efficiency by concentrating and directing energy needed to fire the plug with less voltage.
  • Solid state suppressor with two-piece glass and brass seal helps reduce radio frequency interference, meters spark plug energy to help provide long electrode life and seals against compression leakage. When compared to conventional spark plugs:
  • Reduced sparking voltage.
  • Greater corrosion protection.
  • Longer life and improved efficiency.
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61559)

Exhaust Pipe Flange Gasket

from

$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61074)

Exhaust Pipe Flange Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61287)

Exhaust Pipe Flange Gasket

from

$8.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 95842)

EXHAUST MANIFOLD GASKET SET

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97405)

Exhaust Manifold Gasket Set

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66078)

Seal-4-Good Header Flange Gasket

from

$48.99
Seal-4-Good Header Flange Gasket

Mr. Gasket – Exhsthdrbolt (Part No.2235G)

Exhsthdrbolt

from

$58.99
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.

Product Features:
  • 12 per Package
  • Includes Ball Head Socket Tool – to Start Header Bolt Into Head
  • 410 stainless steel
  • Minimum 180,000 PSI tensile strength
  • 24 equally spaced clockwise teeth
See More

Mr. Gasket – Black Oxide Header Bolts for Tight Spaces (Part No.918G)

Black Oxide Header Bolts for Tight Spaces

from

$12.79
Black oxide finished carbon steel header bolts have a compact hex head and the flange is ideal for use where space is minimal – your typical header flange. Includes twelve (12) M8 – 1.25 x 25mm header bolts.

Product Features:
  • 12 per Package
  • Fits GM LS Series Engines
  • Black Oxide Finish Resists Corrosion
See More

ARP Auto Racing – For Use With Chevy Ls V8 Engine, M8 Thread Size, Hex Head, Black Oxide, Set Of 12 (Part No.134-1102)

For Use With Chevy Ls V8 Engine, M8 Thread Size, Hex Head, Black Oxide, Set Of 12

from

$41.49
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.

Product Features:
  • Material Is Not Affected By Corrosion Or Extreme Heat
  • The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
  • Substantially Stronger Than Grade 8 Hardware
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Set of 12
  • 3/8” Wide Header Flange
  • 1.181? Underhead Length
See More

Dorman – Exhaust Manifold Clamp Repair (Part No.917-107)

Exhaust Manifold Clamp Repair

from

$51.99
This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
  • Location-specific – engineered to fit the exhaust manifold on specified GM and Isuzu vehicles on the front right on vehicles without EGR valve, or rear left
  • Complete kit – includes clamp and fasteners for a thorough, secure repair
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Exhaust Manifold Hardware Kit – M8-1.25 Stainless Steel (Part No.03413HP)

Exhaust Manifold Hardware Kit - M8-1.25 Stainless Steel

from

$28.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance
  • Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
  • Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Exhaust Manifold Repair Clamp (Part No.917-108)

Exhaust Manifold Repair Clamp

from

$31.99
This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
  • Location-specific – engineered to fit the exhaust manifold center on specified GM and Hummer vehicles
  • Complete kit – includes clamp and fasteners for a thorough, secure repair
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Exhaust Manifold Clamp Repair (Part No.917-142)

Exhaust Manifold Clamp Repair

from

$47.99
This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
  • Location-specific – engineered to fit the exhaust manifold on the front left or rear right on specified GM and Isuzu vehicles
  • Complete kit – includes clamp and fasteners for a thorough, secure repair
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15318)

Street Series Cat-Back Performance Exhaust System

from

$1171.99
The MagnaFlow Street Series Cat-Back Performance Exhaust System 15318 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 4in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15318 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15318 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Borla Performance Exhaust – Cat-Back Exhaust System – ATAK (Part No.140537BC)

Cat-Back Exhaust System - ATAK

from

$1421.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:
  • Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
  • Each system is built from premium, high-quality austenitic T-304 stainless steel
  • Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15565)

Street Series Cat-Back Performance Exhaust System

from

$1138.99
The MagnaFlow Street Series Cat-Back Performance Exhaust System 15565 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15565 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15565 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Borla Performance Exhaust – T-304 Ss, 2.75" Dia, Single Exhaust With Dual Exit, Split 4" Round (Part No.140536)

T-304 Ss, 2.75" Dia, Single Exhaust With Dual Exit, Split 4" Round

from

$1374.99
BORLA(R) Cat-Back(TM) And Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere.

