2020 Ford Transit Connect Fuel and Emissions Systems
Find Your Specific 2020 Ford Transit Connect Fuel and Emissions Systems
Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 2020 Transit Connect. Advance Auto Parts has popular Transit Connect parts like Air Flow Sensors, Fuel Injectors, Fuel Pumps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Transit Connect model years including
2014,
2015,
2016,
2017,
2018,
2019,
2021,
2022,
2023 and more. Select a category of 2020 Ford Transit Connect Fuel and Emissions Systems below and start saving instantly.
Popular 2020 Ford Transit Connect Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 2020 Ford Transit Connects
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1101)
from
$8.99
The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
- Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 20.8" Long, Heated, Direct Fit (Part No.24348)
from
$141.99
NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Bosch – Fuel Injector: New (Part No.62383)
from
$61.99
Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, and Asian vehicles.
Product Features:
See More
Product Features:
- Guaranteed OE fit, form and function
- Manufactured of the highest quality materials
- Provides precision flow and original spray pattern for optimal performance
- Product includes top and bottom mounting o-ring
- Maintains new-car smoothness and drivability
Felpro – Fuel Injector O-Ring Kit (Part No.ES 73118)
from
$59.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECA1416)
from
$62.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Motorcraft – Original Equipment (O.E.) Gasket (Part No.CG-807)
from
$31.99
The only parts recommended by Ford Motor Company for Ford and Lincoln vehicles. Motorcraft Seals are designed and tested to Ford’s rigorous engineering standards. Motorcraft parts fit right the first time for quicker, easier installation.
See More
Dorman – Ambient Air Temperature Sensor (Part No.902-028)
from
$18.99
This ambient air temperature sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this ambient air temperature sensor is designed to match the fit and function of the original sensor on specified vehicles
- Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
- Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Motorcraft – Vpr Cnistr Purg Valv (Part No.CX-2695)
from
$64.99
Vpr Cnistr Purg Valv
Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)
from
$9.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Felpro – Engine Coolant Outlet Gasket (Part No.36043)
from
$8.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
Carquest Premium – Vapor Canister (Part No.CPN2419)
from
$96.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPA1061)
from
$76.99
Ensure that your vehicle’s emission control system performs at its best with Carquest premium Vapor Canister Vent Valves. Manufactured for long-lasting performance, these Vent Valves provide reliable operation and help maintain your vehicle’s compliance with environmental regulations. For cleaner emissions, optimal vehicle efficiency and perfomance, trust Carquest Vapor Canister Vent Valves.
Product Features:
See More
Product Features:
- Provides closure for the EVAP system (normally vented) during OBD II test cycle
- Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
- Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
- Meets or exceeds all OEM specifications
Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPC1279)
from
$76.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Dorman – Fuel Pump Relay Module (Part No.601-240)
from
$79.99
This fuel pump driver module is a direct replacement for the original equipment module. Designed to match the original fit and function, it features a plug & play connection for an easy installation.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pump driver module matches the fit and function of the original equipment module to restore vehicle operation
- Plug and play installation – this fuel pump driver requires no modifications or special tools to install
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Quality tested – vehicle simulation tested to ensure performance
Motorcraft – Wire Assembly (Part No.WPT-322)
from
$69.99
Wire Assembly
Carquest Premium – Multi-Use Connector (Part No.PTA2925)
from
$44.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0114)
from
$147.99
Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.
Product Features:
See More
Product Features:
- Hitachi is a Tier 1 OE supplier for air flow sensors
- 100% NEW, never remanufactured
- Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
- Precision manufactured and assembled sensing elements for accurate air flow measurements
Delphi – Mass Air Flow Sensor (Part No.AF10140)
from
$159.99
Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.
Product Features:
See More
Product Features:
- Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
- Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
- Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
- All parts are calibrated and tested to match the OE part
- Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
- Delphi OE technology validated to match the vehicle applications
Dorman – Multi-Purpose Pigtail Connector (Part No.645-323)
from
$31.99
Make better electrical repairs and accessory installations with this versatile and durable pigtail connector. It allows quick circuit disconnections for service, and is engineered for reliable performance.
