from

$34.99

Corroded, stripped or broken control arm bolt making suspension repair difficult. This new control arm bolt matches the fit and function of the original bolt, its hardened steel construction allowing for secure installation of the control arm.

Product Features:

Ideal replacement – this control arm bolt is a direct replacement for a corroded, stripped or broken original equipment control arm bolt
Durable construction – made of hardened steel to match the function and durability of the original part
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone material testing and validation to ensure proper fit and long service life

from

$306.99

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
Economical And Trouble Free
Simple And Easy To Install

from

$94.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$41.49

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The Highest Quality Replacement Strut Mount Available
Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
Superior Rubber Reduces Noise, Vibration And Harshness
Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
Matched Grade Studs And Nuts

from

$111.99

Rancho® Suspension Leaf Spring Block Kits are tailored to your specific application. Kits are used for extra lift, and sold in pairs with the blocks being made in black polyurethane.

Product Features:

Kits are tailored to your specific application
Quality part with long service life
Blocks are made in black polyurethane
Sold in pairs
Used for extra lift

from

$14.49

Driveworks Brand Control Arm Bushings are made to meet OE specifications. They play a role that isolate the high-frequency inherent vibration from the vehicle. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Replacement helps reduce vehicle noise and sway while turning

from

$246.99

Skyjacker(R) suspension leveling kits are just what you need to get your truck or suv riding level again. They feature specially designed spacers to give you the additional lift necessary to make your vehicle stance level. Available for either the front or rear, these skyjacker suspension leveling kits are an excellent choice to lift your truck or suv.

Product Features:

6 Leveling Kit Merchandiser Packages To Choose From, With The Hottest Moving Applications
Levels Out Factory Rake Not Affecting Your Ride Quality
Allows For The Use Of Larger Wheel And Tire Combinations
Easy To Install, Spacers Mount On Top Of The Strut, No Strut Compressor Required
Limited Lifetime Warranty

from

$51.99

Daystar Comfort Ride Suspension systems are truly Driven by Design. Comfort Ride kits are specially designed to work with stock suspension components to keep costs down and quality high. High-density Progressive Polyurethane strut and spring spacers act as isolators to combine moderate amounts of lift without losing the comfortable ride you have come to expect. In torsion bar applications, re-indexed torsion keys allow you to dial-in the desired amount of lift in order to plus-size tire and wheel packages. These front lifts are often combined with Daystar Greaseable Super Shackles, add-a-leafs, or blocks and u-bolts to provide complete front and rear kits. Daystar offers a the most complete line of kits for most of the popular vehicles, including virtually all late-model domestic and import applications Almost all of the lift and leveling kits used on strut applications feature an easy-install design, no disassembly of the strut is required Comfort Ride Kits are the perfect start to achieving that custom look without compromising performance, reliability, or affordability.

Product Features:

No Metal-On-Metal Contact, Daystar Uses Polyurethane Material In Its Leveling Kits For A Reason, It is An Insulator, Absorbs The Noise, Vibration And Harmonics (NVH) That Come From The Suspension
Maintains Factory Ride Quality, Daystar Products Work With The Factory Springs With No Preloading Involved, So Vehicle Will Ride Just Like It Did Off The Showroom Floor
Long Lasting Finish, Polyurethane Is Resistant To The Elements, Road Grime And All Automotive Chemicals, So Comfort Ride Kits Will Look Just Like They Came Out Of The Box For Years To Come
Top Mount Easy Install Design

from

$1168.99

aFe Control introduces these Sway-A-Way High Performance replacement Coilovers for the 2010-2020 Toyota 4Runner and 2010-2014 FJ Cruiser. These 2.0″ diameter Coilovers feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These front Coilovers are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. The kit comes pre-set for 2″-2.5″ of lift. Also included is a spanner wrench for you to adjust your ride height to find your perfect blend of performance and style. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

CNC Machined Components Made To The Strictest Tolerances
Polished Nitro Steel Shaft for Strength And Durability
Teflon Lined Steel Spherical Bearings
Multi-Seal Carrier To Ensure Zero Leakage

from

$135.99

Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs

from

$796.99

aFe Control introduces these Sway-A-Way High Performance replacement shock absorbers for the 2003-2020 Toyota 4Runner and 10-14 FJ Cruiser. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

CNC Machined Components Made To The Strictest Tolerances
Polished Nitro Steel Shaft for Strength And Durability
Teflon Lined Steel Spherical Bearings
Multi-Seal Carrier To Ensure Zero Leakage

from

$74.99

Shock Kit

from

$142.99

Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs

from

$208.99

A strut assembly handles vehicle weight, determines ride height, acts as the steering pivot, controls vehicle stability and can affect a vehicles electronic crash avoidance systems. As an original equipment supplier, KYB understands how your vehicle should ride, handle and perform. The KYB Strut-Plus is engineered to help restore the handling and control capabilities of your vehicle. We start with an Original Equipment (OE) Restoring KYB Strut. High carbon steel coil springs are developed considering vehicle attributes and corners weights to help make sure the ride height is restored within OE specifications.