Product Features:
  • Built From Premium T-304 Austenitic Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
  • Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
  • Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive Sound Of Power Respected By Motoring Enthusiasts Everywhere
  • This System Features A Bright Chrome On T-304 Stainless Steel Tip
  • Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power, And Precision Computer-Controlled CNC Manufacturing Ensures An Accurate Fit
See More

MagnaFlow – D-Fit Performance Exhaust Muffler Replacement Kit Without Muffler (Part No.19491)

D-Fit Performance Exhaust Muffler Replacement Kit Without Muffler

from

$201.99
The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit Without Muffler 19491 19491 replaces the restrictive factory muffler of your Truck with fast-flowing mandrel bent 3.5in. tubing, while maintaining the OEM piping and tailpipe. Exhaust Muffler kit 19491 features a direct-fit, easy-to-install design and is produced using CNC precision robotic manufacturing techniques. This exhaust system’s durable, corrosion resistant stainless steel construction is backed by MagnaFlow’s limited lifetime warranty.

Product Features:
  • 409 Stainless Steel Construction
  • Mandrel Bent Stainless Steel Tubing
  • Maintains the OEM piping and tailpipe
See More

MagnaFlow – D-Fit Performance Exhaust Muffler Replacement Kit Without Muffler (Part No.19476)

D-Fit Performance Exhaust Muffler Replacement Kit Without Muffler

from

$201.99
The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit Without Muffler 19476 19476 replaces the restrictive factory muffler of your Truck with fast-flowing mandrel bent 2.75in. tubing, while maintaining the OEM piping and tailpipe. Exhaust Muffler kit 19476 features a direct-fit, easy-to-install design and is produced using CNC precision robotic manufacturing techniques. This exhaust system’s durable, corrosion resistant stainless steel construction is backed by MagnaFlow’s limited lifetime warranty.

Product Features:
  • 409 Stainless Steel Construction
  • Mandrel Bent Stainless Steel Tubing
  • Maintains the OEM piping and tailpipe
See More

Dynomax – Walker Exhaust 36490 Exhaust Bolt (Part No.36490)

Walker Exhaust 36490 Exhaust Bolt

from

$14.99
Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker is a ‘one-stop’ convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broad market, performance, and commercial vehicle applications. Walker delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.

Product Features:
  • Walker offers a variety of fastener styles and sizes for your installation needs
  • Manufactured from premium steel for durability
  • Designed to work seamlessly with Walker aftermarket replacement parts
  • Walker supplies all of the accessories you need to do the complete exhaust job
  • Walker fasteners provide OE-style design for easy use
See More

2021 Chevrolet Silverado 1500 Exhaust Parts

You count on your 2021 Chevrolet Silverado 1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 26 Exhaust Parts ranging in price from $5.29 to $1,938.99, you’re sure to find everything you need for your 2021 Chevrolet Silverado 1500.

Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 9 different brands like Dorman, Felpro, and Dynomax. 2021 Chevrolet Silverado 1500 Exhaust Parts start as low as $5.29!

One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 451 extensive product reviews on 2021 Chevrolet Silverado 1500 Exhaust Parts.

Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2021 Chevrolet Silverado 1500 below to get started!

Top-Rated Exhaust Parts Brands For Your 2021 Chevrolet Silverado 1500

Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2021 Chevrolet Silverado 1500 running right for years to come. In our inventory you’ll find brands like Dorman, Felpro, Dynomax, and even more.

Popular Felpro Exhaust Parts

You’ll find popular Felpro brand products across Exhaust Pipes. All are waiting to get your 2021 Chevrolet Silverado 1500 back on the road. Some of the top-rated Felpro products in these categories are:
Exhaust Pipe Flange Gasket
from $5.29
(12)
Exhaust Pipe Flange Gasket
Exhaust Pipe and Flange Gaskets
Exhaust Pipe Flange Gasket
from $6.79
(5)
Exhaust Pipe Flange Gasket
Exhaust Pipe and Flange Gaskets

Top-Rated Exhaust Parts


If are what you’re looking for, our inventory holds plenty. We stock brand Exhaust Parts for your 2021 Chevrolet Silverado 1500, and some of our most reviewed parts include:
Exhaust Manifold Hardware Kit
from $17.99
(17)
Exhaust Manifold Hardware Kit
Exhaust Manifold Hardware Kits

FAQs for 2021 Chevrolet Silverado 1500 Exhaust Parts

What are the most purchased Exhaust Parts for the 2021 Chevrolet Silverado 1500?

Out of 26 Exhaust Parts for the 2021 Chevrolet Silverado 1500, the most popular in our inventory are:
Walker Exhaust 36490 Exhaust Bolt
from $14.99
(1)
Walker Exhaust 36490 Exhaust Bolt
Exhaust Bolts
Exhaust Pipe Gasket
from $9.95
This product is not rated
Exhaust Pipe Gasket
Exhaust Pipe and Flange Gaskets
Exhaust Manifold Gasket Set
from $25.99
This product is not rated
Exhaust Manifold Gasket Set
Exhaust Manifold Gaskets