2020 Mazda CX-9 Serpentine and V Belts

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

• OE-Equivalent.
• Direct fit for easy installation.
• Resistant against wear, oil and heat.

The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) belts, they are the only belts recommended by Ford Motor Company. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

• Polyester cords resist stretching, minimize slippage and provide excellent performance with short adjustment drives
• Laminated die-cut edge design provides quiet, efficient operation
• Stands up to grease, oil, dirt and high temperatures
• Flexes easily around the smallest pulley
• Helps preserve belt strength
• Helps eliminate rough edges present on cut-cog designed belts
• Provides quiet operation

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

• Designed for two- to four-point drives that do not require automatic or manual tensioning
• Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
• Elasticity allows for long-lasting performance and proper tension

Stretch Fit Drive Systems Demand Highly Engineered Solutions.

Product Features:

• Specially formulated adhesive literally locks onto the cord, allowing the cord to elongate and stretch, but never lose tension
• Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile cord
• Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
• NOTE: Stretch Fit belts are single-use only and must be replaced if removed

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

• Constructed with heat and ozone resistant EPDM rubber
• Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
• Made with treated polyester cord to reduce belt stretch

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

• Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
• Engineered to help address noise issues caused by the belt drive 
• Capable of handling more extreme temperatures and workloads

Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:

• Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
• Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
• Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
• These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:

• Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
• Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
• Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
• These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:

• Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
• Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
• Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
• These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

• Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
• Engineered to help address noise issues caused by the belt drive 
• Capable of handling more extreme temperatures and workloads
• Made in the USA

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

• Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
• EPDM rubber constructions resist cracking on the rib surface
• Meets or exceeds all specifications from the Original Equipment Manufacturer
• Tensioner Replacement is Recommended (if equipped)
• Unique form grinding of each individual belt assures precise dimensional control.
• Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

• Designed for two- to four-point drives that do not require automatic or manual tensioning.
• Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
• Elasticity allows for long-lasting performance and proper tension
• Elasticityáallows for long-lasting performance and proper tension

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

• Designed for two- to four-point drives that do not require automatic or manual tensioning.
• Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
• Elasticity allows for long-lasting performance and proper tension
• Elasticityáallows for long-lasting performance and proper tension