Product Features:

#1 Recommended Original Equipment Replacement Choice For Asian Vehicles
Designed For Proper Ride Height And Original Handling Capabilities On Toyota Subs
Includes A KYB Excel-G Strut, A Stronger Steel Outer Shell And KYB’S Application Specific Precision Designed Damping Valves
Winner Of 2018 Best Overall Import Aftermarket Product
Assembled In Use
Exact Fitment Engineered And Pre-Assembled For Professional Results
Features An Application Engineered KYB Spring Designed To Match The Strut, Maintain Proper Ride Height Longer And Control Weight Without Sacrificing Vehicle Ride Quality
Left And Right Part Numbers With Side-Specific Design And Components, As The Vehicle Manufacturer Intended
Engineered To Help Vehicles With Electronic Safety Systems (Esc, Abs, Etc.)

from

$1102.99

aFe Control introduces these Sway-A-Way High Performance replacement shock absorbers for the 2003-2020 Toyota 4Runner and 10-14 FJ Cruiser. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. Also included are rear coil springs that provide 1″-2″ of lift. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

CNC Machined Components Made To The Strictest Tolerances
Direct Fit Installation
Coil Springs Included for an Additional 1-2″ of Lift
2 Year Limited Warranty

from

$89.55

Control Arm

from

$354.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Engineered to match or exceed OE requirements
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose

from

$65.50

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$58.99

MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:

Engineered to meet or exceed OE requirements
Superior rubber to steel bonding for durability
High polish chrome steel bearing races
Replacement helps restore vehicle handling
Includes new spring seat insulator and installation hardware to eliminate noise issues
Electroplate and corrosion-resistant coating to help prevent galvanic corrosion

from

$61.99

The shock that started it all! Rancho® RS5000™ series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000™ is ideal for on and off-road use, at an affordable price. Cover

Product Features:

Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
Protective boot included – Protects the shock rod and oil seal
Limited Lifetime Warranty – Guarantees your investment

from

$65.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

#1 Recommended Original Equipment Replacement Choice For Import Trucks
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Toyota Truck
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

from

$487.99

Level out the front of your Toyota® Tacoma truck or 4Runner SUV by 2.25-in. with the LEVEL IT system from Rancho®. This leveling system features sway bar spacers and Rancho RS9000®XL struts for superior on-road comfort and off-road performance.

Product Features:

COMPATIBILITY — Designed for Toyota Tacoma trucks and 4Runner SUVs
LEVELED STANCE — Reduces factory rake and levels out truck’s stance by 2.25-in. (aftermarket bumpers, winches, etc. affect lift height)
COMPLETE SOLUTION — Kit includes two sway bar spacers, two Rancho RS9000®XL struts (coil springs not included) and mounting hardware to accommodate tires up to 33-in. (must use OE springs and top mounting components)
DELIVERS SUPERIOR PERFORMANCE — Rancho RS9000®XL struts with nine-position damping control for superior on-road comfort and off-road performance
ENHANCED CONTROL — Sway bar spacers correct end link angles for roll and sway control
EASY TO INSTALL — Bolt-on installation for an easy upgrade
COMPLETE PERFORMANCE UPGRADE FOR TACOMA– Transform your suspension with Rancho RS9000®XL rear shocks (RS999319), performance upper control arms (RS64901) and rear block kit (RS70901), all sold separately
COMPLETE PERFORMANCE UPGRADE FOR 4RUNNER — Transform your suspension with Rancho RS9000®XL rear shocks (RS999305), performance upper control arms (RS64903) and rear block kit (RS70080), all sold separately
NOTES — Allows the use of OE wheels/tires, must use OE springs and top mounting components, trimming required for 33-in. wheel/tire (tire size varies between manufacturers)

from

$6.29

Max Performance Synthetic Power Steering Fluid

from

$11.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$14.99

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
Formulated to help prevent gear wear and protect against rust and corrosion
Formulated to deliver enhanced protection against deposits
Helps provide better protection during extreme operating conditions

from

$32.99

This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$36.49

This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$309.99

The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.

Product Features: