from

$10.99

New, Standard Replacement Driver Side Front Bumper Support

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Or Modifications Needed For Installation
Same Form Fit As OE

from

$349.99

The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.

Product Features:

Maximize Axle Travel
Smooth Axle Engagement And Disengagement
Enhance Suspension Performance
ProgressiveáSpring Rate
Absorbs Energy And Cushions Road Shocks
Stronger Than OEM Bumpstops
Easy Installation

from

$154.99

New CAPA Certified Standard Replacement Front Lower Bumper Air Shield, For 4-Wheel Drive Limited Models, With Chrome Trim

Product Features:

For 4-Wheel Drive Limited Models, With Chrome Trim, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$44.99

New Standard Replacement Driver Side Fender Liner, 17 Inch Wheels

Product Features:

17 Inch Wheels, Made Of Polyethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$29.99

New Standard Replacement Driver Side Front Bumper Cover Retainer Bracket, For Limited Model

Product Features:

For Limited Model, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$26.99

New Standard Replacement Passenger Side Front Bumper Cover Bracket

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$22.99

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$540.99

Westin R5 Nerf Step Bars have 5 inch wide step area with a unique molded polymer step pad design. R5 Nerf Step Bars are rocker panel mounted and include injection molded bracket covers for a full and stylized appearance. R5 LED Light Kit upgrade is available, sold separately.

Product Features:

Mount Kit Included
Rocker Panel Mounted
5 in. Wide Step Area
Injection Molded Polymer Step Pad
Incl. Injection Molded Bracket Covers
Optional LED Light Kit Available [Sold Separately]

from

$141.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille Molding Upper, Chrome, Bumper Mounted, Under Emblem. It is Designed to Replace Your Existing Grille Molding. Check to Be Sure it Fits Your Vehicle.

Product Features:

Chrome, Bumper Mounted, Under Emblem, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$362.99

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

Vehicle Specific Mount Kit Required; Sold Separately
Corrosion Resistant Extruded Aluminum Board
Slip Resistant Textured Step Surface
Injection Molded Polymer End Caps
Rocker Panel Gap Strip Included For Finished Look
Optional Light Kit Available PN[27-6000]

from

$621.99

Protects your front end from flying debris with 3.5 inches of oval steel tubing. These bull bars also boost your visibility with an integrated 20 inch LED light bar. The included heavy duty light bar illuminates your night driving with a bright flood beam pattern and is easily wired into your factory light wiring, or a wiring harness can be purchased separately. Available in black textured powder coat or polished T304 stainless steel finish. Our popular LUND bull bars may now be ordered with a wire harness kit. The wire harness kit is also sold separately for lighting and accessories up to 30 Amps. LUND’s bull bars with LED light bar and wiring kit is the total package to “see and be seen”, providing complete front end — style, lighting and protection.

Product Features:

Bull Bar with Light And Wiring

from

$64.99

New Standard Replacement Driver Side Front Bumper Cover Lower Molding, Chrome, Limited,

Product Features:

Chrome, Limited, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$28.99

New Standard Replacement Passenger Side Hood Hinge

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$64.99

Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Mirror Covers. Add Handles And Wheel Skins (Sold Separately) For A Factory-Style Package
Mirror Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Mirrors And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$4.79

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$61.10

Without Electric Motor The Original Equipment brand Window Regulator is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

OEM-Quality and Direct Fit replacement
OEM factory connections and fittings
Original Equipment Manufacturer

from

$94.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$44.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$79.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Power Door Mirror, With Heated Glass, Without Turn Signal, Without Puddle Lamp, Paint To Match. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:

With Heated Glass, Without Turn Signal And Puddle Lamp, Paint To Match, Convex Glass
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$78.99

Cracked mirror glass? This door mirror glass is precision-engineered to match the original door mirror glass of specific vehicle years, makes and models for a simple and permanent replacement job.

Product Features:

Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles
Seamless design – precisely cut to match the shape and look of the factory glass
Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
Easy installation – follow simple step-by-step procedure to swap out existing glass

from

$12.99

Replacement Mirror Glass. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

The most economical way to replace cracked Mirror glass
Glass measures 5 13/16″ tall by 6 7/8″ wide and 7 15/16″ diagonally
This glass fits Mirrors with Manual and Power functions only
Mounting tape included for low-hassle stick-on installation
Step-by-step instructions for easy installation

from

$79.99

Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$69.99

Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$39.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$55.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$45.49

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$40.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

2020 Toyota 4Runner Body Parts

More 2020 Toyota 4Runner Body Parts Categories

Essential 2020 Toyota 4Runner Body Parts

KAI – Front Driver Side Bumper Cover Bracket, Plastic (Part No.TO1042107)

Timbren SES – Rubber Spring, Helper Spring Kit, Frame Mount, 1800Lb Weight, Aeon Hallow Rubber (Part No.ABSTOF)

KAI – Bumper Air Shield (Part No.TO1091102C)

KAI – Fender Liner (Part No.TO1248198)

KAI – Bumper Cover Retainer (Part No.TO1042126)

KAI – Bumper Cover Bracket (Part No.TO1043125)

StrongArm – Liftgate Lift Support: 22.56" Ext Length, 6.25" Travel, 216 Lbs of Force, 1 Pk (Part No.C6550)

Westin – R5 Nerf Step Bars (Part No.28-51200)

KAI – New Standard Replacement Grille Molding Upper, Chrome, Bumper Mounted, Under Emblem (Part No.TO1216103)

Westin – Sure-Grip Running Boards (Part No.27-6110)

Lund – Bull Bar With Light/Wiring-Stainless Steel (Part No.47021218)

KAI – Bumper Cover Molding (Part No.TO1046101)

KAI – Hood Hinge (Part No.TO1236181)

COAST TO COAST – Top Half Cover, Chrome Plated, Abs Plastic, Set Of 2 (Part No.CCIMC67498T)

Dorman – Moulding Clip Head Dia 0.5 In. Shank Lng 0.62 In. Hole Dia 0.32 In. (Part No.963-529)

Dorman – Hood Insulator Clip (Part No.963-088)

Original Equipment – Power Window Regulator (Part No.O3040159146OEA)

Dorman – Window Regulator: Power, 1 Pack (Part No.740-360)

Burco – Side View Replacement Mirror (Part No.3234)

KAI – Mirror Assembly: Passenger Side, Power Adjustment, Heated, Foldable, 1 Pk (Part No.TO1321313)

Dorman – Help – Heated Plastic Backed Mirror Left (Part No.56423)

K-Source – Truck/ SUV Replacement Glass: Passenger Side, Convex Glass, Includes Mounting Tape and Instructions (Part No.90165)

COAST TO COAST – Chrome Plated Abs Plastic, With Door Handle Trim, Without Passenger Side Keyhole (Part No.CCIDH68552B)

COAST TO COAST – Chrome Plated, Abs Plastic, Levers Only, With Covers For 4 Doors (Part No.CCIDH68305B)

Dorman – Help – Exterior Door Handle (Part No.80355)

Dorman – Help – Exterior Door Handle Front Right Textured Black Without Keyhole (Part No.82498)

Dorman – Help – Exterior Door Handle Front/Rear LH/RH Textured Black W/Keyhole (Part No.82499)

Dorman – Help – Exterior Door Handle Rear Left, Rear Right Smooth Black (Part No.82495)

Popular 2020 Toyota 4Runner Body Parts Categories

2020 Toyota 4Runner Body Parts

FAQs for 2020 Toyota 4Runner Body Parts

What are the most purchased Body Parts for the 2020 Toyota 4Runner?