Product Features:
See More
Product Features:
- Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
- Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Product Features:
Motorcraft – Original Equipment (O.E.) Valve – Exhaust Gas Recirculation (Part No.CX-2352)
from
$136.99
The only parts recommended by Ford Motor Company for Ford and Lincoln vehicles. Motorcraft Emissions components are designed and tested to Ford’s rigorous engineering standards. Motorcraft parts fit right the first time for quicker, easier installation.
See More
Carquest Premium – EGR Valve (Part No.EGC1035)
from
$87.99
Carquest Premium exhaust gas recirculation (EGR) valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Our Carquest Premium EGR valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium EGR valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium EGR valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Precision engineering and robust design to withstand harsh under hood environment
- Gaskets or seals are included if required for installation
- Extensive design validation testing and 100% end-of-line tested
- Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.71227)
from
$6.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Upgrade your 2020 Ford Transit Connect with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2020 Ford Transit Connect, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Transit Connect functioning at its best. At Advance Auto Parts, we offer a wide selection of 27 Fuel and Emissions Systems for the 2020 Ford Transit Connect, designed to meet your needs without breaking the bank.
From
Air Flow Sensor
replacements to
Fuel Injectors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2020 Ford Transit Connect at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $6.49 to $136.99, with
an average price of $55.80.
Our 27 Fuel and Emissions Systems in stock come from 8 trusted brands, so you’re sure to find the right part for your 2020 Ford Transit Connect without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 Ford Transit Connect, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like FELPRO Dorman, and more.
FELPRO Fuel and Emissions Systems
start at just $6.49 and boast an impressive 4.6 stars average rating from customers.
With 690 customer reviews and counting, our 2020 Ford Transit Connect Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2020 Ford Transit Connect is always ready to roll. We’re committed to providing you with everything you need to keep your Transit Connect in top shape, all in one place.
Start shopping confidently below for your 2020 Ford Transit Connect!
Best-Selling Air Flow Sensors for 2020 Ford Transit Connects
Enhance the driving experience in your Ford with 7 quality Air Flow Sensor components, starting at $30.99.
Motorcraft – Original Equipment (O.E.) Sensor Assembly – Tripminder (Part No.DY-1160)
from
$39.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Product Features:
See More
Product Features:
- Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
- Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
- As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1074)
from
$91.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 19.17" Long, Heated, Exact Fit (Part No.234-5176)
from
$101.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Motorcraft – Wire Assembly (Part No.WPT-322)
from
$69.99
Wire Assembly
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 19.75" Long, Heated, Direct Fit (Part No.27065)
from
$62.99
NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Dorman – Multi-Purpose Pigtail Connector (Part No.645-323)
from
$31.99
Make better electrical repairs and accessory installations with this versatile and durable pigtail connector. It allows quick circuit disconnections for service, and is engineered for reliable performance.
Product Features:
See More
Product Features:
- Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
- Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1251)
from
$30.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Most Popular 2020 Ford Transit Connect Fuel Injectors
Customize your Ford with 6 Fuel Injectors products
like Air Flow Meters and Mass Air,
Fuel Injectors, and
Fuel Injector O-Ring Kits, all
priced under $127.99.
Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)
from
$8.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)
from
$9.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Carquest Premium – Remanufactured Fuel Injector (Part No.A211-2102)
from
$35.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Bosch – Fuel Injector: New (Part No.62405)
from
$54.99
Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, and Asian vehicles.
Product Features:
See More
Product Features:
- Guaranteed OE fit, form and function
- Manufactured of the highest quality materials
- Provides precision flow and original spray pattern for optimal performance
- Product includes top and bottom mounting o-ring
- Maintains new-car smoothness and drivability
Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6421)
from
$127.99
CARQUEST MAF sensors are 100% new and are produced by a certified OEM supplier that designs and manufactures new mass air flow sensors
Product Features:
See More
Product Features:
- CARQUEST MAF use all new high-quality components at the highest quality standards.
- Manufactured with new and advanced technology to perform, fit and function at OE specifications.
- All new product that is tested with OEM equipment to OEM standards
- Outperforms competition when tested in extreme environmental conditions
Motorcraft – Fuel Injector O-Ring Kit (Part No.CM-4717)
from
$15.99
All Motorcraft Seal designs undergo rigorous lab and real world tests in order to provide original equipment performance and reliability. Motorcraft Seals are extensively tested for proper seating and sealing under both temperature and pressure extremes.
Product Features:
See More
Product Features:
- Why Buy:
- The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
- Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
- Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
- As with all Motorcraft and Ford Parts, any innovations or improvements developed since the manufacture of the vehicle are included in these aftermarket replacement parts, ensuring the most current technology and performance
Top Picks for 2020 Ford Transit Connect Fuel Pumps
Upgrade Ford Transit Connects with top-quality Fuel Pumps parts, including 1 OEM and aftermarket selections for your 2020 model.
Dorman – Fuel Pump Relay Module (Part No.601-240)
from
$79.99
This fuel pump driver module is a direct replacement for the original equipment module. Designed to match the original fit and function, it features a plug & play connection for an easy installation.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pump driver module matches the fit and function of the original equipment module to restore vehicle operation
- Plug and play installation – this fuel pump driver requires no modifications or special tools to install
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Quality tested – vehicle simulation tested to ensure performance
In-Demand Fuel Tanks for 2020 Ford Transit Connects
Select from 2 premium Fuel Tanks parts for your 2020 Ford Transit Connect, with prices ranging from $12.49 to $31.99.
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Motorcraft – Original Equipment (O.E.) Gasket (Part No.CG-807)
from
$31.99
The only parts recommended by Ford Motor Company for Ford and Lincoln vehicles. Motorcraft Seals are designed and tested to Ford’s rigorous engineering standards. Motorcraft parts fit right the first time for quicker, easier installation.
See More
Most Sold 2020 Ford Transit Connect Vapor Canister Purge Valves
Explore our best-selling Ford parts for the 2020 Transit Connect among 6 OEM and aftermarket options starting from $37.99.
Dorman – Evaporative Emissions Canister Vent Valve (Part No.911-216)
from
$105.99
A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.
Product Features:
See More
Product Features:
- Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment function at a lower price
- Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance
Carquest Premium – Vapor Canister Purge Solenoid: Includes Mounting Hardware (Part No.CPC1011)
from
$37.99
Maximize your vehicle’s efficiency and emissions control with Carquest Vapor Canister Purge Solenoids. Engineered for precision, these solenoids seamlessly regulate the flow of fuel vapors from the Vapor Canister to the engine for cleaner combustion, reducing harmful emissions. Built to meet and/or exceed OEM standards, Carquest Purge Solenoids offer reliable functionality, long-lasting durability, and easy installation.
Product Features:
See More
Product Features:
- Enhances overall engine performance by providing proper vapor flow to maintain correct air-fuel mixture.
- Helps reduce harmful emissions and ensures compliance with environmental regulations by controlling the release of fuel vapors into the engine
- Ensures precise operation with electromagnetic principles to control the flow of fuel vapors from the carbon canister to the engine
- Manufactured from high quality engineered materials, resistant to fuel vapors and extreme temperatures, ensuring long lasting performance
- Meets or exceeds all OEM specifications
Motorcraft – VALVE ASY (Part No.CX-2626)
from
$59.99
VALVE ASY
Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPA1061)
from
$76.99
Ensure that your vehicle’s emission control system performs at its best with Carquest premium Vapor Canister Vent Valves. Manufactured for long-lasting performance, these Vent Valves provide reliable operation and help maintain your vehicle’s compliance with environmental regulations. For cleaner emissions, optimal vehicle efficiency and perfomance, trust Carquest Vapor Canister Vent Valves.
Product Features:
See More
Product Features:
- Provides closure for the EVAP system (normally vented) during OBD II test cycle
- Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
- Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
- Meets or exceeds all OEM specifications
Carquest Premium – Vapor Canister (Part No.CPN2419)
from
$96.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Motorcraft – Vpr Cnistr Purg Valv (Part No.CX-2695)
from
$64.99
Vpr Cnistr Purg Valv
Top-Rated Fuel and Emissions Systems Brands For Your 2020 Ford Transit Connect
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2020 Ford Transit Connects. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO and Dorman, and more. Fuel and Emissions Systems from these brands that fit a 2020 Transit Connect start at just $6.49 and are rated as high as 4.6 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 2020 Ford Transit Connect Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2020 Ford Transit Connect, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 2020 Ford Transit Connect. With over 3 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.49, with an average price of just $7.16. Plus, with over 111 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$6.49
(1)
Exhaust Gas Recirculation (EGR) Valve Gasket
“I have not installed any of these parts yet but they all look clean and seem to have been built strong and with quality in mind.”
from
$6.49
(1)
Exhaust Gas Recirculation (EGR) Valve Gasket
“Fixed my problem and I’m back driving again”
Popular Dorman 2020 Ford Transit Connect Fuel and Emissions Systems
Dorman auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2020 Ford Transit Connect owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2020 Transit Connect, Advance Auto Parts carries a full inventory of 1 Dorman Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dorman Fuel and Emissions Systems range up to $105.99, plus, with more than 2 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.
from
$105.99
(2)
Evaporative Emissions Canister Vent Valve
“Where is it located in my ford ecosport 2018 1.0”
FAQs for 2020 Ford Transit Connect Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 2020 Ford Transit Connects?
Out of 27 Fuel and Emissions Systems that fit 2020 Ford Transit Connects, the following parts are the top sellers:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Original Equipment (O.E.) Sensor Assembly – Tripminder (11865690) – $39.99
- Fuel Injector Seal Kit (11692632) – $9.99
What’s the price range for 2020 Ford Transit Connect Fuel and Emissions Systems?
Fuel and Emissions System prices for the 2020 Ford Transit Connect start at $6.49 and go up to $136.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 2020 Ford Transit Connect?
The average price for Fuel and Emissions Systems for the 2020 Ford Transit Connect is $55.80. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford Transit Connect model years?
What are the cheapest Fuel and Emissions Systems for my 2020 Ford Transit Connect?
The cheapest 2020 Ford Transit Connect Fuel and Emissions Systems we carry in stock are:
- Exhaust Gas Recirculation (EGR) Valve Gasket (20688922) – $6.49
- Exhaust Gas Recirculation (EGR) Valve Gasket (20688962) – $6.49
- Fuel Injector O-Ring Kit (3504360) – $8.49
- Fuel Injector Seal Kit (11692632) – $9.99
- Fuel Tank Cleaning Kit (11692237) – $12.49
What are the top-rated Fuel and Emissions Systems that fit the 2020 Ford Transit Connect?
Out of 690 reviews by customers, our 2020 Ford Transit Connect Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2020 Ford Transit Connect and their top-rated products:
- Exhaust Gas Recirculation (EGR) Parts
- Exhaust Gas Recirculation (EGR) Valve Gasket (20688922) – $6.49
- Exhaust Gas Recirculation (EGR) Valve Gasket (20688962) – $6.49
- Vapor Canister Purge Valves
- Exhaust Gas Recirculation (EGR) Valve Gasket (20688922) – $6.49
- Exhaust Gas Recirculation (EGR) Valve Gasket (20688962) – $6.49
What types of Fuel and Emissions Systems do you sell for my 2020 Ford Transit Connect?
As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2020 Ford Transit Connect:
Can I get help with 2020 Ford Transit Connect Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.
What is your return policy for Ford Transit Connect Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Ford Transit Connect Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
